95 ls swap

[xxxd-manxxx]

looking to sell my 1996 civic ex coupe. no motor just rolling shell. comes with gsr fat fives and i will throw in two extra fat five rims with no tires. has a black front bumper. mayco paint job. body is in good condition as is the interior nothin major. has three pillar gauge pod with auto meter boost gauge, glow shift a/f gauge, and oil pressure. brand new exhaust from ebay. its either 2.5 inch or 3 inch i dont remember and i havent looked at the car for a while. Throw me some offers.


http://i130.photobucket.com/albums/p249/96coupe/DSC01739.jpg
http://i130.photobucket.com/albums/p249/96coupe/DSC01740.jpg
http://i130.photobucket.com/albums/p249/96coupe/DSC01743.jpg
http://i130.photobucket.com/albums/p249/96coupe/DSC01739.jpg
http://i130.photobucket.com/albums/p249/96coupe/DSC01746.jpg
http://i130.photobucket.com/albums/p249/96coupe/DSC01738-1.jpg
http://i130.photobucket.com/albums/p249/96coupe/DSC01733-1.jpg
http://i130.photobucket.com/albums/p249/96coupe/DSC01735.jpg

[M@]

All you need is an OBD2 dizzy, alternator, injectors, ECU, and conversion harness... http://www.boomslang.us/obd2to1.htm

You should be able to get all that for fairly cheap. I doubt you'll find anyone wanting to trade you for an OBD2 ls swap.

[xxxd-manxxx]

i already have the obd2 to obd1 ecu conversion harness or do i need the obd1 to obd2 conversion harness?. so i just use my stock obd2 engine harness on the obd1 ls swap and get the needed obd2 parts (ie dizzy, alternator etc)?

[M@]

Right. Or you could just run an OBD2a LS ecu ('96-99 Integra LS), and it will plug right in since your car is OBD2a.

[xxxd-manxxx]

i heard the same thing about using the obd2 harness on the obd1 swap but we tried connecting the harness to the swap and they just dont fit up together!

[M@]

And actually, if I recall correctly, your alty/dizzy plug wont work. You need to find an SI/EX engine harness (if I recall correctly).

[xxxd-manxxx]

my stock harness is a ex. is that not the right one though!

[M@]

Ah, okay.. that should work perfectly then.

[xxxd-manxxx]

clear your inbox :) let me know if you have any parts laying around that i can get from you (obd2 dizzy and alt)

[zakkshaffer]

need your block if the rings and everything are ok...let me know if ur willing to part

[unsivil_audio]

I'll trade you shells? EG hb, with ek front end. It would be a plug n play swap then :P

[xxxd-manxxx]

sorry not lookin to part!

[unsivil_audio]

Bump. Pm'd you back.

[twistedimage]

HOW MUCH FOR SWAP?

[unsivil_audio]

pm'd ya back.

[Nick_S]

I can wire it into your car if you need me to let me know.

[unsivil_audio]

Bump, and pm'd again.

[xxxd-manxxx]

HOW MUCH FOR SWAP?

shoot me a offer over pm!

[unsivil_audio]

back at ya.

[BIG T]

so are you still willing to sale

[chang]

didnt u just get this motor? why dont u just put it in ur car and boost it or do ls/v unless theres something wrong with the motor.

[M@]

He didn't know he only needs an OBD2 dizzy/alty/etc.

[unsivil_audio]

Bump. Pm'd you back.

[Nick_S]

He didn't know he only needs an OBD2 dizzy/alty/etc.
He don't I can wire obd2 plugs on the obd1 wire harness. But I guess he don't want that.

[M@]

You can, but it takes longer than it's worth to just find the OBD2 components, IMO. He's on a budget, too.. so figured his best route was to find the OBD2 parts.

