PDA

View Full Version : custom turbo setup in progress.

Pirate
02-18-2007, 09:00 PM
whats up guys. I'm new to HAI but just want to let you know my 06 tc is in the process of a custom turbo setup.

I can't post in the wanted ad's yet so if you have any slightly used or new parts let me know. thanks.
M@
02-18-2007, 09:14 PM
Howdy Royceizzle. Welcome to the site. Need any help with your turbo setup, let me know.
Pirate
02-22-2007, 09:05 PM
yes I need help but only in green paper. :cry:

unless you have parts your not using.
M@
02-22-2007, 09:21 PM
I do, but I'm about to be using them again. ;)
Pirate
02-25-2007, 04:11 PM
well that aint much help.

do you know were a good place to pre bent stainless tube for a manifold at a good price. that would be a huge help.
kio
02-25-2007, 06:48 PM
ask PANG!
Special Ed GT
02-25-2007, 10:32 PM
do you know were a good place to pre bent stainless tube for a manifold at a good price. that would be a huge help.


In-house mandrel bender here; we can make any bends you need, up to 3" stainless tube:

http://www.hanksvillehotrods.com/gui/content.asp?w=pages&r=187&pid=208

Hank
john
02-26-2007, 06:25 AM
I helped a pal of mine install a full turbonetics kit on his tc. 8psi was around 275 whp, 12psi made 308 with some ignition issues. Fun car. :)

What do you mean by "yes I need help but only in green paper." ?
rey_boricua
02-26-2007, 06:42 AM
I helped a pal of mine install a full turbonetics kit on his tc. 8psi was around 275 whp, 12psi made 308 with some ignition issues. Fun car. :)

What do you mean by "yes I need help but only in green paper." ?

dollar bills!!!!
Pirate
02-26-2007, 06:15 PM
ask PANG!

a good friend of mine buys his stuff from pang and tells me that he won't disclose that info. probably doesn't want someone running him out of business.
Pirate
02-26-2007, 11:04 PM
In-house mandrel bender here; we can make any bends you need, up to 3" stainless tube:

http://www.hanksvillehotrods.com/gui/content.asp?w=pages&r=187&pid=208

Hank

do you do stainless t304 .065wall in a one ince diamater? you site says 1.65 is the smallest you got. and you not using gaurd rail stainless are you?
Special Ed GT
02-27-2007, 10:16 PM
We have tooling for 1" and we bend .120" wall often, but I've never tried 1"x.065" before. If you have a sample you can bring over, we can give it a try. BTW what are you using the thin-wall 1" SS for?

I'm not sure what guard rail stainless is. We bend T304 or 409 depending on the application and on what the customer wants.

Hank
Pirate
03-01-2007, 09:40 AM
We have tooling for 1" and we bend .120" wall often, but I've never tried 1"x.065" before. If you have a sample you can bring over, we can give it a try. BTW what are you using the thin-wall 1" SS for?

I'm not sure what guard rail stainless is. We bend T304 or 409 depending on the application and on what the customer wants.

Hank
I'd much rather have .120 wall. you site only lists .065.

I plan on fabin up my own turbo manifold and down pipe, so 2.5 inch for the DP.

I was wondering about handrail fittings, made from cheap stainless, alot of guys buy them cause thier cheap but it's poor quality, you bend your own stainless so that was a dumb question.