Got Boost? How about wild cams? Maybe a little bottle?
Let's see your build!
Project USP Limited...
05-20-2013, 04:14 PM
This was borrowed from a post on awdpirates.net. Thanks to Jon @ Flatirons Tuning for posting it up. ]
If you are thinking about improving your car’s performance by bolting on anything from an intake and exhaust to fully rebuilding your engine with different cam’s or pistons, it is very...
Was wondering if anyone here has used (or considered) methanol/water injection for their builds? I'm
pretty new/unexposed to it and wanted to get your opinions on the process. I'm considering it down the road after I get some tuning issues ironed out.
Sounds pretty bad-ass!
weekend = ruined
open ended question - how far of a daily (roundtrip)commute would you tolerate to make $50k, $75k, $100k
$50k - up to 50miles
$75k - up to 60miles
$100k - up to 200miles
another thing that I didnt mention on Dave's thread was that I am en-route to become a professional engineer - I need +/-...
Finally after 10+ years, HAI old school member rmcdaniels was able to finally develop his supercharger kit "B series" and and should be on the market coming along here in 2012-2014... He was a Great Member and I remember him when i was 16 learning about the honda game. hope to see him do good with...
My neighbor has a 350Z and he just bought the Greddy twin 18G kit for his car. He's looking for someone to build the bottom end and install the turbo kit for him. He's hoping to hit 500+ whp, should be awesome.... :)
Anyone know a shop I could send him to?
Anyone have any knowledge of a how to? I found some of the nasioc stuff but i'm not sure if there's anything associated with the turbo specifically as the write ups are for VF series turbos.
I have a turbo RXS-S. I need to get it re-tuned. Who would you most likely recommend tuning and WHY?
1. Jeremy @ Revolutions
2. Brent @ PFI
Looking to get a bottom end bored and piston and rings installed in a b18b. What are some good shops in the Denver area but am willing to travel a little if there are better shops.
who is our local HAI shop who does PNP/Milling for Heads? i Need to have my RBC Port Match and Bored out
WARNING NON-IMPORT CAR BUILD, PLEASE STOP LOOKING IF YOU CAN'T STAND AMERICAN CARS!!
Everyone else welcome!! Just got done doing a roots style supercharger install on my car, thought I would post up some pics to share how it went.
Engine went from this:
Hey HAI - I've got a '03 350z - was wondering if you have a recommended tuners for a built-VQDE, running 10-15psi on centrifugal supercharger (procharger) and engine management with the haltech platinum. I have a guy I'm working with but I'm getting the run-around from him and it's really...
Hey guys, I'm looking for a good shop to rebuild my turbo. I need to check into a couple other things first, but it's looking like that's what's causing some issues I've been having. Anybody have someone that they've used in the past that did a good job?
It's a Turbonetics T3/T4 60-1, FWIW.
I've gotten hold of a bone stock Spectra 2009 and want to make a few mods to account for the altitude and acceleration uphill that can I can back out once I decide what to do with the motor on a permanent basis. The mill has just over 40K on it.
I have been looking for performance chips, but...
I have a buddy out here that owns a 2006 Subaru WRX STI, that unfortunately has to send out to get work done for his car. People out here do not, or will not work on imports. Import performance is a joke here. He sent his heads off for what he thought was a valve job and port and polish. This...
So here's the story. I was going to sell the Rex as most of you know, well didn't happen I boosted it instead. After spending a couple thousand on parts and rebuilding the bottom end with freash oem everything myself. I took my head to a reputable shop to get done with all new oem stuff and proper...
Finished building some new parts, so figured I would share the photos with ya to see what you think. Have some of them set up on a mock up engine, then I took photos of some of the parts separately.
Basically just trying to improve on the old systems I build and make improvements. The...
Looking to see if there is a local shop or dealer that would carry motul300 75w90 diff/trans oil. Need to do a flush and would prefer this
But seriously, how cool is this thing? I want one!
This is going to be a fun little go-cart. ::driver::
1995 miata 1.8 5sp.
Modifications: Welded diff, modified stock springs, modified tie rod ends, custom air intake, 2.25 exhaust (no cat), roll bar, 15x8 inch wheels +22 offset, nifty CD player....
I need a new downpipe section made, but i dont have the time right now or the money to pay the ridiucoulous base auto hobby shop to weld.
Does anyone know of any good shops in the Springs or surrouinding areas that does custom exhuast at a good price?
I already have a high flow cat, and o2...
Yet another CRN jacked post....
Finally, after years (yes, years) of hype, my car is getting boosted. I began this thursday and have been working around the clock. I've been sacrificing mind, body and soul ( I didnt go to church, not that i ever do) to attempt to get this done. There have been many trials and tests of strength...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.