are B18A/B cams the same as B20B?

[B20civic]

thanks in advance :)

[B16crxTurbo]

hmmm, not sure, I would say a micrometer would tell ya though. You should be able to get a set of B18 cams for free if you look around a little.

[B20civic]

Originally posted by B16crxTurbo
hmmm, not sure, I would say a micrometer would tell ya though. You should be able to get a set of B18 cams for free if you look around a little. hmmm. I want to get a set of crower cams, but all they have them for is Ls :( :)

[12seccivy]

i think the cam profile is a little higher on the crv cam(more torque,i assume) i measured them with a dial caliper.. my buddy is using my crv head on his b18a block
cams are bigger and runners are slightly larger

[B20civic]

Originally posted by 12seccivy
i think the cam profile is a little higher on the crv cam(more torque,i assume) i measured them with a dial caliper.. my buddy is using my crv head on his b18a block
cams are bigger and runners are slightly larger damn :( so i guess the cams won't work then

[B16crxTurbo]

Originally posted by B20civic
damn :( so i guess the cams won't work then
Why not send an email to crower and see what they say?

[Brian]

Crower will regrind pretty much any cam you want if you aske them :)

[B20civic]

cool :cool: thanks guys :)

[TedR719]

I've seen alot of crower cams break, good ol regrinds.

[B20civic]

Originally posted by futuresi
I've seen alot of crower cams break, good ol regrinds. hmmm, thats not good :( i thought Crowers were billet?