1-28-07 TC's Dyno day results...

[HONDA GHANDI]

I would like to personally thank all that participated and all that came just to spectate. The event was a sucess and lots of fun. Despite the pending doom of the weatherman, the sky was clear and sunny. A little cold in the AM but a nice day overall. And a special thanks to Martian for sticking around all day and helping to make things go smoothly.

Here are the results of the day, pics and vids up later today or tomorrow.

1. Tony / Honda Civic Si / 578whp
2. Justin / Nissan 350Z / 369whp
3. Jonathan / Mazda RX-7 / 368whp
4. Chris / Nissan 240SX / 261whp
5. Jesse / Honda Civic / 241whp
6. Justin / Ford Mustang / 212whp
7. Daniel / Acura Integra / 210whp
8. Dave / BMW M3 / 208whp
9. Chris / Honda S2000 / 201whp
10. Mateo / 07 VW Jetta / 198whp
11. Wade / Dodge Shelby / 182whp
12. Josh / Honda Civic / 178whp
13. Rudy / Honda Civic Si / 165whp
14. Spence / Honda Accord / 145whp
15. Jeff / Jeep Cherokee / 141whp
16. Jared / Ford Probe / 121whp
17. Chris / Mazda Miata / 120whp
18. Duey / Honda Accord / 109whp
19. John / Nissan 240SX / 103whp
20. Brian / Honda CRX / 92whp
21. Martin / Honda Civic / 90whp
22. Jon / Honda Fit / 83whp
23. Andre / Honda Civic / 82whp
24. Gavin / Mazda RX7 / 81 whp
25. Nate / Honda Civic / 79whp
26. Chris / 85 Honda Accord / 64whp


http://www.dynojunkies.com/forum/album_pic,pic_id,190.html
http://www.dynojunkies.com/forum/album_pic,pic_id,189.html
http://www.dynojunkies.com/forum/album_pic,pic_id,188.html
http://www.dynojunkies.com/forum/album_pic,pic_id,187.html
http://www.dynojunkies.com/forum/album_pic,pic_id,186.html
http://www.dynojunkies.com/forum/album_pic,pic_id,185.html
http://www.dynojunkies.com/forum/album_pic,pic_id,184.html
http://www.dynojunkies.com/forum/album_pic,pic_id,183.html
http://www.dynojunkies.com/forum/album_pic,pic_id,182.html
http://www.dynojunkies.com/forum/album_pic,pic_id,181.html

[rey_boricua]

wish i could of made it, looks like you guys had alot of fun...

[Dave_L]

Lots of fun! I need mo powah!

[HONDA GHANDI]

who doesnt? lol.

[M@]

Booo! I would have only been 4th highest. I need injectors and Hondata. Tobi, make it happen.

[Conrad]

lol jeep cherokee beat half the ricers!

[Slava]

I wish I could have made it but my neighborhood owned wheels.

[myshtern]

What mods does the M3 have and whats mods does the S2000 have?

[doogie06]

Wish I could have been there earlier, still good to see everyone. Thanks for hosting guys.

[velocity]

my s2000 only has spoon style kevlar snorkel, k&n filter & invidia exhaust with silencer in

[Dave_L]

M3 has CAI, exhaust and maybe a chip. I say maybe bc there is a sticker where you plug the programmer in that says it has been reprogrammed, but I dont know for sure.

[Jackrabbit]

Should've listed by torque... that way I could've moved up a couple places. :) :D

[HONDA GHANDI]

Booo! I would have only been 4th highest. I need injectors and Hondata. Tobi, make it happen.

You already know how to make it happen. $$$

[M@]

BOOOOO 2 U!

[myshtern]

M3 has CAI, exhaust and maybe a chip. I say maybe bc there is a sticker where you plug the programmer in that says it has been reprogrammed, but I dont know for sure.

Whats wrong with your car?
You only made a few more hp with 2 more cylinders.

[Deltron_3030]

damn im glad i wasnt the last one on the list

[velocity]

i got vtaaak duh

[-=[Juztin]=-]

my numbers were uncorrected :-P Corrected #'s were 435/434 whp/tq with my dyno stopping short at 6200rpm. Overall pretty much the same as the last dyno, although I need more cowbell!

[velocity]

to bad "i knew it felt slower" :rofl:

[-=[Juztin]=-]

^hey now! :rofl:

[Dave_L]

Hey Chris, what was your torque?

[Dave_L]

Whats wrong with your car?
You only made a few more hp with 2 more cylinders.

Its a '99. They only came with 240 hp stock so nothing is wrong with my car.

[Skaterkid]

Whats wrong with your car?
You only made a few more hp with 2 more cylinders.
I'm hoping this is a joke?

[chris_venturini]

Hey Chris, what was your torque?
me chris? 250lbs

[velocity]

Hey Chris, what was your torque?
Don't remember off hand it was weak sauce tho. sure yours was alot higher than mine. I'll look when I get home tonight.

[Dave_L]

me chris? 250lbs

Not yours n00b! :)

[doogie06]

I think those are pretty good numbers Dave, nothing is wrong.

[chris_venturini]

i know, i just wanted to whore it up some more

[Weston-work]

I think those are pretty good numbers Dave, nothing is wrong.

:werd:

Assuming 15% - 20% drivetrain loss, his numbers are higher than stock.

[Weston-work]

i know, i just wanted to whore it up some more

Did you post your "POS KA-turbo" results on codrift yet? :D

[Dave_L]

i know, i just wanted to whore it up some more

What a slut.

[HONDA GHANDI]

And a couple more....

http://www.dynojunkies.com/forum/album_pic,pic_id,180.html
http://www.dynojunkies.com/forum/album_pic,pic_id,179.html

[BlkThunder]

are these corrected or uncorrected?

