hsunchen
03-04-2007, 02:05 PM
I had this stuff installed in my MR2 for a while, but it was only hooked up for a short time - probably less than 3 months. It's like new, except there is a little oil on the Blaster SS coil and some white paint overspray on the 6A box (barely noticeable - see pics).
It's very easy to install this ignition system - just a 12+ power, ground, two wires to the coil, the coil wire to the distributor (NOT INCLUDED) and a trigger wire.
6A ignition box = part # 6200
Blaster SS coil = part # 8207
Tach adapter = part # 8210
The #8910 tach adapter needed to run this stuff in a Toyota (and some other modern fuel-injected cars) is included and wired up. You'll get all the packaging and documentation as shown in the pics below - what you see is what you'll get.
The MSD 6A ignition box by itself is over $180; the coil over $40, and the tach adapter is about $30 ($250 total).
EDIT: SOLD! 3/1/07 I'd like to sell it all together, but if there's interest for everything separately, I'll consider breaking it up.
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSD6ABlasterSS8910tachadapter.jpg
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSD6AandBlasterSScoil.jpg
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSD6ABlasterSS8910tachadapter2.jpg
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSDdocumentation.jpg
How I had this equipment installed in my MR2...
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSDinMR22.jpg
It's very easy to install this ignition system - just a 12+ power, ground, two wires to the coil, the coil wire to the distributor (NOT INCLUDED) and a trigger wire.
6A ignition box = part # 6200
Blaster SS coil = part # 8207
Tach adapter = part # 8210
The #8910 tach adapter needed to run this stuff in a Toyota (and some other modern fuel-injected cars) is included and wired up. You'll get all the packaging and documentation as shown in the pics below - what you see is what you'll get.
The MSD 6A ignition box by itself is over $180; the coil over $40, and the tach adapter is about $30 ($250 total).
EDIT: SOLD! 3/1/07 I'd like to sell it all together, but if there's interest for everything separately, I'll consider breaking it up.
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSD6ABlasterSS8910tachadapter.jpg
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSD6AandBlasterSScoil.jpg
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSD6ABlasterSS8910tachadapter2.jpg
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSDdocumentation.jpg
How I had this equipment installed in my MR2...
http://img.photobucket.com/albums/v228/hsunchen/Parts%20and%20Stuff%20for%20sale/MSDinMR22.jpg