PDA

View Full Version : CAN ANYONE HELP ME??????


Stevn
04-07-2006, 02:26 PM
her is a link that shows the problems i have been having with my car http://honda-tech.com/zerothread?id=1579904
i have had a couple of friends come over and try to help me and we have had no luck figuring out the problem. i was wondering if there was anybody bored enough to come by my house to take a look at it?
i dont really have any money right now because my other civic blew up on my girl friend a almost two weeks ago, and because of that happening she lost her job and now is working for almost minimum wage.
if there is anyone that is not doing anything this weekend that would help me out i would be willing to buy you dinner and a case of beer cause thats all i can afford.
i would have my car towed somewhere, but there are no good shops that are close to me and it would cost me a fortune just to get it there.
i wish there was something else that i could do but i am stuck when it come to any more ideas.
if some one could help me out it would be greatly appreciated.
Stevn

Zach
04-07-2006, 03:10 PM
will it crank?

Stevn
04-07-2006, 03:53 PM
yes it cranks, and it cranks really good. i checked for fuel and fuel pressure by taking off the fuel rail and turning the car over, i saw the injectors working. i checked my battery, i checked to see if i had spark and i did. i changed cap, rotor, plugs, and wires. i checked all of the grounds, and they looked to all be there and secure. i made sure tha i plugged everything in. i used starter fluid in the throttle boddy when i was turning it over.
after all of that, STILL NOTHING

exciv2000
04-07-2006, 04:15 PM
do you have rods and pistons? Maybe take your valve cover off and make sure you have valves and valve springs?

Varao
04-07-2006, 04:27 PM
I had a simular problem and it was the ETC something to do with it giving out the wrong signal to the ECU and providing enough spark and fuel mixture. To test it before you buy a new one use a 330ohm resistor substituted for the ECT sensor if it starts then that was your problem.

I also know that the Vx wiring is way wierd when I was looking at swaps but that was mainly B16 and B18C.

Varao
04-07-2006, 04:32 PM
Check this out as well it is a good write up:
http://honda-tech.com/zerothread?id=644434

Here is a good wiring diagram:
http://www.hybridgarage.com/tech/5gtech/index.html

Hopefully you can find something in those.

Stevn
04-07-2006, 04:48 PM
those links are for the gsr, not the ls. i dont think that they are the same thing when it comes to wiring cause the first link used a gsr harness and i am using my stock vx harness.