B20 vtec project under way

[AFAsucks]

hey well its time again to start up another honda project. the motor is already on the way. im shopping around for a head right now...just waiting out some prices. alreayd have the sandwich plate for oil and the head gasket but i need to know what wiring harness to use. this is going in an EK. what wiring harness do i need to go get because the motor is not coming with it. now i know i need to pin the wires for vtec and knock sensor but is there anything else i need to do? what ECU do i use? what axles will work? and can i use an Si shift linkage?

now this is going to end up being turbo but the only questions i have is on the swap.
and btw....can i get any of these things i need from you? :) thanks for the help.
Derrick

[HONDA GHANDI]

I have B16 heads here already rebuilt and available immediatly. THe sammich plate I dont stock but I can get fairly easily. Was there a motor that came out of the EK? Sometimes that harness can be modified to fit. IF not you would need a 99-00 Si harness, an adaper harness to run an OBD-I ECU and some sort of management. All of this I have in stock so anytime youre ready we can get you going.

[AFAsucks]

ok well just let me know what the price for the B16 head is. if its in our range ill come up this weekend and give you the money for it. we will also go ahead and buy that 99-00 si harness and the adapter harness to run the OBD-I ecu. and actually we are also going to need an S100 with boost. if you have an ecu we can use we will get that from ya too.
so basically i need the engine harness, sub harness, obd-I ecu (chipped for the s100 w/boost with a map that will get the car to run good enough to drive it up to you to tune) and possibly the head depending on the price.
i can come give you money for all of that this weekend if you will be available on Sat. i know thats your tuning day but its all i got free. let me know if thats cool.
now since im going to be sending you our block to be built you can just hold on to all that stuff until the block comes back. i was going to ask if you could go ahead and assemble the block to the head when the block gets back since you will have the head already anyways. i can drop off our arp head studs and the golden eagle sammich plate. anything we forget to give you, we will buy from ya if you just let us know.

i will assemble the rest and put the motor in and then i'll drive it up to you to tune just for all motor. we will need already have the 750 cc injectors in even when we are just on the motor so we will definitely need the tune. the turbo stuff will take about another month, and we'll be coming back to you for that tune too.

i will definitely be calling you but i just wanted to give you a heads up so you know how much we are going to be coming to you on this one. so pm me some prices on the internals and block guard for the B20, machine shop bill for the build, B16 head, harness, sub harness, ecu, s100, and assembly of block and head.
thanks Tobi, and sorry that was so long and repetitive. trying to cover everything.

Derrick