stock t25 boost

[NoWheels]

how much boost does this run stock

[ReggieRay]

I had one on my 4g63 and it could spike to 19psi. But overall it did 15psi till about 5.7ish k and then it fell to 10psi :frown:. So i'd say 10 psi but there so small they flow little air. You can do better. But they do spool in an instant.

[sbiggi]

They run 10psi stock

[ReggieRay]

Maybe it was 5k, i cant remember but it sucked.

[ReggieRay]

there turned to run 14.5 psi or something but they cant hold it. so 10psi is a fair call.

[john]

I believe a stock 2g runs 14 - 14.5 psi.

[NoWheels]

well im useing one on my d series so with the internal wastegate it would be at 10 psi becase i heard it was like 7-8 psi

[ryanman]

On the car that they most commonly come on, 95-99 DSM's, they run 10psi stock.

[Martian]

Stock spring arm is 7psi.

[Dsmboi50]

Stock spring arm is 7psi.

on the ones that came on the 2g dsms no its not.. its 10-11psi

[NoWheels]

oh dam is there a way i can tee off the boost so that i get like 7-8 psi

[boostedEG]

i believe martian is correct. specially since he has one on his car.

i'm not too sure about about the T25's from a 2G, but i know the the 1G's had something else on the car similar to a boost solenoid that would cause the car to make 10lbs, but the wastegate actuator was set at 7-8.

i did 2 d-series with 14B's, and both made about 7-8 psi untill you bent the wastegate actuator rod.

[boostedEG]

either way a d-series can take 10 psi from a T25 with no problems as long as you have the proper engine managment.

[unknown_sleeper]

either way a d-series can take 10 psi from a T25 with no problems as long as you have the proper engine managment.


:werd: