Autometer Oil Press. guage

[scoobyworx]

I have a autometer silver comp ultra lite series oil pressure guage and im not real sure where to hook it up. Anyone know how to do it or show me where im supposed to hook it up? It's a mechanical guage so i have to run a line into somewhere as opposed to the electrical where you just hook wires up.

Thanks for the help,
Bryan

[b18cya-T]

i think you can run a tee on the block where the oil pressure sensor is (the same place most people use to feed oil to a turbo)

[scoobyworx]

hmm....interesting.....got any pics?

[b18cya-T]

nope.

try http://repo.jackmoves.com justins stuff, integra, turbo install, & the oil feeds. he actually ran a line from the block to a tee, & zip-tied the tee to a nearby hose

[gjcivic]

use teflon and make sure its TIGHT.....

[scoobyworx]

i still dont even know where to hook it up tho.

[b18cya-T]

http://repo.jackmoves.com/view_photo.php?set_albumName=album83&id=oil_feed_002

------------------------------------------------------------------------------------

on this one, the little blue fitting is tapped into the block where the oil pressure switch is

the picture is taken from underneath & behind the engine. you can see where the oil filter screws in.

http://repo.jackmoves.com/view_photo.php?set_albumName=album83&id=oil_feed_006

[scoobyworx]

Thanks. I think i got it now.

[scoobyworx]

Does anyone know where i could pick up the oil line that is going to be running from the back of the block to the guage here in denver somewhere?

Thanks,
Bryan