PDA

View Full Version : Boosting

inigo
11-29-2006, 02:27 PM
Hey Tobi, after much research, Turbocharging is the only serious option for gaining power at this altitude without breaking bank for NA. That said, i work quite often and would only have 2 days max time to install my treadstone kit. It would work out much better to simply have it installed. Having a garage myself....id still prefer to have you guys install and schedual a tune in as well. If you could, can you pm me some labor charge's for the install ? The kit is complete minus injectors ( 8-10 pounds would be a safe bet without upgrading the stock fuel system ) ....and of course the tune. Hondata s200 on a p28, the engine is a F22b1 ( sohc vtec ). Let me know what works best for you, i have a couple different tunning solutions, let me know what works best for you and i can bring her by. I may have time to only upgrade the Fuel pump before any installation.....hopefully that will hold over, the stock injectors should handle 8-10 pounds daily and so should the motor. Its been leak down tested and compression tested.....all is good and the F has iron sleeves compression = 8:5:1 :) let me the good news. Thanks Tobi.
Martian
11-29-2006, 03:34 PM
you're going to need new injectors. Using the stockers is pushing it quite a bit
95GSRB18C
11-29-2006, 05:20 PM
yea the stockers are only good for like 3-4lbs max if that.
S15SiLVia
11-30-2006, 06:07 AM
get injectors, you'll thank us later.
inigo
11-30-2006, 12:55 PM
well, i suppose better safe than sorry. I orderd a bosch fuel pump but the part is taking longer than expected to arrive. Anyone have a 1st gen DSM who doesnt need his injectors ? :) ( blue tops pref ):killtard:
95GSRB18C
11-30-2006, 04:33 PM
theres a couple people who have em. and by F22B1 i assume you have a 94-97 Accord EX? If so, you should already have a resistor box which makes it alot easier.
inigo
11-30-2006, 05:38 PM
theres a couple people who have em. and by F22B1 i assume you have a 94-97 Accord EX? If so, you should already have a resistor box which makes it alot easier.

f22b1 in a race prepped Cl. I do have the resistor box as well. :) Tobi has recommended some realy realy good options to help me meet my goal, hopefully we can get this project documented so i can post the build for everyone.
HONDA GHANDI
12-01-2006, 09:13 AM
We always document our build with photos so that wont be an issue. :D