Oil line fitting

[95GSRB18C]

Anyone know where i can get the oil line that runs from the oil pressure sending unit to my 2 5/8" Oil Pressure guage?

Thanks
Bryan

[b18cya-T]

there's a shop at 60th & lamar in arvada that has oil ilnes & aeromotive fittings in stock. thats where i got my stuff

[95GSRB18C]

thanks for the help.

[95GSRB18C]

oh and BTW: how much it cost you?

[b18cya-T]

i got a
1/8 bspt male to -4an fitting
-4an stainless steel braided line (12 inches)
1/8"bspt female to 1/8" bspt female fitting

a tee with 2 -4an male ends & 1 1/8"bspt end

it was about 30 bucks

[Maverick]

Are you talking about the thin plastic line? Thats what most oil pressure gauges come with. If so they you can buy the line with fittings at Autozone or checker. If you need the "T" to put into your block then get what Obi One told you to get.

[95GSRB18C]

mine never came with any line because i got it from a friend. It is a autometer guage, pro comp series silver face guage. I just need the line that runs from the back of the guage to the oil pressure sending unit and that's it. So it should be just one line and probably a T connector. I am not running turbo so i dont have to worry about the turbo feed line or anything.

[95GSRB18C]

damn...hey titus, i keep forgeting to ask what the name of this place is, sorry.

[b18cya-T]

i actially cant remember, but its just south of 60th ave on lamar st. on the west side, & there's a picture of a buggy on the sign.

[95GSRB18C]

allright. Thanks alot for the help.