Body kits, cross car swapes.

[Tonnerre]

I have been looking cor bodykits for less seen cars and The few that they have cost a lot. Here is my idea, I was wondering what kind of stat I should go off the with of the car or what. Here are some figures that I have got on certain cars.
Vehicle Width 66.7 inches Audi 90
Vehicle Width 70.1 inches 97 accord
Vehicle Width 67.9 inches 91 accord
Vehicle Width 68.9 inches 92 bmw 525i
Vehicle Width 64.8 inches 92 bmw 325i
Vehicle Width 69.2 inches 02 bmw 325
Vehicle Width 67.1 inches 96 civic
Vehicle Width 66.9 inches 95 civic 4d
I was wondering if you mounted the body kit how much bigger would I want to buy. Or should I go smaller.
Any one have tried this?

[floored4door]

WHAT?

Please see ur own sig. thanks.

[Tonnerre]

Ok what I mean is I saw a 92+ ledgend with the Ford-SVT Ford truck. He had to do a little modifaction. Will I be able to do it with my Audi?

[HondaPower]

please leave your audi alone thanks

[ryanman]

OMGZ!!1!1

[Tonnerre]

http://www.audi.piwko.pl/pliki/audi_90_tun.jpg
I just do not like how the front is round I like this lip. I do not need a full kit, I just want it to be more like this one. I just want something simple and clean.

[dsm king]

Then save the money instead of tryin to pulla ricer move and butchering your Audi. Theres no better way than the right way.

[honda1982]

butchering Luxery car. Sound like something Jessie Jame would do. good luck messing up that Audi.

[doctorstupid]

I still have no fucking clue what you're asking.

[dsm king]

I still have no fucking clue what you're asking.

Neither do I!

[2genCRX]

he wants to know if he can ghetoTiZE a ford svt f-150 front on his audi?
i'd say go for it !

[Tonnerre]

I have seen good results before. You could not tell that it was the Lighting front. I also was looking at the VR6 lips. They also may be what I am looking for.

[Conrad]

I have been looking cor bodykits for less seen cars and The few that they have cost a lot. Here is my idea, I was wondering what kind of stat I should go off the with of the car or what. Here are some figures that I have got on certain cars.
Vehicle Width 66.7 inches Audi 90
Vehicle Width 70.1 inches 97 accord
Vehicle Width 67.9 inches 91 accord
Vehicle Width 68.9 inches 92 bmw 525i
Vehicle Width 64.8 inches 92 bmw 325i
Vehicle Width 69.2 inches 02 bmw 325
Vehicle Width 67.1 inches 96 civic
Vehicle Width 66.9 inches 95 civic 4d
I was wondering if you mounted the body kit how much bigger would I want to buy. Or should I go smaller.
Any one have tried this?
-

Can this quite possibly be an even more retarded post.... Even when I thought he had the creme de la creme BAM!!!!!! I was wrong!

[Tonnerre]

They are the with of the car. I know they have kits for the car but I just want the front a littel diffrent. It just looks weird like a boat.

[redb20teg]

i say we stop replying to these threads... it might be someone else in here thats just fucking messing with us.

[floored4door]

I have seen good results before. You could not tell that it was the Lighting front. I also was looking at the VR6 lips. They also may be what I am looking for.


hahahhahahahh! Awesome. Who knew that was a ford lightning front end on an audi? WHO KNEW?!?!

[Conrad]

i say we stop replying to these threads... it might be someone else in here thats just fucking messing with us.

I think your right...

They are the with of the car. I know they have kits for the car but I just want the front a littel diffrent. It just looks weird like a boat.

This person clearly isnt smart enough to use a computer.

[Mark_H]

Too much fun...I had to chime in on this beauty...

Yes, simply buy a Ford F-150 complete front end. Then use a hack saw and cut straight across on the portion you want to put on your Audi.(Do you officially even have this so-called Audi??) Then use the same dull hack saw and cut the front end off your perfectly intact car. Take the F-150 front end and secure it to the front of your car with duct tape. If you can't duct it, fuck it.
Have fun, post pics of the result!
M

[dsm king]

Too much fun...I had to chime in on this beauty...

Yes, simply buy a Ford F-150 complete front end. Then use a hack saw and cut straight across on the portion you want to put on your Audi.(Do you officially even have this so-called Audi??) Then use the same dull hack saw and cut the front end off your perfectly intact car. Take the F-150 front end and secure it to the front of your car with duct tape. If you can't duct it, fuck it.
Have fun, post pics of the result!
M

Dont forget the super glue though

[M@]

Holy fucking shit. This guy can't be serious.

[nxbrennan]

Don't forget!!:

Someday I will be someone that ppl go for advice, but not yet.


Soon he will be able to give a walk-through on how to do cross car swapes. The we can swape our bodywork for anything!!!

[M@]

Soon he will be able to give a walk-through on how to do cross car swapes. The we can swape our bodywork for anything!!!
I can't WAIT!

[Tonnerre]

The fucker the messed up my civic has a ledgend that has the lightning bumper on the front, there is a small gap under the each headlight but aside from that it looks goods. It looks like a normal body kit.

[floored4door]

post pics.