1FAST4
01-07-2003, 11:16 AM
For Sale: 1996 Acura Integra GSR $14,900
Less than 20k Hwy miles on the motor
Mods:
· Jackson Racing Supercharger @ 8.5 PSI
· NOS Systems (Single Fogger Wet) 35-60 shot
· Fererra Stainless Steel Valves (1mm larger)
· Dual Valve Springs w/Titanium Retainers
· 3 Angle Valve Job
· Ported and Polished Head
· Skunk2 Adjustable Cam gears
· Type-R Head Gasket
· Type-R rods
· Perfect Circle Rings
· Walbro 255 Litre/Hr Fuel Pump
· RC 310cc Injectors
· MSD Ignition w/BTM Control
· DC Short Ram Intake
· Greddy Header
· Greddy Cat Back Exhaust
· APEXi VAFC
· Clutch Masters Carbon/Kevlar Clutch
· Clutch Masters Light Weight Fly-Wheel
· B&M Short Shifter w/ Bushings
· Momo Sport Leather Shift Knob
· Skunk Adjustable Coil Over Suspension
· KYB 4 Way Adjustable Gas Struts
· Eibach Camber Kits (front and rear)
· Sony CD w/ in Dash Crossover
· Alpine Mids and Highs-Clarion 25x4
· Kenwood Pro 10”s-Earthquake 2150 (700W RMS)
· Dyno’d @ 331.1whp with 60 shot
· Dyno’d @ 300.4 with 40 shot
· Standing ¼ 12.31@117mph (unofficial)
· And probably a few more little things that I forgot to list.
Nearly $20k invested. The car was professionally built by Speed Craft in Jacksonville, FL, which was ranked 4th in the country for import performance by Sport Compact Car and 7th by Super Street. It needs a new bracket from Jackson Racing to tighten down the blower belt and a new FPR for the NOS. If you have any questions, just ask. If you want more pics just ask, serious inquiries only!
Less than 20k Hwy miles on the motor
Mods:
· Jackson Racing Supercharger @ 8.5 PSI
· NOS Systems (Single Fogger Wet) 35-60 shot
· Fererra Stainless Steel Valves (1mm larger)
· Dual Valve Springs w/Titanium Retainers
· 3 Angle Valve Job
· Ported and Polished Head
· Skunk2 Adjustable Cam gears
· Type-R Head Gasket
· Type-R rods
· Perfect Circle Rings
· Walbro 255 Litre/Hr Fuel Pump
· RC 310cc Injectors
· MSD Ignition w/BTM Control
· DC Short Ram Intake
· Greddy Header
· Greddy Cat Back Exhaust
· APEXi VAFC
· Clutch Masters Carbon/Kevlar Clutch
· Clutch Masters Light Weight Fly-Wheel
· B&M Short Shifter w/ Bushings
· Momo Sport Leather Shift Knob
· Skunk Adjustable Coil Over Suspension
· KYB 4 Way Adjustable Gas Struts
· Eibach Camber Kits (front and rear)
· Sony CD w/ in Dash Crossover
· Alpine Mids and Highs-Clarion 25x4
· Kenwood Pro 10”s-Earthquake 2150 (700W RMS)
· Dyno’d @ 331.1whp with 60 shot
· Dyno’d @ 300.4 with 40 shot
· Standing ¼ 12.31@117mph (unofficial)
· And probably a few more little things that I forgot to list.
Nearly $20k invested. The car was professionally built by Speed Craft in Jacksonville, FL, which was ranked 4th in the country for import performance by Sport Compact Car and 7th by Super Street. It needs a new bracket from Jackson Racing to tighten down the blower belt and a new FPR for the NOS. If you have any questions, just ask. If you want more pics just ask, serious inquiries only!