PDA

View Full Version : Galant VR4 Part out, lots of 1g parts too


TheJackal
08-01-2007, 08:29 PM
Walbro 255 $60 (will sell separate)
780cc injectors $250
450cc injectors $45
Virgin never fired Jack Mcgee (www.jackstransmissions.com) 2.0 Eagle/Weisco 8.5 and .020 over Chevy Orange $1850
Stock head with crappy valves - Offer
Spare front cover - $90
New in box Ferrea Stock sized valves $250
2 gauge battery relocation kit with distribution block. Trunk to starter to dist block. No battery box or battery

terminals. $50

Turbo Kit: $2750 (will sell the exhaust separate but not the turbo or the manifold, will sell the intercooler pipes

and intercooler separate also)
Id like to sell the whole turbo kit as one, if you want a part of it pm me and we can talk
T3 manifold, cast by drag, which the cast was bought from Turbonetics
Turbonetics Deltagate 38mm waste gate
Garrett t3/t4 T04S, .70 cold, .63 5 bolt turbine
Custom legit 3" exhaust with flex section, megan racing muffler V bands to drop it easy (thinking of working on the

car at the track so its easy to take apart. You can drop the muffler off even to race or dyno. 3 pieces total.
Custom legit 2.5" IC piping to inter cooler, The cooler is 28" wide, by 10.5" tall, by 3.5" thick. Comes with custom

bracket to mount perfectly in the hole of the bumper. Extensive cutting of the bumper support or deleting it totally

is needed. 3" from intercooler to throttle body. IAT 3/8" NPT bung is welded on the bottom side of the IC right

before the TB. Comes with the T clamps and the couplers.
Also Comes with turbo oil feed line.

Complete turbo drain fittings, all AN, the garret side has a -10 CNC'd into the flange, you will need a longer piece

of -10 hose, as the hose that i had was about an inch short. The oil pan side has a 1/2" npt I think (dont hold me

to it) with an NPT to -10 fitting.
Radio Delete carbon fiber switch panel with light switches $75
Carbon fiber coin replacement panel $50

Wheels:
17x10 5zigen FN01R-C Titanium Bronze with 255/40/17 tires all brand new never driven $1050
LIST CONSOLIDATED AS OF 8-1-07

TheJackal
08-01-2007, 08:30 PM
Pictures:

http://fuckrmdsm.centralcore.org/partout/

Spooled50trim
08-01-2007, 08:48 PM
hows that muffler sound?? would you part with just the muffler?......also are the seats for sale?

M@
08-01-2007, 09:31 PM
Did you ever decide how much for your IC setup?

TheJackal
08-01-2007, 09:54 PM
hows that muffler sound?? would you part with just the muffler?......also are the seats for sale?


Are you fucking kidding? No I wont.

TheJackal
08-01-2007, 09:54 PM
Did you ever decide how much for your IC setup?

Yea probably right around 900. Text me if you want to talk more about it.

Spooled50trim
08-01-2007, 10:03 PM
Are you fucking kidding? No I wont.

did it sound like i was fucking kidding, i asked you a simple question didnt ask for a complex answer......dee dee dee !:guns:

Dsmboi50
08-02-2007, 01:18 AM
did it sound like i was fucking kidding, i asked you a simple question didnt ask for a complex answer......dee dee dee !:guns:

This is the same douche bag on codsm that was above selling me his fuel setup because i asked if i needed anymore fittings for it man. Straight up moron man.

M@
08-02-2007, 01:23 AM
Yea probably right around 900. Text me if you want to talk more about it.

I'll text you tomorrow, sounds somewhat fair.

TheJackal
08-02-2007, 07:40 AM
Yea sure Ill cut my muffler off my fucking exhaust to sell it to you. Come get it. $900 bucks.

Oh and DSMBoi, Did you learn how to look at pictures this time around?

Evil_SpeedRacer
08-02-2007, 07:54 AM
Yikes. I was gonna ask about a couple of things but NVM

TheJackal
08-02-2007, 08:04 AM
Oh and actually DSM boi, you just wanted my fuel pressure regulator setup. Not the whole fuel system. If your going to tell a story, at least include all the right parts.