couple crx questions

[AgressivMX3]

will any D-series exhaust mani fit a D15A3/EW4?

also, it has a broken timing belt, think there's any chance the valves survived?

[Nate]

As far as I know, all non vtec (if not all) D series have the same exhaust ports.

There is a good chance the valves survived. I've done a couple of D series that have been ok. Did one on another that runs rough but I don't know how the valves were before since I bought it with the belt snapped.

I'd say atleast 50/50 if not better. It is always worth a shot.

[AgressivMX3]

great, thanks Nate

[2genCRX]

d-series motors are pretty resiliant, it mostly depends on how fast/rpm you were going when the belt snaped.
also if its a d-series motor yes the exhaust mani will fit its the intake ports that are diffferent on those motors:)

[AgressivMX3]

previous owner said he was doing about 55 when it snapped. So I would guess 2-2.5k. I s'pose I'll go ahead and try just the belt and maybe I'll get lucky.

[2genCRX]

well if you pull the valve cover you may be able to notice damage

[AgressivMX3]

looks ok, gonna try it this weekend. thanks