[Weston-work]

are these corrected or uncorrected?

It seems to be a mix of both.

[BlkThunder]

cool... just kinda curious what the general concensus is because i always use corrected numbers and other people dont seem to be down with that. i figured in the area we'd use the corrected numbers just eo be on par with everyone else.

[smithz]

Tobi, I think the difference in the before and after must have been corrected vs. uncorrected. Is there any way to tell from the printout what it is showing?

I have a feeling the printout I had from last time was corrected, but the numbers you did this time were uncorrected, which is why my previous curve was like almost 30hp short of what showed on the new printout. But I'm just guessing at this point...

[young geezer]

Booo! I would have only been 4th highest. I need injectors and Hondata. Tobi, make it happen.

how much horse power did your car pull because if i was there i would also be the 4th on the list.

[HONDA GHANDI]

It says on the top or your printout Correction: SAE or NONE. This will tell you. Most of the prints were corrected with the SAE method, I had one guy in the middle of the day who wanted uncorrected numbers and I forgot to go back in and reset the computer after so a few slipped in there that were uncorrected numbers.

[chrisbarnett01]

Yes, mine in that list are uncorrected.

The corrected #'s for the Miata are 144 hp and 145 ft lbs.

[Brandon]

:rofl: @ corndog

[smithz]

It says on the top or your printout Correction: SAE or NONE. This will tell you. Most of the prints were corrected with the SAE method, I had one guy in the middle of the day who wanted uncorrected numbers and I forgot to go back in and reset the computer after so a few slipped in there that were uncorrected numbers.

Justin thanks that guy for his multiple heart attacks...

[velocity]

Hey Chris, what was your torque?
just looked dave 201.2/133.9

[Conrad]

:rofl: @ corndog

dont be sad little fella that the "toy" cant do that without sliding sideways...

[Dave_L]

just looked dave 201.2/133.9

Damn 4 cylinders! ;)

[velocity]

8,900 rpms 240 hp stock i'm not complaining lol :worshippy

[venge_x]

I can't wait for the video, I don't think it will do justice on how loud my car is!
<img src="http://excoboard.com/forums/13532/user/104483/214412.jpg">

[KennyKen]

Really wish I could have made it...had other plans but it looked like a nice turn out ;) .

[smithz]

I was looking forward to meeting more of the HAI ancients... :D

[STIBungy]

That's veterans, you noob!

I was looking forward to meeting more of the HAI ancients... :D

[smithz]

Ancients sounds so much more Anne Ricey

And yes, Ricey was an accident. :rofl:

[STIBungy]

YOU are an accident! :D J/K

Ancients sounds so much more Anne Ricey

And yes, Ricey was an accident. :rofl:

[smithz]

It's true... :(

[TEGGY-1234-]

need to have another one soon. Just wondering since ive never been down there. can you go get your car dynoed at any time?

[Martian]

www.tcperf.com (http://www.tcperf.com)

[ryanman]

need to have another one soon. Just wondering since ive never been down there. can you go get your car dynoed at any time?

Uh yeah, they are a normal business with normal business hours.

[MrsGhandi]

We probably won't be having another dyno day until the spring.

Teggy - yes you can come down & get your car dynoed. A baseline is 2 runs for $40. If you want to do your own tuning & rent the dyno for an hour, it's $80. If you want Tobi to tune, it $150/hr. Give us a call (720) 974-0888 if you'd like to schedule an appointment.

Barb

[TEGGY-1234-]

okay cool thanks. wasn't sure but i will give you a call

[B18B-SC]

just to curious to see if anyone knows. how much higher/lower does a dyno pack read compared to a dyno dynamics dyno? or a dynojet

[TEGGY-1234-]

was that integra stock ls gsr or what anyone know

[EVORSTroy]

was a DA teggy, I would imagine it was a turbo LS motor

[TEGGY-1234-]

okay just wondering. thxs

[chrisbarnett01]

just to curious to see if anyone knows. how much higher/lower does a dyno pack read compared to a dyno dynamics dyno? or a dynojet


I dunno, but for reference I hit 144 correct whp with my Miata, and sport compact car got 151 our of theirs when they tested it at sea level.

Altitude and 18k miles on the spark plugs could be the reason for the 7 hp difference, so I think his dyno is pretty accurate.

[smithz]

BTW Tobi, I looked at the printout and it was corrected last time, uncorrected this time. What was the correction factor that day... I know one of you had it.

[B18B-SC]

I dunno, but for reference I hit 144 correct whp with my Miata, and sport compact car got 151 our of theirs when they tested it at sea level.

Altitude and 18k miles on the spark plugs could be the reason for the 7 hp difference, so I think his dyno is pretty accurate.

altitude should have no effect if using corrected numbers if im not mistaken

[chrisbarnett01]

A turbo will work differently at altitude, so yes it makes a difference.

Of course every turbo is different, which is why correction factors are retarded.

[-=[Juztin]=-]

19% cf

[MirageZ31]

I can't wait for the video, I don't think it will do justice on how loud my car is!
<img src="http://excoboard.com/forums/13532/user/104483/214412.jpg">

I wish I would of been there for this :cry:

[Chris_V=|work|=]

vids?

[chrisbarnett01]

more pics & vids? I saw like 20 cameras and 5 or 6 camcorders.

[Martian]

Working on the vid. I have a lot of footage to get through so please be patient.

[-=[Juztin]=-]

Working on the vid. I have a lot of footage to get through so please be patient.DAMNIT HURRY UP!!!!!! :D :D

[MirageZ31]

=-;678504']DAMNIT HURRY UP!!!!!! :D :D

+1! :D jk

[Martian]

people with pictures see my thread in off topic and post them up please.