o2 sensor question PLEASE HELP!

[RedRiceR]

how do i convert a 1wire o2 sensor to a 4wire sensor??? i did a mini me swap and im using a p08 ecu virtually the same thing as p28. and it said that i need a use a 4wire. so how do i convert it???

[12seccivy]

you need to fabricate the wire harness..meaning find the other half of the connector and run that to the ecu(the other 3 wires)..
Do you have a 95 cx?
If you do then you'll only need to run the wires to the passenger side harness cluster..I think they wired from there to the ecu at the factory

[RedRiceR]

you need to fabricate the wire harness..meaning find the other half of the connector and run that to the ecu(the other 3 wires)..
Do you have a 95 cx?
If you do then you'll only need to run the wires to the passenger side harness cluster..I think they wired from there to the ecu at the factory

where in the ecu do i run it too? which pins?
and yes i do have a 95cx please explain more. thanks

[12seccivy]

well I dont know off the top of my head..
I wont get back to work until thursday..
If I remember when I get back.I'll look it up and see if I can get some pics on here..no promises though.. I dont have a host for pics or anything

PS you dont need to run it to the ecu.. reread my previous post..

[RedRiceR]

Do you have a 95 cx?
If you do then you'll only need to run the wires to the passenger side harness cluster..I think they wired from there to the ecu at the factory
the passenger side harness, is that by the left shoch under the hood?

[12seccivy]

the passenger side harness, is that by the left shoch under the hood?
yes! There are 3 clusters of connectors there..
I'm trying to find my info and see if I can get it up here..