My obd2-obd0 questions

[mx-6er]

Alright so I am going to put a d16y7 in my ef, I was offered the harness and ecu which I wanted to use both. I know the easy way to do this is to use my distributor, injectors, rail, etc etc off of my ef, but I want to get as far away from all of my old engine components from the d15 as possible since its the dx and requires the dpfi-mpfi swap, and I know that the interior plugs will not fit into the obd2 ecu. So my questions is can I use the obd2 ecu and obd2 ecu plugs and just transfer all of the pins out of the obd0 plugs and into the obd2? If so do have any diagrams or know of where I can find any diagrams so that I can do this? Thanks for the help.

[HONDA GHANDI]

I dont know why you would want to. It would take several hours of wiring and hassle. www.rywire.com is your friend.
99% of the time on these swaps we do plug and play harnesses through rywire. They are clean, professional looking and will drop right in and work like it was from the factory. I suggest a OBD-I conversion however.

[mx-6er]

Thanks Ghandi, I found some help for the swap, and I can't believe I didn't think of the obd-1 idea either. Thanks for the ideas and the link.

[HONDA GHANDI]

Cool. Glad I could help.