PDA

View Full Version : Best turbo for d16

sauccarl
03-02-2006, 02:43 AM
What would be the best turbo for me to get for my stock d16z6? I'm thinking of going 6psi.
Martian
03-02-2006, 03:56 AM
It depends on what your looking to get out of it. 6psi is different on a t-25 than it is on a t-3. Do you want boost right away or are you looking for room to grow on you HP numbers. You kind of have to be more specific with what your goal is. I run a t-25 on my y7 and I'm just under 200hp. With this I pretty much have power on demand. It won't set any speed records but it will take a lot of cars off the line, and gives me more power down low but not as much up high.
servion
03-02-2006, 10:50 AM
What would be the best turbo for me to get for my stock d16z6? I'm thinking of going 6psi.

Here's a d16z6 I tuned with a d16z8 greddy kit (in a 92-95 hatch):

The redline is the greddy kit:
http://www.serviontuning.com/images/Tunes/DynoImages/criswell.jpg

I was surprised... that kit actually kicked ass on that car
myshtern
03-02-2006, 12:30 PM
I was really happy with my TD04-13G.
riceburner700
03-04-2006, 03:12 PM
i have a t3 with my d15b8 and it is fully spooled at 4000rpms which isnt bad for a 8 valve... pulls pretty damn hard as well..
transaxion
03-05-2006, 02:08 AM
http://turbod16.com/viewtopic.php?t=23095

thats one of my friends on a d15b untuned. the turbo spools pretty quickly
boosted_b16
03-13-2006, 07:22 PM
Here's a d16z6 I tuned with a d16z8 greddy kit (in a 92-95 hatch):

The redline is the greddy kit:
http://www.serviontuning.com/images/Tunes/DynoImages/criswell.jpg

I was surprised... that kit actually kicked ass on that car

just curious, this was a built motor right? and what turbo was it the 15G? how much boost?
columb0
03-29-2006, 01:43 AM
im runnign a t3 and it rocks right now except for the bad seals...

jeffrey
David
03-29-2006, 02:55 AM
granted, i've never had this one on my car, but if I were to do another setup i'd throw on a gt28r.
servion
03-29-2006, 01:02 PM
just curious, this was a built motor right? and what turbo was it the 15G? how much boost?

Eagle rods, SRP pistons, stock sleeves, stock bore. The red ist he "15t" frmo teh greddy kit and the blue ios a t3/t4 .48 stg 3 hotside with a 57trim comrpessor wheel, .60 ar coldside. I *believe* (if memoer serves me right) it was around 20psi. We actually turned down the boost and made more power; his 2.5"DP, 48 hotside and log manifold are really choking it. He's about ready to retune with a 3" DP, ramhorn manifold and .63 hotside and a zex cam. I'm hoping for 400whp ;)