installing A/F gauge? Need diagram "FAZE"

[B16A]

need a wiring diagram on how to install this air fuel gauge its a faze gauge so if anyone has a good link for this please post up thanks.

[honda1982]

If it's a Narrow-band (Suckie) then you just have 3 wires to hook up. 1. power 2. ground 3. A/F wire on the ECU.

[B16A]

If it's a Narrow-band (Suckie) then you just have 3 wires to hook up. 1. power 2. ground 3. A/F wire on the ECU.

yes it is i know :( got a good deal on it though so i wanna try it. yes i have 3 main wires

BLK wire
RED Wire
Green Wire

and then there is two thin wires with like a relay or somethin on them im guessing lights?

well there:

red
red with black stripe?

[honda1982]

I have an autometer A/F and wire like the bottom, similar to my apexi-turbo timer. test out the 2 smaller wire and see if the light goes on the gauge. the O2 wire on the ECU is white. check bellow.
http://www.apexi-usa.com/pdfInstallation/5.pdf

[B16A]

wow that link is confusing lol.... anyways all i need too know are where my red and red with black stripe wires go :/

[honda1982]

I'm not really sure... My autometer gauge have 3 wires, 1. Red 2. Black 3. Purple (O2). I think you should hook those 2 little wire up to a 12V power source and see if anything light up. Maybe there's 2 power and 2 ground wires. one for the gauge light and the other for the needle or A/F light thinging.

[sirtef9]

, put the green wire to the white o2 wire, the other is power and ground

[B16A]

but what about the little box thing that has a solid red wire going from it and a red with blk stripe?

[sirtef9]

box thing? take a pic of it

[B16A]

its a seperate plug on the gauge itself! has two wires i think its like a relay or something to do with lights.

[sirtef9]

o ya its prolly the light for it, just ground the black and power the other

[B16A]

cool gracias sir.

[sirtef9]

anytime