PDA

View Full Version : FS: B-Series RevHard Turbo Manifold

Weston
10-10-2006, 10:58 PM
I am selling a used genuine Rev Hard cast-iron turbo manifold for B-series Hondas and Acuras. I'm letting this go for cheap because there is a crack around the #4 runner, where it meets the #3 runner. It still works and I had patched it up a bit, but didn't quite get all of it, so it leaked a little. You may have better results if you're willing to put some effort into it.

Edit: It is now on eBay... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300041563665

http://www.TurboLS.net/pics/RevHard%20Top.jpg

http://www.TurboLS.net/pics/RevHard%20Bottom.jpg
rey_boricua
10-11-2006, 09:34 AM
BUMP
HondaPower
10-11-2006, 12:00 PM
How long did this manifold last you until it cracked?
Weston-work
10-11-2006, 12:25 PM
How long did this manifold last you until it cracked?

A year and a half. It cracked while road racing, so the heat, vibration, and stress on it was excessive. Probably would have done better if I had supported the weight of the turbo with a brace to the block or something.
HondaPower
10-11-2006, 01:07 PM
Did it started rusting quickly or what? And what manifold are you going to use?
Weston-work
10-11-2006, 01:35 PM
It was pretty rust free until I vented the hood, but it's still not bad... just light surface rust, and some of the orange stuff in the pic is just copper gasket maker. I replaced it with a knock-off RevHard, which was about 90% the same fit.
boostedEG
10-11-2006, 08:07 PM
does it clear AC?
Weston
10-11-2006, 08:14 PM
does it clear AC?

Yes, it is AC compatible. The only potential issue is the downpipe, but I did have a 2.5" mandrel-bent downpipe that cleared, back when I still had the AC installed... it was close, but it did fit, so it's definately possible.
Weston
10-12-2006, 09:44 PM
Bump
Weston-work
10-13-2006, 12:46 PM
^^^
Weston
10-13-2006, 07:57 PM
Bump
Weston
10-23-2006, 11:14 PM
Bump. It's on eBay... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300041563665
boostedEG
10-24-2006, 12:15 AM
local pick up ok?
Weston
10-24-2006, 12:38 AM
Yeah, local pick up is fine... I'm usually available after 6pm during the week.
Weston-work
10-25-2006, 02:36 PM
bump
dsmkid
10-25-2006, 02:39 PM
im interested, cant get on ebay right now, what is it going for?
Weston-work
10-25-2006, 02:56 PM
$50 starting bid, $125 buy-it-now, ends Oct-30-06 19:55:54 PST.
Weston
10-30-2006, 07:49 PM
Final bump. Ends tonight at 8:55 pm...