greddy evo problem

[velocity]

hey tobi was talking to you about the problem i have with my greddy evo on my sol at your 2nd annual party. i wanted to bring it down this week but didnt get around to it. would you have time to take a look at it sometime this next week? it will probably be late afternoon.

refreasher if you forgot: the piping where the flange connects the resonator to the s pipe sags. i just want to see if there is anything we can do to fix the problem.

hope that makes sense if not here's a pic that may help some
http://atlas.walagata.com/w/liquidtek/me_045_small.JPG

thanks chris

[HONDA GHANDI]

Call on Monday and make an appointment with my Barb. Im sure we have some room in the schedule to get it up on the rack.

[velocity]

thanks again tobi it hasnt scrape once since you fixed it!

[HONDA GHANDI]

Glad to help. Tell your friends. :D

[DC2]

hey tobi was talking to you about the problem i have with my greddy evo on my sol at your 2nd annual party. i wanted to bring it down this week but didnt get around to it. would you have time to take a look at it sometime this next week? it will probably be late afternoon.

refreasher if you forgot: the piping where the flange connects the resonator to the s pipe sags. i just want to see if there is anything we can do to fix the problem.

hope that makes sense if not here's a pic that may help some
http://atlas.walagata.com/w/liquidtek/me_045_small.JPG

thanks chris
You think that's bad? You should see how low my resonator sits to the ground :-O, it's like maybe 2 inchs off the ground.... Don't know why but everywhere I go it scrapes.. Nothing else does though.

[DC2]

http://home.comcast.net/~civic_methodz/low2.jpg
That was right after being lowered, no time for the springs to sink.....

What was the problem and how did tobi fix it?

[STIBungy]

Could be the bolts arent tight where the A and B pipes join.

[HONDA GHANDI]

On the Sol it looks like the installer connected the A pipe to the cat on the floor then put it up in the car and installed it upside down. It will connect to the rear section that way but at an extreme angle. Just poor craftsmanship is all.

[Kwando]

On the Sol it looks like the installer connected the A pipe to the cat on the floor then put it up in the car and installed it upside down. It will connect to the rear section that way but at an extreme angle. Just poor craftsmanship is all.



I wonder who did that????

[DC2]

I took my exhaust to kens muffler.... biggest mistake ever

[velocity]

I wonder who did that????
import sports *cough*

[Kwando]

import sports *cough*



:rofl: I knew you would chime in

[STIBungy]

What a bunch of retards. That's it, I'm taking their license plate cover off my car.