PDA

View Full Version : B18B1 >> 5G Civic Dx is it possible, if so how?

5GCiViCDX-racer
03-11-2003, 10:28 PM
CAn you put a non-vtec 2000 Integra Gs engine is a 5G Honda civc DX Coup? if so then how and what do i need?
forum
03-11-2003, 10:53 PM
yes, you would need to convert it to obd-1, you need all 94-00 integra mounts. i wanna say its 90-93 integra intermediate shafts
if you are serious I can make a list
5GCiViCDX-racer
03-11-2003, 11:02 PM
i am serious thanks for you input i would appreatice any other references that you could point out to me so i can make this swap as painless to my wallet as possible
Derrickcxhatch
03-12-2003, 12:28 AM
You would need all integra mounts shift linkage and a obd 1 ecu. and a few days to do it if its youre first time.
95GSRB18C
03-12-2003, 01:01 AM
you can probably find a 94-95 LS (B18B1) for cheaper than the 96+ (OBDII). The swap can be ok but as mentioned above, you will need to convert it from OBDII to OBDI and i believe you can use the 94+ Integra axels also.
12seccivy
03-12-2003, 06:43 AM
Originally posted by 5GCiViCDX-racer
CAn you put a non-vtec 2000 Integra Gs engine is a 5G Honda civc DX Coup? if so then how and what do i need?

i'm not too sure on the context of this question.
are you thinking it will work with the civic transmission?
you will need the entire drivetrain from the integra(engine,axles,trans,mounts,ecu...etc)
the civic trans wont mate up nor will the axles
good luck and have fun
i always have fun when i do swaps:)
snydsam
03-12-2003, 09:41 AM
Are you doing the work? not to offend you but if you plan on doing this it is a bad ida. i can get it installed fast and do it right if you need it
5GCiViCDX-racer
03-12-2003, 04:09 PM
i am new to engine swapping and i am not sure what a obd-1 is and about the axels problems i dont see what doesn't match up, could you guys please explain this more explictedly because as you can see i am very hard headhead :)
5GCiViCDX-racer
03-12-2003, 04:13 PM
Originally posted by snydsam
Are you doing the work? not to offend you but if you plan on doing this it is a bad ida. i can get it installed fast and do it right if you need it



yes i am ding the work , but i have a friend who has his own auto shop and he plans on helping me with it, but i am unsure how good he is, and where do you live man i live in E.P.A. in Ca.
so for you to help me you would have to libe with 200 miles. and thanks for you input i appreate it.
5GCiViCDX-racer
03-12-2003, 04:14 PM
god help me and my crappy typing skills sorry for all the errors
Violator
03-12-2003, 07:23 PM
I have an extra upper driver side mount, you will most likely need one.
snydsam
03-13-2003, 02:57 AM
Originally posted by 5GCiViCDX-racer
yes i am ding the work , but i have a friend who has his own auto shop and he plans on helping me with it, but i am unsure how good he is, and where do you live man i live in E.P.A. in Ca.
so for you to help me you would have to libe with 200 miles. and thanks for you input i appreate it.


Im in denver sorry bro
Scuba_Steve
03-13-2003, 08:36 AM
All answers can be found here:

http://tech.hybridgarage.com/tech/index.html
5GCiViCDX-racer
03-13-2003, 05:42 PM
Originally posted by 92CX
All answers can be found here:

http://tech.hybridgarage.com/tech/index.html

Sweet ride man, wher did you get that b18c1, i have tried but to hard to find and when i di find it it cost way too much. Thanks for the reply
Violator
03-14-2003, 11:57 AM
That B18C1 is worth it though. Trust me on this. I just barely pull on most integras.