WTB: Integra Front Sway Bar and/or Endlinks

[Weston]

I'm looking for a front sway bar and/or endlinks from a '94-'01 Integra GS-R or Type-R for a reasonable price. I believe '00-'01 LS/GS will work too. I'm talking about the front *sway* bar, not the strut bar.

[HONDA GHANDI]

I have one for a 2000 Si if that can benefit you at all. I thinki can dig up the end links too.

[12seccivy]

Originally posted by HONDA GHANDI
I have one for a 2000 Si if that can benefit you at all. I thinki can dig up the end links too.

yeah i think they are the same.. isn't it 26mm?

[HONDA GHANDI]

23 I think. all I know its too heavy for a drag car. ;)

[12seccivy]

Originally posted by HONDA GHANDI
23 I think. all I know its too heavy for a drag car. ;)

damn dude, i think you should do the v6 turbo project i was hoping to do.. you would be very likely to succeed and mucho fucking fast too.. 'burnout:

[Weston]

Hmm, not sure if the Si will work... I'm looking for something in the 24mm-26mm range that has ball-joint endlinks and will fit on my '97 Integra LS.

[HONDA GHANDI]

alrigt. Ill check the size on it next time I see it in the shed. It hs ball joint ends though. One was smashed in the accident and I replaced it so its new.

[Weston]

I did a little searching around, and it looks like the Si bar is 26mm. But I'm still not sure if it'll fit... How much would you want for it?

[HONDA GHANDI]

Make an offer. And dont worry about offending me. Its a paperweight right now.

[Weston]

Ok, I'm clueless as to how much they usually go for, but how does $60 sound? (assuming it's the 26mm bar and will fit a teg)

[JAPDOMESTIX]

I have a type r one .off the jdm type r,make an offer

[HONDA GHANDI]

Originally posted by Weston
Ok, I'm clueless as to how much they usually go for, but how does $60 sound? (assuming it's the 26mm bar and will fit a teg)


I will get it out of storage and you can try it to see if it fits. Then you can pay whatever you think its worth.

[Weston]

Ok, sounds good... when's a good time to do this? And how do you want to do this? Are you coming to the Longmont meet up on Friday night?

[HONDA GHANDI]

I will be going to my storage this week. But I probably wont be goin on Friday. Is there somebody goin up there that can take it with them?

[Weston]

I think Titus was coming up... not 100% sure though. I could come down and meet you somewhere on Sunday too...

[HONDA GHANDI]

I have the sway bar now. It has one missing end link. I am sure you could order one from the dealer pretty easily though. If you still want it let me know.

[Weston]

Yeah, I'm still interested. I'm sure I could find an endlink for it. Brian (aka forum, I think) said he could bring it up to Longmont on Friday. I could PayPal you or give the money to Brian to bring to you. Or, I could just come down on Sunday or whenever's good for you. Let me know what works for you...

I'm still not sure if it'll fit, but my hunch is that it will.

[forum]

Yeah I was going to try to set up an appointment at honndastuff on friday to have tobi look at my car about my starting problem and I figured that I could get it then but I dont know if that will all work out

[HONDA GHANDI]

That should work fine Brian. And Weston you can just give B the money when he comes up there.

[Weston]

Ok, sounds good.

[Weston]

Well, rats... This might not work. :(

I just found a pic and diagram of the Si bar and it looks like it's curved a bit different from the Integra on the ends. I think I'd have to get GS-R endlinks, but I don't know if that'd make it work because of the way the bars are curved. Looks like the Integra bars come at an angle on the end, where the Si bar is straight.

Here's the pics... What do your mechanical instincts tell you?

Si bar:
http://www.geocities.com/MotorCity/Garage/6282/fswaybar.html

http://www.hondaautomotiveparts.com/catimgs/13S020_B2711.gif


GS-R bar:
http://www.vmac.org/~weston/teg/Misc/2002-12-09/dcp_3111.jpg

http://www.acuraautomotiveparts.net/acura/jsp/mws/catimgs/13ST70_B2710.gif

[HONDA GHANDI]

Si lower arm is not cast iron like yours. it is a two peice stamped and welded arm. Thats what makes the difference. You are more than welcome to try it if you like but it doesnt look good.

[forum]

that doesn't look promising :(

[Weston]

Alright, I guess I'll have to forget about buying the Si bar then. Sorry to flake out on you. :(

[HONDA GHANDI]

You big flaker. ;)

[JAPDOMESTIX]

I STILL GOT MY TYPE R ONE :)

[HONDA GHANDI]

no yelling please.

[JAPDOMESTIX]

My bad,I just get so wxcited about type R's

[Weston]

JAPDOMESTIX: The front sway bar? Anything different from the USDM bar? What's the diameter on it?