Who can press pins into pistons/connecting rods?

[Mahonroy]

I have 4 pistons that I needed to get the pins pressed into to connect the piston to the connecting rod. Is there any place local that can do it for a good price? I live off of 100th and wadsworth btw. What am I looking to spend to get that done? Thanks!
-Matt

[Slow96GSR]

Try Napa or TCs Performance, Tobi.

[riceburner700]

any machine shop should be able to do it

[Mahonroy]

I'm going to give TC Performance a call tomorrow thanks!

Whats some specific machine shops though?

[riceburner700]

were you located, just call around

[M@]

Spitfire Engine and Machine is pretty much one of the best you cann go to if you don't go to TC's.

[myshtern]

Any automotive machine shop

[chrisbarnett01]

I did mine by hand.

[Mahonroy]

I called TC and they refered me to gunn automotive, so I had them do it. cost me 25 bucks, I hope they did a good job and have everything centered like its supposed to be lol

[Slow96GSR]

Pins are the easiest thing to do. We made centering machines outta old parts. All you have to do is heat up the rod, slide the pin thru and bam... yer done! $25 is a good deal.

[M@]

I called TC and they refered me to gunn automotive, so I had them do it. cost me 25 bucks, I hope they did a good job and have everything centered like its supposed to be lol

I'll vouch for Gunn, they did some of my machining and do great work as well.