Exsaust system

[Tonnerre]

I was wondering if I buy a header, high flow cat and a cat back system what will I need to put it on my acura integra. Will I ba able to keep the same gasket or will have to get another and would it be easy to do as long a i cna put it on some jacks.

[ryanman]

Get new gaskets. Put your car on jack STANDS, not just a jack, unless you like broken ribs.

[Tonnerre]

How much are jack stands?

[Nightfall]

1) You don't even own this Integra yet, right?

2) Go to Walmart.com and see how much some jackstands are for yourself.

[ryanman]

Walmart jack stands are like 10 bucks.

[Tonnerre]

I own it in like 2 days. I have to let the check clear.

[M@]

You'd be better off just buying new gaskets.. they shouldn't be too expensive. You can probably get them from TC Performance or any exhaust shop, maybe even from Honda/Acura stealerships.

[Mark_H]

Just disconnect and remove the exhaust from the stock exhaust manifold. Your car will sound SWEEEEEET and loud, and will have ample weight reduction.
M

[Conrad]

1) You don't even own this Integra yet, right?

2) Go to Walmart.com and see how much some jackstands are for yourself.

:werd:

[Tyler]

lol

[oldskoolracer]

usually the exhaust manifold gaskets are fine to use again you just have to check the other ones,,, donut gaskets,lol

[Tonnerre]

I droped off the check today, I am waiting for it to clear.

[Nightfall]

Grats mang. Step one - get a car - done.

Get pics of it up when you can.

[ryanman]

Are you gonna make a trip to Home Depot again for some rain gutters?

[Tonnerre]

Well, I was wondering, Do you guy on the fourm want to see what if we can actual make a custom kit. The car needs paint. I may start a new thread about it if you all want to help.

[HuNgiEbOi]

before you start with the exhaust system I would recommend get some penetrant oil/WD-40 and some muscle, because if that teg still has the same factory exhaust and has never been removed since then. It's going to be a bitch to get off. nomore home depot shit if you really want to make a custom kit do it the right way and make a diagram of how you want it to look, measure for fitment, build the design, make a mold, then good luck with the fiber glass and resign. Good luck

[john]

Custom kit for what - gaskets?

[Tonnerre]

I may want to make a strait back with each exsaust only haveing 2 from the header and just buy to highflow cat.