Vtec Controller is in!

[TedR719]

Finally got a my vtec controller in the other day. Now my question is what size injectors are in the sohc vtec motor? (still using orignal injectors with swap)

I ask because usually when vtec kicks in the ecu will dump more fuel thus running pretty rich. Well I know that the autometer a/f meter isn't the best but when vtec kicks in it goes lean durning the change over.

Anyways I should be up for some tuning here soon Tobi so I dont have to guess where to add and take away fuel :)

[2000SiVTEC]

Trust me your fuel is fine dude......

[TedR719]

I know it's fine just wanted to see if I should raise the fuel durning the crossover

[HONDA GHANDI]

all of my fuel maps show a slight enrichening just before the VTEC swithces and then it evens out shortly after. The ECM anticipated the upcoming increase in air in the cylinders and then adjusts using the O2 sensor after the change is complete.
Your stock injectors are more than enough to handle the load.

[Maverick]

Why are you still using stock sohc injectors??????? I thought you had the injectors from the B16..............anyways you don't need to add more fuel to an already rich car.