PDA

View Full Version : Anybody runnning Hondata in colorado?

boostn5Ghaba
03-01-2002, 03:55 PM
I'm thinking about getting a hondata stage 2b for my setup. I was just wondering if anyone here had any experiences with them. thanks
newt2
03-01-2002, 04:08 PM
We have a member in the springs running a 2b. I don't think there's a 4b to tune it with in the state though.
B16crxTurbo
03-01-2002, 04:40 PM
I will be buying a Hondata 4b this season after the build. That has kinda depleted the funds for now. But I hope to have it before the end of the season so I can boost a lot! I don't think I will go over about 12 on the stock ecu, I don't want to risk screwing up the new motor.
Brian
03-01-2002, 05:28 PM
I think Steve is getting a 4b here pretty soon. I plan on a 2b in the coming months...
2000SiVTEC
03-01-2002, 05:33 PM
Yeah I may be buying a 4b pretty soon here......so we will be able to tune them.....
boostn5Ghaba
03-01-2002, 10:32 PM
thanks for replying. I'm going to buy the 2b very soon and I'm hoping someone local could help me tune it.
Brian
03-01-2002, 10:34 PM
Originally posted by boostn5Ghaba
thanks for replying. I'm going to buy the 2b very soon and I'm hoping someone local could help me tune it.

We should be able to help you out. We've already got a few maps for them, so it shouldn't be a problem.... MUCH easier to tune a hondata then an AEM. :drink:
boostn5Ghaba
03-01-2002, 11:15 PM
Originally posted by 99SIVTEC


We should be able to help you out. We've already got a few maps for them, so it shouldn't be a problem.... MUCH easier to tune a hondata then an AEM. :drink:

Would you be able to get the 2b at a competitive price too. I want to support my local shops.:)
Brian
03-01-2002, 11:25 PM
Originally posted by boostn5Ghaba


Would you be able to get the 2b at a competitive price too. I want to support my local shops.:)

We do ahve a pretty good price on them. I'll let you know what I can get you one for. What all do you need?

Wiring harness, ecu, ect?
boostn5Ghaba
03-01-2002, 11:52 PM
My car is obd1. I'm trying to buy the p28 ecu and selling off my p72 so I can raise the money to buy the 2b. Right now I'm looking for the 2b only until I have money to buy the 440 injectors. Thanks for checking on that for me.
Brian
03-01-2002, 11:54 PM
Cool, so you don't need the wiring harness or anything. That will cut the cost a lot. The harness alone is about 150 or 200. I'll get the price for the ecu itself for you then :)
boostn5Ghaba
03-02-2002, 12:04 AM
thanks man. It's nice not having to go to cali to get parts
B16crxTurbo
03-02-2002, 05:16 AM
Could you check on the 4b for my car? I have a PW0 Ecu right now. So it is an OBD, not obd1. Thanks! I think all I need is the ecu, it uses all the factory sensors, right?
2000SiVTEC
03-02-2002, 10:46 AM
Yea it uses all the factory sensors.....
rico_00si
03-02-2002, 11:45 AM
I have a stage 2b in my car. i haven't tried tuning it since i don't have a 4b. right now i'm running a map that the guy i bought it off made. so far so good. there's a lot of maps out there already ad a lot of people have hondata's so you can always find other maps or people to help you with it.
CSMsi311
03-02-2002, 01:06 PM
Are you guys giving up on the AEM?
2000SiVTEC
03-02-2002, 01:45 PM
not really giving up on it. I think I just want at hondata right now, plus I am going to use some of the money I get from it to get my car re-painted
TedR719
03-03-2002, 11:35 AM
I think the Satge 4 Hondata will blow away the other setup I was thining of.

Again any place with a wideband o2 sensor?
2000SiVTEC
03-03-2002, 12:12 PM
a Standalone blows away any of the other pre-programmed ecu's out there hands down. There is no replacement for being able to make adjustments as needed.
justin
03-07-2002, 03:03 PM
Hey all, I'm looking to buy a 2b as well sometime. I am in the process of trying to find a decent priced OBD I p28 though, since I have an OBDII car.

99SIVTEC, you mentioned you can get Hondata ecu's? I'd be interested in what you can get them for, as well as the conversion harness.

BTW, I'm new here, kinda nice to have a board with locals :Beer:

Justin
Brian
03-07-2002, 04:06 PM
Originally posted by justin
Hey all, I'm looking to buy a 2b as well sometime. I am in the process of trying to find a decent priced OBD I p28 though, since I have an OBDII car.

99SIVTEC, you mentioned you can get Hondata ecu's? I'd be interested in what you can get them for, as well as the conversion harness.

BTW, I'm new here, kinda nice to have a board with locals :Beer:

Justin

Welcome to HAI !!!

I'm putting together some pricing for everyone on the hondata's. I think we may be able to get a better deal since 4 or 5 of us are interested....
B16crxTurbo
03-07-2002, 06:21 PM
Will the Hondata run dsm 450's in my car?? I thought maybe I could save some money by getting some of these for cheap. Any one else know if they fit or if I will have issues?
2000SiVTEC
03-07-2002, 07:19 PM
yeah I am pretty sure they will fit. You will just need resistor packs for them......
'00blownSi
03-30-2002, 03:49 PM
What's up HAI! I am new to the boards, but I just installed my 4b into my Vortech Si! All I have to say is this is such a bad ass set up, hands down. I just installed so I haven't dynoed or tune yet, that fun is about to begin. So when I get everything figured out I will let you guys know. Also I was wondering the responce we will be having April 13 at bandimere? I have heard it can be very busy?
V8SpankR
03-30-2002, 09:27 PM
I personally skip the first couple of TTs since they are sooooo crowded and don't want to pay $25 to run only a handful of times.