[Nick_S]

You can, but it takes longer than it's worth to just find the OBD2 components, IMO. He's on a budget, too.. so figured his best route was to find the OBD2 parts.
Yeah it could take longer but I am pretty sure I have a obd2 harness and obd1 in the basement. It would be alot cheaper going my route to. Do you mean it will take longer to wire up? Or do you mean take longer to find the parts?

[unsivil_audio]

I just want a 96-00 coupe again. :P Hopefully we can trade.

[xxxd-manxxx]

YA I WANT TO TRADE BADLY. I HOPE THIS GOES THROUGH AND YES I DID JUST GET THIS MOTOR. AND I PLAN ON DOING LS/V!

[xxxd-manxxx]

bump motor is for sale. pm me with a good price and its yours! will throw in a d16y8 block with crank if wanted!

[jdm95integra]

I need just the motor how much? pm me

[xxxd-manxxx]

BUMP!

[Pang]

Hows the block, any stripped threads? Looking for a LS block people.

[xxxd-manxxx]

YA THE DRIVER SIDE MOUNT HAS A COUPLE STRIPPED HOLES THE BOLTS JUST PULLED OUT THE THREADS WHEN ME AND COLBY PULLED OFF THE MOUNT BUT IM JUST GOING TO RE TAP THEM.

[Pang]

Crappy, nevermind. Those holes never hold after a Tap job.

[xxxd-manxxx]

ok ya it sucks but it'll work.

[unsivil_audio]

Helicoil my friends, also, use ALL the mounts including the lower torque mounts; it wont happen again.

[xxxd-manxxx]

i heard that those suck!!

[M@]

Haha, who told you that? Helicoil is one of the best inventions in the world. Almost better than the beer helmet.

[unsivil_audio]

^-I think that was sarcasm. lol.

[xxxd-manxxx]

NO ITS NOT!

[unsivil_audio]

lol, pm'd.

[M@]

^-I think that was sarcasm. lol.

Actually, no.. I was being serious. All of the exhaust manifold holes on my head are helicoiled. One of the best inventions ever.

[unsivil_audio]

No I thought xxxd-manxxx was being sarcastic. lol. I like helicoils, I figure if they can hold headstuds, they can hold about anything. :)

[M@]

Never tried using one for a headstud. Cool, though.

[jdm_vizionz]

Hey, I'll throw you 500 for the EX Shell? If you wanted.

[xxxd-manxxx]

lol no thanks!

[xxxd-manxxx]

bump want this sold

[xxxd-manxxx]

bump motor is down to $800

and i'll start out the shell for $1200 or best offer

[jdm_vizionz]

Hey, are you asian? If you are, Do you know a guy named Barney vang?

[xxxd-manxxx]

nO AND no

[M@]

Damn. It's tempting to pick up the car and motor. Must fight the urge.

[xxxd-manxxx]

750 FOR MOTOR!

[jdm_vizionz]

I'll give you 500 for the motor? Straight up cash.

[twistedimage]

i tried that^^^^^^^^^^^^ long time ago

[xxxd-manxxx]

blew a tranny so im going to need the one from this ls most likely. so the motor is up for sale with out the tranny

[unsivil_audio]

pm'd ya.

[twistedimage]

how much? for just eng

[M@]

I'm willing to bet England isn't for sale.

[integra_drk]

Hey, I'll throw you 500 for the EX Shell? If you wanted.
I'll give you 500 for the motor? Straight up cash.


Do you lowball on every site?

[jdm_vizionz]

Hey, itz only the LS motor. No tranny. Wat do you expect? I'm not gonna pay 600 for the motor and no tranny.

[xxxd-manxxx]

SALE PENDING TO JDM VISION.

[xxxd-manxxx]

still available comes with everything except the tranny $450 or reasonable best offer

[unsivil_audio]

Post it up on Coloradoracing.net I know there are a couple people over there looking for b-series motors.

[xxxd-manxxx]

thanks man

[kevino002]

if you are willing to sell just the block minus the head, I would be interested.

[xxxd-manxxx]

how much!