Martian
02-18-2008, 08:53 PM
My email is Martian197@Comcast.net
Martian's is located at:
5420 Marshall St. Unit F, Arvada (North of 52nd ave, inbetween Wadsworth and Sheridan)
Inside TC Performance
When bringing in items for powder coating, please remove any plastic or rubber parts. If disassembly is needed, it can be arranged with TC's, at their rates. I will not bake any rubber or plastic in my oven as it is a safety hazard.
If its metal, I can coat it so long as it fits in my oven. 4'Hx3'Wx3'D
These are general prices and not final prices. Quotes are given on a customer by customer basis. This is just to give a general idea.
Powder Coating
13-15" OEM non aftermarket supplied 50$ per wheel
13-15"Aftermarket and OEM Aftermarket supplied 70$ per wheel
16-18"OEM non aftermarket supplied 70$ per wheel
16-18"Aftermarket and OEM aftermarket supplied 90$ per wheel
SOHC 4 cyl Valve cover 50$
DOHC 4 cyl Valve cover 60$
6-8 cyl valve covers 50$ per cover
4 cyl Intake manifolds 70$
6-8 cyl Intake manifolds 100$
Charge pipes 20$ per foot up to 2.5" dia.
30$ per foot 2.5"-4" di.
Compressor housings 40$
Brake calipers 40$ per caliper
Ceramic coating (black only):
40$/housing this is for your compressor and exhaust housings on your turbos.
20$Dump tube
40$Down pipes
60$Log style and shorty 3/4 cyl. manifolds,
for 20$ more you can get the interior of the manifold coated as well
70$ram style manifolds
80$drag style equal length manifolds, 3/4 headers
All at once special If you bring in your manifolds for ceramic along with your downpipe and dumptube, the price will be manifold cost+40$
Note: For ram and drag manifolds, and headers sprayable inner surface in the tubes will be coated as
much as possible at no extra charge.
Most blasting is done in house, but for harder to strip Items we use "Roy Sandblasting". Located off of Washington, north of "DenCol steel and fasteners" north of I-70. You are more then welcome to take them your parts personally, 303 669 1750. Just tell them Martian's Powder Coating sent ya.
Powder and ceramic coating will be quoted in person, on a customer basis. These listed prices are not to be intended as a quote for work.
Items that need to be stripped will be more, dependent on size of part. Money saving tip:The less time I spend stripping an item for PC , the cheaper it'll be to coat it.
My stock of colors will increase as demand for it increases. I cannot stock 50 colors at this time, but my selection will increase over time.
Update: If there is a color that you would like that is not currently in my stock. For a 20$ deposit I will order your color choice. The 20$ will then be credited to the coating of your item when the color comes in. If you place the deposit but decide not to have me coat any parts (within 7 days of receiving color), you forfeit the 20$. This is the only way for me to increase my color stock and better serve you at this time. An appointment must be made with me to look over colors from my distributor to ensure you get the one you want.
-High Gloss Black (although this color is pretty as hell, it is very unforgiving to flaws in the metal. It shows everything, this is just an FYI)
-Low Gloss Black
-Gunmetal
-Bronze(Dark, semi-gloss)
-Brass
-Red(bright red)
-Wrinkle Red
-Dark Gray
-Antique Green(turquoise)
-Chrome
-Pink
-Blue
-Lime Green
-Gold
Please note, Items must be paid and picked up within 30 days of job completion. Any item that is not becomes property of Martian's Powder and Ceramic Coatings in accordance with Colorado state law. I appologize, but this is necessary in order to maintain my business. Acceptions for pick up can be made if arranged and agreed upon in advance.
Martian's is located at:
5420 Marshall St. Unit F, Arvada (North of 52nd ave, inbetween Wadsworth and Sheridan)
Inside TC Performance
When bringing in items for powder coating, please remove any plastic or rubber parts. If disassembly is needed, it can be arranged with TC's, at their rates. I will not bake any rubber or plastic in my oven as it is a safety hazard.
If its metal, I can coat it so long as it fits in my oven. 4'Hx3'Wx3'D
These are general prices and not final prices. Quotes are given on a customer by customer basis. This is just to give a general idea.
Powder Coating
13-15" OEM non aftermarket supplied 50$ per wheel
13-15"Aftermarket and OEM Aftermarket supplied 70$ per wheel
16-18"OEM non aftermarket supplied 70$ per wheel
16-18"Aftermarket and OEM aftermarket supplied 90$ per wheel
SOHC 4 cyl Valve cover 50$
DOHC 4 cyl Valve cover 60$
6-8 cyl valve covers 50$ per cover
4 cyl Intake manifolds 70$
6-8 cyl Intake manifolds 100$
Charge pipes 20$ per foot up to 2.5" dia.
30$ per foot 2.5"-4" di.
Compressor housings 40$
Brake calipers 40$ per caliper
Ceramic coating (black only):
40$/housing this is for your compressor and exhaust housings on your turbos.
20$Dump tube
40$Down pipes
60$Log style and shorty 3/4 cyl. manifolds,
for 20$ more you can get the interior of the manifold coated as well
70$ram style manifolds
80$drag style equal length manifolds, 3/4 headers
All at once special If you bring in your manifolds for ceramic along with your downpipe and dumptube, the price will be manifold cost+40$
Note: For ram and drag manifolds, and headers sprayable inner surface in the tubes will be coated as
much as possible at no extra charge.
Most blasting is done in house, but for harder to strip Items we use "Roy Sandblasting". Located off of Washington, north of "DenCol steel and fasteners" north of I-70. You are more then welcome to take them your parts personally, 303 669 1750. Just tell them Martian's Powder Coating sent ya.
Powder and ceramic coating will be quoted in person, on a customer basis. These listed prices are not to be intended as a quote for work.
Items that need to be stripped will be more, dependent on size of part. Money saving tip:The less time I spend stripping an item for PC , the cheaper it'll be to coat it.
My stock of colors will increase as demand for it increases. I cannot stock 50 colors at this time, but my selection will increase over time.
Update: If there is a color that you would like that is not currently in my stock. For a 20$ deposit I will order your color choice. The 20$ will then be credited to the coating of your item when the color comes in. If you place the deposit but decide not to have me coat any parts (within 7 days of receiving color), you forfeit the 20$. This is the only way for me to increase my color stock and better serve you at this time. An appointment must be made with me to look over colors from my distributor to ensure you get the one you want.
-High Gloss Black (although this color is pretty as hell, it is very unforgiving to flaws in the metal. It shows everything, this is just an FYI)
-Low Gloss Black
-Gunmetal
-Bronze(Dark, semi-gloss)
-Brass
-Red(bright red)
-Wrinkle Red
-Dark Gray
-Antique Green(turquoise)
-Chrome
-Pink
-Blue
-Lime Green
-Gold
Please note, Items must be paid and picked up within 30 days of job completion. Any item that is not becomes property of Martian's Powder and Ceramic Coatings in accordance with Colorado state law. I appologize, but this is necessary in order to maintain my business. Acceptions for pick up can be made if arranged and agreed upon in advance.