IAT Sensor

[nxbrennan]

So I just recently got a specific B16 MAP sensor, and now my CEL is only blinking one long, for the IAT sensor. I checked my chiltons, and the symptoms it associated with that are definitely there(erratic idling when cold and/or high idling speed), but after searching around on H-T and here I've found very little on this topic, and only a few universal sensors at online stores. Does anybody have any pics of where exactly on the manifold it is? and where locally I could get one?

[HONDA GHANDI]

I can get you one. The location on the car is specific to the year though. They moved it around a bit. Usually they melt during an engine or wiring harness repair. The IAC plug is the same and sometimes can be close enough to mix the plugs up causing IAT failure.
It is a white pr black two pin plug with two screws in it, in the back of the intake manifold or one of the runners. If it is an OBD-II engine it will be in the intake tube leading up to the throttle body.

[nxbrennan]

It's an SiR-II gen, but I don't know the yr. I found what you're talking about though, it's a white plug on the far driver's side runner (#4 cyl?). Do you think I could come down on say tuesday and pick one up?

[HONDA GHANDI]

I would have to order it.