PDA

View Full Version : FS: Mahle Forged Pistons

TeamWicked
08-26-2005, 03:08 PM
Pistons, SOLD
RiceNmotioN
08-26-2005, 03:20 PM
do u have any rods/Bearings as well? i have a bare block w/crank that i need to build..let me know
B20badboy
08-26-2005, 03:52 PM
specs on the pistons? pics, more info please like what were they used on boost/na etc...
kevino002
08-26-2005, 05:12 PM
man I could use them things!!
TeamWicked
08-26-2005, 09:23 PM
Used on a boosted motor, but hardly 78 miles to be exact. I went to a bigger bore. That is all.
Stroke: 3.433
Rod Length: 5.429
Dome Volume: -8cc
Comp Ratio: 9.0
TeamWicked
08-26-2005, 09:25 PM
Possible some eagle H-beams for 250 shipped serious inquires only.
TeamWicked
08-26-2005, 09:28 PM
Pics are posted???
B20badboy
08-27-2005, 10:32 AM
Right on I just kinda want bigger bore as well.
TeamWicked
08-31-2005, 08:37 PM
bump
RiceNmotioN
08-31-2005, 08:48 PM
so how much for the pistons and rods? includes bearings?
TeamWicked
09-02-2005, 07:47 AM
Bearings? You wouldn't want used bearings, ACL is my recommended choice. $375 for rods and bearings.
TeamWicked
09-06-2005, 08:24 AM
Bump all pm's answered.
oldskoolracer
09-06-2005, 09:03 AM
would those work well with an ls/vtec setup for boost?
TeamWicked
09-07-2005, 07:28 AM
I think so, but before I give you a wrong answer I will find out the correct one. Give me a couple days I'm terribly busy.
TeamWicked
09-09-2005, 06:00 AM
Per Jeff at Mahle Sport Compact division they will work.
TeamWicked
09-13-2005, 07:47 AM
Bump.
BlackDAy
09-14-2005, 04:22 PM
how much boost? size turbo? are u in colorado? i'll give u 100 and pick em up.
TeamWicked
09-16-2005, 06:29 PM
Bump, still no serious buyers...
TeamWicked
09-20-2005, 09:42 PM
Bump
oldskoolracer
09-22-2005, 04:54 PM
How hard would those be to put in an b18 would the rod legnth be an issue
TeamWicked
09-23-2005, 11:56 AM
B18, C, B or A?
oldskoolracer
09-23-2005, 12:04 PM
B
TeamWicked
09-23-2005, 05:14 PM
What I was told it shouldn't be a problem.
TeamWicked
09-24-2005, 07:25 PM
Last bump and price change $100 shipped.
TeamWicked
10-02-2005, 12:21 AM
Bump added rods and price. Thanks Mike
TeamWicked
10-05-2005, 02:41 PM
bump
Philly Blunt
10-05-2005, 09:38 PM
how much for the rods ond piston shipped?are the rod for gsr-type-r
TeamWicked
10-06-2005, 06:59 AM
GSR, If you buy seperate $15 Ground or $25 for 2-3 Day each If you buy both I will ship both for $15 ground or $25 2-3 Day for both. Thanks, Mike
Tyler
10-07-2005, 12:17 PM
I got a 91 Integra RS with a b18a in it could i use these in there?
TeamWicked
10-09-2005, 09:17 PM
I don't believe so, but I would check on Honda-Tech to make sure
TeamWicked
10-13-2005, 01:11 PM
Bump
TeamWicked
10-17-2005, 11:40 AM
Sold.