another ? about oil press guage and line

[95GSRB18C]

OK, i got the line and the fitting for the oil pressure guage to hook to the back of the block. My question now is, where do i hook it up? The guy down at the place where i got the lines said where i hook it up, should be blocked off right now. I was looking around and right by the oil filter i noticed a quarter sized or bigger flat screw. Do you unscrew that and thread the fitting from the line into that hole? Im kinda lost and i need some help.

Thanks,
Bryan

[95GSRB18C]

anyone?

[TedR719]

There's a rubber cover that covers the sensor and covers the wire. Pull that off and pull the wire connector off. Then just get a deep socket and take it off.

T'n off the block is not the best idea, I've heard alot of them breaking off...

This might help too.


http://home.cinci.rr.com/mistab0ne/Pics2/oilpressurefittings.JPG

[95GSRB18C]

I sorta get that. So how many lines and fittings do i need just to run it to the guage? Does anyone have time to help me hook this guage up after i buy all the right parts?