need some side jobs

[riceburner700]

I do porting/polishing cylinder heads. looking for some spare money to start my build. I have some pictures of a cylinder head i have done. if you have a spare head you want done i can do it pretty cheap. pm if you are interested. your head will be cleaned, similar to hot tanked, head checked for straightness on a head surfacer. intake and exhaust surfaces cleaned. then re cleaned after work so everything is nice and pretty. i can have valve jobs done for an extra fee.

http://img237.imageshack.us/img237/5865/95412160pm0.jpg

http://img139.imageshack.us/img139/2545/50070557ye6.jpg

http://img139.imageshack.us/img139/4040/combustionchamberdx0.jpg

http://img263.imageshack.us/img263/9199/finishedintakegp4.jpg

http://img186.imageshack.us/img186/4921/finishedportsxu7.jpg

http://img133.imageshack.us/img133/8193/porting3pz6.jpg

http://img341.imageshack.us/img341/8866/29660182vb9.jpg

some of the pictures were taken with a camera phone, so thats why some pictures are shitty quality. the rest were taken with a digital camera. this was a d16y8 head that i did, i have done turbo manifolds and intake manifold. i can do just porting or porting/polishing to a mirror shine as well. if your still interested i do it for a very cheap reasonable price

[Slava]

Do you only do heads or do you do any port and polish? Intake manifolds?

[riceburner700]

what would you want done to the intake manifold? like a port match? or fully port the runners up to the throttlebody?

[Slava]

I'll need it port matched to the TB.

[riceburner700]

what intake manifold and what size throttle body are you going to use? it can be done

[riceburner700]

anybody? i can port almost anything you want ported

[Minotaur]

PM sent.

[9-GSR-6]

how much to get the intake done

[riceburner700]

depends on what you are looking to do with it? like a throttle port match to the throttle body? or port matching the runners to match the head?

[riceburner700]

bump

[saN]

PM'd...

[ReggieRay]

Work comp it messing up i cant pm you. try pm'ing me and i should be able to reply.

[riceburner700]

pm'd

[riceburner700]

everybody that has seen me a pm has been pm'd back

[ntgtyper]

bump

[meat-market]

do you flowbench the heads you port & polish to show actual gains?

[riceburner700]

i can but thats gonna cost more

[Spooled50trim]

I have a o2 housing if you want to port that bad boy out

[riceburner700]

pm'd

[riceburner700]

i will be down in north of Denver this weekend if anybody is wanting there work done i can pick it up. usual turn around for smaller things besides cylinder heads is about 1-2 days, that includes dsm 02 housings, manifold porting-intake and exhaust. throttle body matching. cylinder heads are at the moment about 5-7 day turn around depending on what you want done.

[riceburner700]

i have lowered my prices just to get some business started. Somebody has to come through

[riceburner700]

heres my old hf manifold that i ported out to flow a little more for "nowheels"

http://img54.imageshack.us/img54/35/hfmanifold2kd6.jpg

http://img54.imageshack.us/img54/4985/hfmanifold1xt4.jpg

[riceburner700]

monday morning ttt

[NoWheels]

bump the hf manifold looks great!

[riceburner700]

thanks man

[erick garcia]

how much more is it to flow bench the head for power gains?

[riceburner700]

pm'd

[riceburner700]

heres a b16a cylinder head that i am currently doing a fully cylinder head service for ntgtyper

http://img217.imageshack.us/img217/9595/b16a1ntgtypermg7.jpg

http://img201.imageshack.us/img201/538/b16antgtyperoo7.jpg

may 8th:
http://img337.imageshack.us/img337/9578/b16a3ntgtyperng2.jpg

http://img337.imageshack.us/img337/5514/b16a4ntgtyperww5.jpg

may 12th:
http://img151.imageshack.us/img151/6969/b16antgtyper5ln8.jpg

http://img295.imageshack.us/img295/5273/b16a6ntgtyperoj0.jpg

http://img147.imageshack.us/img147/7039/b16a7ntgtypercz8.jpg

http://img295.imageshack.us/img295/9484/b16a78ntgtyperbf9.jpg

[riceburner700]

updated

[riceburner700]

Friday bump!

[riceburner700]

saturday bump

[pgard81]

hey i have a Question?? call me me when u have time asap 307-214-2089 Paolo

[riceburner700]

if you have any questions on what you want done feel free to call up to 11pm.

(970)690-8443

thanks dustin

[ntgtyper]

up up up to the top for a friday morning

[riceburner700]

hey i am about 50% done with the exhaust ports my air compressor took a sh*t on me so i am fixing that. sorry for the delay.

[riceburner700]

http://img440.imageshack.us/img440/4716/b16antgtyper8dp5.jpg

http://img516.imageshack.us/img516/2568/b16antgtyper9fm3.jpg

http://img516.imageshack.us/img516/1206/b16a1ntgtyper10yx1.jpg

[riceburner700]

bump, got some good deals

[riceburner700]

Friday bump with some pics

http://img519.imageshack.us/img519/7375/img0646ak6.jpg
http://img171.imageshack.us/img171/5076/img0647hz5.jpg
http://img171.imageshack.us/img171/5572/img0648lz6.jpg
http://img186.imageshack.us/img186/641/img0649ta8.jpg
http://img105.imageshack.us/img105/8291/img0650nu4.jpg
http://img364.imageshack.us/img364/3392/img0652kz1.jpg

[riceburner700]

tuesday night bump

[saN]

how much to rebuild head with gaskets (OEM Parts)?

[riceburner700]

what kind of head? like b-d-h-k? I think it was a b18 non vtec?

[saN]

pm'D

[riceburner700]

thursday morning bump

[riceburner700]

stock half of an sti manifold
http://img126.imageshack.us/img126/5889/img0721qs1.jpg

ported below
http://img341.imageshack.us/img341/4867/img0720lo1.jpg


i believe this manifold is for 303 rice boy

[riceburner700]

lets get a bump

[skinyas23]

good seller and great work... time for a bump

[riceburner700]

why thank you ryan

[riceburner700]

finished b16a finaly!!
http://img258.imageshack.us/my.php?image=img0726ly4.jpg

http://img258.imageshack.us/my.php?image=img0727xb9.jpg

http://img245.imageshack.us/my.php?image=img0729xd9.jpg

http://img177.imageshack.us/my.php?image=img0728ff1.jpg

[riceburner700]

monday bump

[riceburner700]

bump, some good deals

[riceburner700]

good old #50, good deal 25% off

[riceburner700]

TTT has been a while