What stock cams are best for boost...

[dopeem1]

any one know...i have a b16a2 with the stock cams still and im looking for somethng that will spool faster than it does now...

[urhomieblaze]

i hear gsr cams work nicely

[sirtef9]

www.phearable.net (http://www.phearable.net), all specs here, gsr and si same cam.

[honda1982]

ITR cam

[integra_drk]

itr cams or ctr cams. gl finding some.

[Hater]

www.phearable.net (http://www.phearable.net), all specs here, gsr and si same cam.

I've talked to vega and he always suggests CTR and ITR like ^ stated. You can buy the ITR's from Honda. But of course when ever buying from honda expect big $$$.

[ShawDiesel]

ive seen good results from friends cars withgsr cams and better results from itr cams

[ispkarl]

i know it sounds odd but i have seen good power from skunk 2 pro + 1 cams . But only with adj. sprockets and quite a bit of dyno time.

[dsm king]

i here the s2 are hard to tune though, bad idles. either low idle low fuel or high idle lots of fuel. go itr

[servion]

It really depends on the exhaust backpressure (i.e. manifold and turbine setup choice)

[Terry]

Civic HypeR cams

http://cgi.ebay.com/ebaymotors/CIVIC-TYPE-R-CAMSHAFTS-CAMS-JDM-VTEC-CTR-ITR-B18c-B18c5_W0QQitemZ220174107604QQihZ012QQcategoryZ3361 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[zakkshaffer]

i believe gsr cams are

[boostedEG]

i dont think any of them will have a noticeable effect on spool. the only way they could help spool your turbo is if they made more low-end power, which means you'd sacrifice top end power.

FWIW 60-1teg made 686hp on gsr cams.

[Integra Type-R]

I would use ITR or stock gsr cams.

[Luda]

ctr cams

[wameng]

CTR are the way to go