**Another 400+ D-series ;)**

[perlmeistere8]

Well finally after about almost a year, the power is finally where I wanted it. Car pulls like a motherf*****, cant wait to get to the track come spring time.

Here is the setup:

Block:
Benson Sleeved D16Y8 9:0 Compression
CP Pistons
Eagle Rods
ACL Bearings
Micropolished Crank

Head:
D16Y8 Head
Ported and Polished
Isky Valvesprings/Retainers
Zex 105300 Cam
Hondata Intake Manifold Gasket
Edelbrock Performer X Intake Manifold w/ port matched TB (60mm)

Transmission:
D16Y8 Transmission
OBX LSD
Action 2MS 6-puck clutch
ACT Streetlite Flywheel
OEM Axles/tranny fluid
L-Con traction Bar

Turbo Setup:
GT30r .60a/r intake, .63 a/r exhaust
Precision 1000cc Injectors
AFI Ramhorn Manifold, 3” DP
Tial 38MM Wastegate w/ 18 PSI Spring
JRC 8” IC
2.5” Intercooler piping
3” exhaust turbo back

And the dyno sheet ;)

http://www.dynojunkies.com/forum/album_pic,pic_id,169.html

Dyno looks drawn on due to last pull being in yellow, which was impossible to see. Thanks again to Tobi, Mike, and Barb at TC's, and to Josh for hanging out for most of the afternoon ;)

Going for mid 11's come spring time. =) =)

Ben

[Mario]

Your image isn't working, but sounds like a badass build!

[perlmeistere8]

Your image isn't working, but sounds like a badass build!

Works now for me at least ;)

[Mario]

No sir. :(

[perlmeistere8]

there ya go

[Mario]

Yay!!! LOL. Looks great man, looks like a hella fun car to drive after 5,000rpms. :)

[95GSRB18C]

nice numbers. thanks for lettin me and my buddy nick watch, it was pretty sweet :)

[perlmeistere8]

nice numbers. thanks for lettin me and my buddy nick watch, it was pretty sweet :)

Thanks Mario and 95GSRB18C, no prob...Too bad you werent there for this run ;)

[STIBungy]

Congrats. I have the same turbo for my car. :D

[Mario]

Congrats. I have the same turbo for my car. :D

Are YOU making 400+?! :spit:

[STIBungy]

We'll see once I'm done.

Are YOU making 400+?! :spit:

[Kwando]

sweet numbers out of a D series...

[HondaPower]

Very nice.

[rey_boricua]

nice numbers

[97CivicNick]

Saw this yesterday, Very nice man! and thanks for lettin us hang out.

[blue]

NICE!!!

[cybergreencivic]

Very nice setup. Engine bay looks imaculate. Wish i couldve stuck around to see it get dyno'd but i was to busy being broke down once i left.

[EVORSTroy]

that's fantastic buddy, congrats. can't wait to see that car in person

[perlmeistere8]

Thanks for all the positive comments :)

[David]

I remember you from turbod16 - very impressive setup, looks like its come a long way.

Interesting to see you went with an OBX lsd, how is that working for you? Did you modify it in any way before you put it into the transmission?

[Martian]

Bens car was being bitchy. It didn't want to make power at all for a bit. Tobi finally regapped the plugs down to nothing and it made this pull. What an awsome sight it was when that display hit 460. Congrats again buddy.

[nicklk]

Good job man! Cleanest 4 door Civic I've seen!

[perlmeistere8]

I remember you from turbod16 - very impressive setup, looks like its come a long way.

Interesting to see you went with an OBX lsd, how is that working for you? Did you modify it in any way before you put it into the transmission?

OBX is working perfectly, I highly recommend one.

Bens car was being bitchy. It didn't want to make power at all for a bit. Tobi finally regapped the plugs down to nothing and it made this pull. What an awsome sight it was when that display hit 460. Congrats again buddy.

Thanks Josh, and thanks for your help :)

Good job man! Cleanest 4 door Civic I've seen!

:)

[riceburner700]

what kind of wheel spin do you have lets say from a dig? what gears do you spin and what ones do you grip in? im building something similar and am very curious

[myshtern]

This was on 18 psi?

I bet that turbo on an STi would be awesome right about 3500rpm.

D-series ftw

[perlmeistere8]

what kind of wheel spin do you have lets say from a dig? what gears do you spin and what ones do you grip in? im building something similar and am very curious

Havent had a chance to completely rip on it yet, waiting for it to warm up a bit and a few other things.

This was on 18 psi?

I bet that turbo on an STi would be awesome right about 3500rpm.

D-series ftw

30 psi :eek:

[young geezer]

nice number. how about some pics of the engine bay?

[riceburner700]

agree;wor; ;wor;

[M@]

Congrats, man. Good to hear. :)

You're running an OBX LSD? Wow... any issues with it (yet)?

[Dave_L]

Nice #'s!

[perlmeistere8]

Congrats, man. Good to hear. :)

You're running an OBX LSD? Wow... any issues with it (yet)?

No issues with it, works like a charm ;)

[MrsGhandi]

I never needed to see the dyno sheet....I just saw Ben grinning from ear to ear!

Hmmm....I think I saw that same face with a certain 350Z owner too ;)

Thanks for choosing TC's...looking forward to seeing it at the track!

[HONDA GHANDI]

I got a couple of under hood pics, you want me to load them perlmiestter?

[servion]

Congratulations, I'm glad you got it where you want it!

[perlmeistere8]

yeah sure tobi ;)

Thanks Jeremy :)

[perlmeistere8]

I never needed to see the dyno sheet....I just saw Ben grinning from ear to ear!

Hmmm....I think I saw that same face with a certain 350Z owner too ;)

Thanks for choosing TC's...looking forward to seeing it at the track!

You guys make that happen, thank you :)

[HONDA GHANDI]

Here ya go.
http://www.dynojunkies.com/forum/album_pic,pic_id,170.html

[cybergreencivic]

i was wondering when the money shot was coming. Man that thing is sooooo beautiful.

[Conrad]

i think martian is going to have a wet dream seeing that.

[Mario]

Here ya go.
http://www.dynojunkies.com/forum/album_pic,pic_id,170.html

The way an engine bay should be. Simple, clean, and fast as hell. :drink:

[perlmeistere8]

Thanks Tobi and thanks for all the comments all. I worked very hard to get this where I want it and I am very very pleased what this D has become...

[velocity]

Looks good wish we would have came back to see the dyno but we were taking advantage of the decent weather to cruise.

[Martian]

i think martian is going to have a wet dream seeing that.
I've had wet dreams about that engine for about a year now bud. Its t3h Hottness.

[HONDA GHANDI]

Thanks Tobi and thanks for all the comments all. I worked very hard to get this where I want it and I am very very pleased what this D has become...

We are glad to have been part of the project.

[servion]

Tobi, what sort of ramp rate/run duration did you use for that final pull?

[HONDA GHANDI]

6 second run duration, 1500-7200rpm ramp rate.