PDA

View Full Version : Compression test on a Motor already pulled?

sirtef9
07-21-2008, 02:07 PM
Any ways to do it? I wanna double check a motor I have before I sell it, It was already pulled when I recieved it.
TIA
mx-6er
07-21-2008, 02:42 PM
If it's got the clutch and flywheel and a tranny with a starter still attached to it, yeah. Ground the battery to the trans and hook up the power to the positive. Grab a small wire for the solenoid and jump that from the positive terminal to that little male plug othe starter with your compression gauge in a cyl, wide open and watch the gauge.
sirtef9
07-21-2008, 02:48 PM
If it's got the clutch and flywheel and a tranny with a starter still attached to it, yeah. Ground the battery to the trans and hook up the power to the positive. Grab a small wire for the solenoid and jump that from the positive terminal to that little male plug othe starter with your compression gauge in a cyl, wide open and watch the gauge.
So ground it at the tranny, Put the positive on the positive starter terminal, then run a wire from there to the other ,male end on the starter?
I tried that but not the wire for the solenoid.
Thanks Paul You da Man:biggthump
mx-6er
07-22-2008, 01:07 AM
NFP mang. Glad I could be some help. I tried calling you today or texting you today. I was trying to get a hold of you to see if you still wanted that cluster? Hit me up tomorrow or something.
sirtef9
07-22-2008, 02:44 PM
NFP mang. Glad I could be some help. I tried calling you today or texting you today. I was trying to get a hold of you to see if you still wanted that cluster? Hit me up tomorrow or something.
I do, It does work just fine eh?
Integra <3 work
07-22-2008, 04:04 PM
I do, It does work just fine eh?

i can vouch for that cluster i saw it working perfectly before he pulled it!
sirtef9
07-22-2008, 05:28 PM
i can vouch for that cluster i saw it working perfectly before he pulled it!
I know I don't doubt Paul, just checking because I didnt ask before. Thanks man
mx-6er
07-23-2008, 02:15 AM
Yeah it works fine, I'll probably be down Thursday Ted. Sometime around noon.
sirtef9
07-23-2008, 07:48 AM
Sweet , you should stay for the Pool party for my bday at 7pm;-)
mx-6er
07-24-2008, 12:13 AM
Sweet , you should stay for the Pool party for my bday at 7pm;-)

Damn man I would but I gotta be back up for work at 6:00pm. The hatch will be done soon though so I'll definitely be cruising down there in the near future a few times. We'll get something planned.