CRx with Ls integra Da seats

[J.Dub]

How much mods or will they bolt right in?? I helping a friend out.

[mx-6er]

I think that if you are putting them into a 90-91 crx si they will directly bolt in, there is a good chance that they don't though. If they don't you will need to remove three bolts to seperate the back from the seat and then pull the upholstery back on the seats to pull the seat pans out and put the ones that line up in the crx on the da seats.

[J.Dub]

Alright, Thanks man.

[mx-6er]

Double check though cause I'm not 100% positive, I know honda-tech has several threads about seat pan swapping and I'm sure there is one in there for your application.

[meat-market]

they dont bolt up

[HondaPower]

Last time i tried this, my head was hitting the roof.

[Nick_S]

Last time i tried this, my head was hitting the roof.
Did you change the seat pans? even if you don't your head won't hit unless you are like 6 3"

[HondaPower]

I'm 6 and was touching, after changing pan I got 1" clearance and still sitting real high.

[Nick_S]

thats weird I have gsr seats in my crx didn't change the pan and im 6'. I have at least 4" to 5" of head room.

[HondaPower]

Damn, well I don't know then. I didn't have nowhere near that much head room. Maybe i'm special.

[J.Dub]

So white crx they bolt right in? or do we need to change the seat pan?

[Nick_S]

So white crx they bolt right in? or do we need to change the seat pan?

No they don't bolt right in, I had to make brackets.

[J.Dub]

Oh ok. How hard is it to swtich the seat pans?

[mx-6er]

Seat pans aren't that bad at all. All you do is unscrew the three bolts that hold the back of the seat to the bottom of it. then once you have the bottom seperated start pulling out those little c clips out with needle nose or some kind of pliars, peel back the cloth, leather, etc and seperate the metal pan.

[J.Dub]

We got it to fit by hammering a few things and bolting it into place.

[apm1337]

does anyone know for a fact that crx and da seat pans are interchangable? i surfed around and people say that the crx folding stuff doesn't line up at all with the da seat

[royalworks]

Just do it man. The best way to find out for sure is by doing it. Someone has to find out for sure. Might as well be you.