PDA

View Full Version : preferred cam...d-series


StaR_ScreeM70
06-23-2008, 12:00 PM
alot of people are running the zex cam on the street...is that too aggressive for a boosted daily driver? i mean i plan to run the car hard on ocassion, but i would also like to be able to go about it calmly from time to time...

riceburner700
06-23-2008, 12:33 PM
we are running a zex on our boosted built d that made 417whp and 323lb and that was daily driven

Martian
06-23-2008, 05:19 PM
Debatable, stock Z6 cams seem to be a great choice for boost. People like the zex, but Ben and I both have pondered on this and think a stock cam may be better for the entire RPM. Zex favors the top of the RPM band.

StaR_ScreeM70
06-27-2008, 11:12 AM
will i be able to rev high with the stock cam...i have new valves and springs...but some say new retainers for the crower stage 2

justin
06-27-2008, 09:31 PM
will i be able to rev high with the stock cam...i have new valves and springs...but some say new retainers for the crower stage 2

New *stock* valves/springs? Or aftermarket? If they're stock you probably don't want to rev much higher then stock rev limit. If they are aftermarket, why didn't you get retainers/keepers too?

Justin

crteg6
06-29-2008, 03:49 AM
go with the ZEX cam love it!

StaR_ScreeM70
07-01-2008, 02:08 PM
i have new valves, springs and retainers/keepers...sorry i spaced that...just lookin for the cam...the zex is good all around...DD and big boost