Bandi on the 17th

[Nick4592]

Anyone going...I shall be there and hopfully in the low 13's :) ...just curious who else will be showing up

[STIBungy]

No 12s eh? When you coming back to Denver? Or are you already back? Not sure I will go.

[Robert_K]

Um... No more track days for me for a while. Good luck to all!!!

[Turbo13]

Little early to say but I will going between now and than. Finally got the car up and running, can't wait to go for 11's!!

[JL LGT]

I might be able to go.

First time at the track....so I don't think I'll run. Just hang back and see how things operate before I dare get my feet wet. Don't wanna look like a complete idiot! Which isn't hard as it is!

What time of the day?

[MirageZ31]

I'm going on the 10th, but if I get any new parts between the 10th & 17th I'll go again.

[Nick4592]

Well...I feel 12's might be hastey....but I am gonna try..I get back from AZ the 11th and hope to get tuned by the time track comes......low 13's are deff....high 12's are hopeful

[transaxion]

I'm gonna try to make it on the 17th as well. I'll be shooting for 13's.

[Nick4592]

Sweet just look for a stock looking silver wrx wagon with a huge exhaust tip...that's me

[mopsi]

I'll be there!!! Finally got all the ignition bugs worked out.. And the Warranted wheels. I cracked all 4 Centerline RPM's on the last event. Can't wait to see what times 500HP will turn.

[Turbo13]

I am now going to try and make it as well. I had ignition problems (we think, will find out this weekend) as well.

[CT9A]

Once again, I will TRY to be there.

[Nick4592]

Sweet big showing...don't a stranger ya'll

[Nick4592]

just put down some really good numbers today...with the new tires and 20psi I think I may just get 12.9 :)

http://www.momentumturbos.com/images/ej5.gif

[Nick4592]

Well Shit....I ran a 13.8 (1st run and only got worse from there) with a broke ass gasket in my exhaust and my broke ass boost controller...turns out the MBC I made is now broke and I was only hitting stock boost (10 in frist, 14 in 2nd and 3rd....and then some how 20 in 4th...) so I have now ordered a new gasket and am going to re-route the my boost lines back to stock to allow the UTEC to control boost...see how that goes next week!!??

[STIBungy]

Hey, what's up Nick? What were the track temps today?

[servion]

For anywone who's interested, I had a decent night...

I'll bost my best 2 (also back-to-back) runs:
60' 1.704
330 4.671
1/8 7.043
MPH 104.86
1000 9.073
1/4 10.788
MPH 132.40

60' 1.767
330 4.733
1/8 7.072
MPH 106.45
1000 9.079
1/4 10.771
MPH 134.36

I'm pretty happy about it... knockin' on 1.6 60's FWD :) I was also hitting intake air temps of 240 degrees!!! My intercooler is definitely not large enough anymore :(

I also had 2 10.8's. I completely destroyed the clutch on my last pass; it was a miracle it drove home (and it limped home... anything over 3k rpms or 10% throttle and the motor would just spin the clutch all they way to redline). I'll post the carnage pics when I jank it out... but they're going to be pretty mean :)

[Nick4592]

Hey, what's up Nick? What were the track temps today?

Temp - 89
Humid - 10
Baro - 23.9

Not too bad of a night to race

[mopsi]

For anywone who's interested, I had a decent night...

I'll bost my best 2 (also back-to-back) runs:
60' 1.704
330 4.671
1/8 7.043
MPH 104.86
1000 9.073
1/4 10.788
MPH 132.40

60' 1.767
330 4.733
1/8 7.072
MPH 106.45
1000 9.079
1/4 10.771
MPH 134.36



Nice numbers!!!! My clutch did the same thing on Sunday. I am glad I took the trailer. Hopefully we can both make it to the Sep 15th race!!

[servion]

Yeah, its time to step into the twin disc... don't know if I'll have the $$$ in time though

[mopsi]

How much $$$ are those twin-disk clutches?

[servion]

For a complete setup, anywhere from $1300 - $1700

[oldskoolracer]

let me know if you need a set of hand serv. i kinda want to see first hand

[MirageZ31]

I was there and ran a 14.087 @ 95.74 MPH