PDA

View Full Version : Quick DSM Question

81RDNK
10-30-2007, 09:04 AM
Since I am new to the whole forced induction world. I am wondering if a 1990 Talon has a factory dual port actuator. The reason I ask, is I need to get a new MBC. And the one I am looking at from Turbonetics says it only works with a external wastegate or a factory dual port actuator. Thx in advance guys.

David
john
10-30-2007, 09:07 AM
No it does not. I'll suggest a hallman MBC - simple, accurate, works every time. I've used hallman MBCs for nearly 10 yrs.
81RDNK
10-30-2007, 02:54 PM
Is there any certain model I should get from hallman?
M@
10-30-2007, 03:35 PM
You just need a standard boost controller. Get their cheapest one and you'll be fine.
john
10-30-2007, 03:44 PM
I use a hallman es. If this is your first DSM, beware of fuel cut. 16 - 17 psi is about what the MAF will let you boost to. Except on cold days. :)
M@
10-30-2007, 04:09 PM
Hehe. 18-20 psi on cold days ftw. I suppose my GM MAF helped that, too. ;)
Evil_SpeedRacer
10-31-2007, 07:16 AM
I wish my DSM wasn't broken :(
john
10-31-2007, 07:25 AM
That's cheating. :) An it turns the 14b into nothing but a heat pump.

Hehe. 18-20 psi on cold days ftw. I suppose my GM MAF helped that, too. ;)
Evil_SpeedRacer
10-31-2007, 07:48 AM
I'm pretty sure he is on the E16G with BPR7ESs. I am getting ready to sell my E16G soon.
Spooled50trim
10-31-2007, 07:48 AM
I wish my DSM wasn't broken :(

I thought you had her running?
Spooled50trim
10-31-2007, 07:49 AM
I'm pretty sure he is on the E16G with BPR7ESs. I am getting ready to sell my E16G soon.

My buddy will jump on this if in good conditon and if you sell
Evil_SpeedRacer
10-31-2007, 07:52 AM
I did, until I broke the front tranny mount to the motor. I just got done putting in a new clutch last week, drove around the block and it broke in the driveway. I have to either weld it on with nickel rod, or swap my parts to the other 6-bolt. If I swap over I'm going to buy a stroker crank. Its such BS, all this money for nothing.

E16G has no shaft play, 2,000 miles since it came out of the box and went on the Laser.
Spooled50trim
10-31-2007, 07:54 AM
money pits, damn 2.3l stroker DO WORK!
Evil_SpeedRacer
10-31-2007, 07:57 AM
Werd. Here is the thread I made after breaking the car:

http://www.highaltitudeimports.com/showthread.php?t=60404