2002 Bandimere Quickest Time List

[exciv2000]

stroker kit on FI is not a good choice for small honda engines

[b18cya-T]

Originally posted by AcuraBro
SLLLLLLLLLLLLLLLOOOOOOOOOOOOOOOOWWWWWWWW

Titus. Screw your 300ZX. Get a turbo kit, or go home. I need some Hondas in the 12's by July.

You too Tobi. Get some Tires and a clutch for that SC'ed car of yours, that CR-V crank pulley, and lets get you in the 12's too. I need all the wepons I can get. Ever consider a stroker kit too? 1600cc is far too small.:p :p :p

yep, the 300xz is screwed...well, not really screwed, but im not gonna buy it. i dont really want to take a loan on a turbo kit tho...

i better get a fuckin good job after i get this degree..grrrr

ok, im gonna stop whoring this thread

[AcuraBro]

Stroker is fine w/ FI. We're not all going for the most reliable set-ups. Either make your car fast or leave it alone, that's my opinion.

[justin]

Originally posted by AcuraBro
SLLLLLLLLLLLLLLLOOOOOOOOOOOOOOOOWWWWWWWW

Titus. Screw your 300ZX. Get a turbo kit, or go home. I need some Hondas in the 12's by July.

You too Tobi. Get some Tires and a clutch for that SC'ed car of yours, that CR-V crank pulley, and lets get you in the 12's too. I need all the wepons I can get. Ever consider a stroker kit too? 1600cc is far too small.:p :p :p

I'll have my GSR turbo'd here in a few weeks. Saved up and bought nice setup, just gotta install it all and get it tuned. I'm not expecting 12's though until I build the motor, haha. 13's though, that is my goal right now :p

Justin

[AcuraBro]

If you want any help putting the kit on, let me know. I'll do everything but weld the oil return line bung into the oil pan.

[HONDA GHANDI]

I have a 1.8 crank already thats been prepped for racing. I need some pistons, rods (7mm shorter) and a block gaurd and Im in. oh yeah, clutch, slicks, injectors, pump, pulley, intercooler.

[AcuraBro]

Hmmmmmm. What pistons you want? I have a selection in my garage. I have 3 forged SRP 11:1 pistons for GS-R, if you could get another one, I could hook you up for cheeeeaap. Also have stock GS-R, Stock B20Z (which won't get you anything). Also have all the rods for those.

[justin]

Originally posted by AcuraBro
If you want any help putting the kit on, let me know. I'll do everything but weld the oil return line bung into the oil pan.

Yea I might need some help with certain things. For the most part I have things under control. I'll need to get my bov flange welded to the charge pipe, oil pan welded w/ return fitting, and IC piping is being fitted and cut by hand too. That stuff I think is what will take the most time. Should be fun tho...

Justin

[AcuraBro]

Oh yeah, believe me, it's fun. Cool, yeah, I'm not an experienced welder, so I can't do any of that welding stuff. Goodluck though.

[HONDA GHANDI]

Those rods wont do me any good, but hte SRP's might come in handy, maybe a little too high on the cr tho.

[AcuraBro]

So do you have to get custom rods tobi? They're GS-R pistons, so in a B16 block and head, I'm damn sure that the dome is less than that of the PR3 pistons. I'd say it's 2-3mm off the deck height of what a flat-top piston is. Only problem is another new piston is like ~$120. I'd say I'd almost give them to you though. It would be wise to get them a new set of rings too. They're also .10mm over I believe. That might also cause a problem.

[phast]

UPDATE the original post already!

[V8SpankR]

This thread is no longer updated,the timeslips page is the only drag list.

[phast]

Oh.. OK! Perhaps taking it down from sticky would be a good idea then. ;)

[KatanaGTI]

I finally ran the VW. 15.980 @ 87.93mph. Not bad for bone stock 150hp. I love VW's!

[toutsuu]

15.027 @ 90.52 MPH

[90EclipseGSX]

12.730@108.70-

[WRX Harvey]

13.501@100.2
Stock exhaust too

[V8SpankR]

Post your new times on the timeslips page,this one is obsolete now. If your time is repeated then Brian will edit them periodically.

[Duece Bigalow]

9.26@139.73-'88 stang TT at only15#'s of boost

[john]

Deuce!

[SC-MECHAM-WS6]

Originally posted by Duece Bigalow
9.26@139.73-'88 stang TT at only15#'s of boost

liar!!! OMG! now this site isnt safe... :D

[n2o powered]

15.6@92mph 2001 jetta vr6

[Duece Bigalow]

Originally posted by SC-MECHAM-WS6
liar!!! OMG! now this site isnt safe... :D


:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:

[Boostnitup]

14.22 at 102 MPH (PMI) '84 Buick Grand National

I'm sandbagging...

[deadly dsm]

Originally posted by V8SpankR
Post your new times on the timeslips page,this one is obsolete now. If your time is repeated then Brian will edit them periodically.

The add timeslips link is messed up and has been for awhile.
Every time I click on the link it gives me some header error bs.

[V8SpankR]

Originally posted by deadly dsm
The add timeslips link is messed up and has been for awhile.
Every time I click on the link it gives me some header error bs.

I think it's under construction for a little while.

[B18a1CRX]

12.80 @ 109 71' mustang fast back with 460 c.i.d.

[B18a1CRX]

12.80 @ 109 71' mustang fast back with 460 c.i.d.

P.S. time slip page doesn't work!

[oracle]

15.211@91.38
this with my engine at 1000 miles new.
Now for sure that time will change

[SleeperZ]

Guess what? This is the 2002 list. Maybe we need to wipe the slate, and start a 2003 list (as soon as the strip opens, that is ;))

[V8SpankR]

New season new list. If you don't run it this year then it's not a valid time.

Is this agreeable?

[Funk1]

14.36@96.11

Funk

[Funk1]

14.36@96.11 (98 talon tsi)

Funk

[V8SpankR]

This list is now void,a new one will be starting up soon tho'.

[BoarderAJAX]

14.47@91 96 TSi AWD

[efini]

1993 RX-7
13.2@108mph

Downpipe, midpipe, catback, intake, PFC

Matt

[V8SpankR]

Like I posted 2 months ago,this is last years list go to the 2003 edition.

[Thrash-it]

14.282 @ 94.15 (71 Chevelle 4/12/03)

(I guess it helps to look at everything b4 posting, eh..)

[Funk1]

14.36 @ 96.11

98 Eagle Talon TSI

[ryanman]

14.36 @ 96.11

98 Eagle Talon TSI
Hey dipshit, we have a 2004 list going.