Got Boost? How about wild cams? Maybe a little bottle?
Let's see your build!
This was borrowed from a post on awdpirates.net. Thanks to Jon @ Flatirons Tuning for posting it up. ] If you are thinking about improving your car’s performance by bolting on anything from an intake and exhaust to fully rebuilding your engine with different cam’s or pistons, it is very...
ordered an rb25det about a month ago. we ran into a couple snags, broken oil pan, fried ecu, but nothing major. got it going last week and the torque curve is amazing, don't even feel any turbo lag. but there is still an exhaust leak at manifold/block since one of the studs are broken he...
just thought id share my build with you all. i started building hondas back in 03. ive been addicted to it ever since and figured id give a little history. i started out having a 91 crx si with a b 16 swap. tons of fun to drive and easy to swap. then i moved on to a 92 hatch that i put a one piece...
http://www.squirrelpf.com/turbocalc/ fill in info, calc map for hp goals vs turbo. You want your charted line to stay within the large eff range in the middle. You can chart one turbo and compare. Found it helpfull. Here is an example My 2jzgte stock motor 7600 rpm range 750 hp...
http://designcraftfab.com/online-store/category/6/development-parts/electronic-cam-system still no dyno or numbers for n/a out yet though
anyone getting any q16 fuel this year?
I was having a discussion about octane with someone and tripped on this while researching. I figured some of you nerds (like myself) would eat this up. The FAQ has 4 parts (FAQ part 1,FAQ part 2,FAQ part 3, FAQ part 4). It's a long read but full of lots of really good info, so if you want to learn...
Well a few weeks ago i dynoed the hoopty again after a couple min of tuning.. here are the details on my setup: 1995 Monte Carlo Z34 3.4L DOHC, 1996 Intake Manifolds/TB, Custom T04E "60" Turbo, Spearco I/C, Tial WG, Custom x-over and DP, OBDII Swap, Power Tuner tuning Software, 42.5# Inj., Walbro...
though id share my first build (very slow build) b18b1 block bored honed hot tanked for p73 pistons, bare pr3-4 head stage 1 port and polish .5 port on intake side and the polish job on the valve chamber, hastings piston rings......this is all i got so far
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules