Race season and project Si are on the way!!

[HONDA GHANDI]

Race season is only a few short months away, is everyone ready?
Also I would like to document the life of a race car right here. To start I will post a few pics of the very beginning. Keep checking back to see progress and hopefully winnings! see you all at the track.
step one: purchasing and prepping the car. I bought this car as many of you know as a total from my brother Ben. Ben will be a major shareholder in the teams progress since he basically gave me the car. Props to Ben. Now the car needs to be repaired and prepped for racing. Here are a few pics of the prep work I started today.

[HONDA GHANDI]

Here is a shot of the cracked frame rail. Which will be welded shortly.

[Brian]

We need to get together sometime soon :)

[HONDA GHANDI]

here is the bent frame rail. I will be pulling it straight tomorrow. Check back for pics of the ghetto home made frame puller I made.

[HONDA GHANDI]

Here is the front of the car without a rad support.

[HONDA GHANDI]

How easy would an engine swap be now?

[HONDA GHANDI]

Last but not least, a free set of 17 inch momo's with fucked up tires.

[73Camaro]

Cool! I can't wait to see more on it. It looks totally unwrecked on the photo of the back. Nice rims!

[HONDA GHANDI]

pics of original damage here. (http://www.haiparts.com/vbulletin/showthread.php?s=&threadid=2705)
By next friday i should have the car aligned and ready for paint. If all goes well.
here is my in house crew Mike and Tom

[2000SiVTEC]

Let us know if you wnat or need any help Tobi.....You know we will give ya a hand whenever....

[HONDA GHANDI]

Maybe in a few weeks we can put together a Si weight loss clinic.
Basically a party where we strip the car of everything that makes it slow. And we eat barbecue and get fat.

[DragIIISi]

we have a couple of weight loss ideas for you too. me and Matt are down to help.

[HONDA GHANDI]

for me or the car?;)

[forum]

I hope he meant the car, but if you need it me and ViolatorRH00 can help.. let me know

[HONDA GHANDI]

here is the overview of what I have ahead of me for the next couple of days.

[Kwando]

Looks like a lot of work.

Guess it is going to be a bad time to take my car in for the top latches. You look pretty occupied with the project car.

[HONDA GHANDI]

HAHHAHAHAHHA, bring your car by if its not snowing. I dont get paid to work on race cars, I get paid to make you (my very special warranty customer friend) happy. Oh, by the way, If you get a survey in the mail asking about how your service was, there is a dinner in it if you answer "Completly Satisfied" on every question.;)

[K20A2]

Tobi let me know if you need anything.

[Kwando]

To what restaurant? It depends on which restaurant it is. :rofl:

[Dustin]

Cool Keep us posted on the progress :PIMP:

[TedR719]

Can't wait to see her all done :) So it's going to be up and running by this season right?

[HONDA GHANDI]

Originally posted by futuresi
Can't wait to see her all done :) So it's going to be up and running by this season right?
it will be up and running in a few weeks.

[HONDA GHANDI]

here is the frame before I pulled it today...

[HONDA GHANDI]

Here is the state of the art, top dallar frame alignment equippment I used. All of the big names are using htis procedure.

[HONDA GHANDI]

here is a good shot of the bent lower control arm.

[HONDA GHANDI]

here is a shot after I pulled the frame straight, the places I have prepped for new welds.

[HONDA GHANDI]

here is acomparison shot to give you a better idea of how bent the frame really was.

[HONDA GHANDI]

and finally for today, i bolted up a fender to check my clearances and straightness. Everything is back in shape. Next stage is welding and sealing. After that is suspension and alighnment where we will see how wellI actually fixed everything.

[HONDA GHANDI]

here is a better comparison

[SC-MECHAM-WS6]

I want a set of free rims too.. :(

[HONDA GHANDI]

Originally posted by Kwando
To what restaurant? It depends on which restaurant it is. :rofl:


The restaraunt depends on the survey results.:D
could be McDonalds, or it could be KFC, :rofl:

[Kwando]

Yummy!!!

Looks like you guys didn't have much work to do these few days.

Glad your making that much progress.

[Brian]

Dude, you are the man. I can't believe you already got that much done to that pig...

[73Camaro]

It's looking better and better man! I love your frame straightining thing, very good!

[02GTI1.8t]

looking good. What do you plan to do engine wise for this race season?

[HONDA GHANDI]

Keep your eyes open Monday night for more pics, I am doing the suspenson and welding then. Hopefully if everything goes well I will be putting it on the alignment rack Monday or Tuesday.
As far as performance goes this year i will be leaning towards chassis lightening and not so much engine performance. There is a slight posibility that I may NOS it for the import events jsut for a little kick. Next season i should have a new motor built. Not sure what the motor will be but I am sure it will boost hard.;)

[WinglessTT]

Hell yeah Tobi! Good job! You might want to patent that frame straightener though.

Wish someone would give me a project car.

Does this mean that the Type R won't see anymore track time? :(

[Violator]

I found a place that will get you a Civic Type R tranny for $1000. Although working at honda I'm sure you get a damn good discount.:Beer:

[HONDA GHANDI]

I can gear this trans a little better for about that. Plus next year when I go boost I will need a stronger lsd than the CTR has. I will probably build my own LSD out of Steve's old diff I still have.

[HONDA GHANDI]

If anyone knows anybody selling these parts let me know used is better. Remember, its a race car, pretty isnt necesary.

1. light weight race seat preferrably 2 seats
2. racing seat belt harness (4- point)
3. aftermarket steering wheel and mount hub. (preferable aluminum)
4. manual windows, I am willing to sell the electric windows and wiring harnesses off of the project car.
5. Civic heater duct from a car with no a/c
6. carbon fiber hood


Parts for sale to help fund this project:

1. Entire 96-00 civic A/C system installed and charged by a state certified technician, $900
2. Power window upgrade for 96-00 civic coupe, price negotiable but will include the trade out of your manual window regulators and handles.
3. SRS components, air bags, and module and sensors. Wiring harness. These wont be cheap, but much less than new.$$$


more to come as the parts become available for sale. I will possibly be selling interior to right buyer, probably as a complete package.

[Violator]

I have my power door panels with the regulators, switches, and wiring harness for my 94 civic. I'd be willing to give you my manual windows if you could put in my power windows. I'm not sure if they'll fit your Si. You would know better then me though.

[HONDA GHANDI]

Originally posted by ViolatorRH00
I have my power door panels with the regulators, switches, and wiring harness for my 94 civic. I'd be willing to give you my manual windows if you could put in my power windows. I'm not sure if they'll fit your Si. You would know better then me though.

I remember you saying that you had the power conversion but Im afraid it is different for the 96 -00 cars. bummer

[Mr. NoSkills]

Hey man, I've got your seats and belts in my room right now.
2 jamex daytona's WITH rails that will fit an si. They look exactly like sparco sprints, just straight up race seats. I also have two sets of sparco 3 point belts.
The seats are yellow right now, but my friend can re-do them in another color for you cheap if you want them, the belts are blue.

Also, I'm not sure what you mean by "racecar" but I have a fiberglass hood skin that, with a tiny bit of trimming will fit around the headlights. It was for a 96-98 civic, but you could make it fit. You can have it for free. I don't need it anymore.
But it is just a skin, it weighs like a pound hehe, would use 4 hood pins.

I will let the seats + rails + belts go for $400 OR if maybe you can hook me up with some honda shit I'll be needing we can call it a deal.
shoot me an e-mail if you wanna talk about it more, esell10@hotmail.com

[Violator]

No worries, but if they will fit, I have no need for them after I get my power windows in.

[HONDA GHANDI]

Picked up my color for the job today. will be welding and aligning Monday.

[73Camaro]

No thats a hand that works on cars!!

[HONDA GHANDI]

yeah no kidding. for some reason everything I woked on this week decided I needed a fresh cut. My hands look like I thumb wrestled Edward Scissorhands.

[73Camaro]

Yeah, I know everytime I work on my car I get a new scrape, cut or gash.

[gjcivic]

damn you make it look easy:)

[HONDA GHANDI]

Its not the easiest of repairs but after ten years of this I know my way around a Honda pretty good.

[73Camaro]

Damn! Looking nice, I can tell you have been busy as hell!

[Kwando]

Tobi you make things look so easy!

Just snap your fingers and the car is back together!

Why don't you open your own shop? Just wondering.

Keep up the good work.

[WinglessTT]

Wow! That was quick!

I think that Kwando is right, you should open your own shop.

[HONDA GHANDI]

I would love to open my own shop if any of you guys would be wiling to loan me about $100K. But then I would have to work hard and long and im just not willing to give up my TV time that easy. ;)

[TedR719]

:eek: Damn that was quick!

[Kwando]

TV time is great. But it's much better with :Beer:

[HONDA GHANDI]

Originally posted by Kwando
TV time is great. But it's much better with :Beer:

agreed :Beer:

[HONDA GHANDI]

went to Ingall's Engineering today to see the operations and meet the prez today and pick up some camber arms for the civic. I got to say those guys were really cool and they make a great product for a great price. It is a Colorado company and they always have stuff in stock. If you need any suspension parts especially camber adjusters make sure you remember the name INGALL'S. (nice plug);)
http://www.imagestation.com/picture/sraid28/p93e89aafd9db228d26220b453bea2e13/fdfb756b.jpg.orig.jpg
http://www.imagestation.com/picture/sraid28/pe727cd49c5b43ae924ac2ea87f4e1794/fdfb7567.jpg.orig.jpg
http://www.imagestation.com/picture/sraid28/p1ff22d2bb460277d167fde3f222db812/fdfb755f.jpg.orig.jpg

[DragIIISi]

Hey Toby, just wondering how much you spent on the camber kit. I still got to get rid of my uneven tire wear.

[HONDA GHANDI]

e-mail me or give me a call and I can get you a good price on them. they make rears too.

[B16crxTurbo]

Are referring to Specialty? I thought they made Ingall's in Longmont at Specialty Automotive Products. They do make some nice stuff. They also provide a very nice sponsorship for my brother's shop and their race cars. (PFI)

[HONDA GHANDI]

ingalls is the manufacturer. I buy directly from the factory. im sure specialty automotive buys from them too.

[B16crxTurbo]

Specialty makes all of thier own products. They have a pretty big operation up there in Longmont. They are right off I-25, on Specialty Drive even. Where is the Ingall's factory located? I didn't they were also here in CO.

[HONDA GHANDI]

Ingalls is n Louisville. If specialty sells ingalls they are ingalls parts. If they are labeled specialty they are probably their own.
I put a set of the ingalls front arms on today and they are a really nice peice. It looks like it can take a beating and last a long time.

[Violator]

I havent looked at this forum for a few days, so this maybe alittle late. I dont think I have seen a car put together so quick. I gotta give ya props Tobi. And also if the tranny is in good condition and you dont want it you have a buyer for it. Laterz

[B16crxTurbo]

okay, looks like I learn something new every day. Specialty does make and label their own parts. I didn't know we had 2 very large companies that make suspension parts here in good 'ol colorado. I actually need to buy a front upper camber kit from them, any possibility you could tell me who to get in contact with? The specialty piece is made differently and I prefer the Ingall's. Thanks

[HONDA GHANDI]

You need one for the CRX? i can get anything you want from them because they are now sponsoring the Project Si. Give me a day or so and I can get you prices. what year is teh CRX?

[HONDA GHANDI]

alright folks, got the camber kit installed and adjusted today, re-did the alignment. and got it perfect. now all it needs is a few things here and there and its time for the track.
http://tobi.clubrsx.com/camber1.jpg

[WinglessTT]

Are you gonna paint that fender?

Or are you going to use the primer gray in a ghetto ass riceboy paint and grafix scheme? ;)

[HONDA GHANDI]

Originally posted by MileHighLude
Are you gonna paint that fender?

Or are you going to use the primer gray in a ghetto ass riceboy paint and grafix scheme? ;)



:fu: Yes I will paint it, I have to kinda darker primer, because my colors are a little off. That can wait, I need to get it roadworthy first.

[B16crxTurbo]

The rex is an 88, but it has GSR brakes and 90 civic upper a arms. The camber kit I want is the the replacement upper links, 2 per side. Looks like the attached photo.

[HONDA GHANDI]

Well the weight loss clinic was a success. At about 3 my friend Jeff came over and we started to strip the civic. After about an hour and a half we finished and started to drink and be merry. Had some good grub and good times with friends.

[Kwando]

Tobi, can't see the pics!

I hope we don't have to find another photo hosting web site. Ever since photopoint too a shit, I can't find a good place to host my pics. Not to mention I lost all my pics.

[HONDA GHANDI]

I know, Imagestaion is now jerking me around. if you want to see the pics everyone, here is a link to the album. At least you can go an browse around a little.



<A HREF="http://www.imagestation.com/album/?id=4292119615"><IMG SRC="http://www.imagestation.com/images/album/link/my_album_button.gif" BORDER="0"></A>

[Bedlam]

looking good! Nothing like a tin can with a B16A2 under the hood!

any plans for the engine? that thing would be a rollling terror if you put the jrsc in it.. sucks that all the photo sites are getting lame, wonder if the msn communities area will still let me post images on other sites...

-Bedlam

[73Camaro]

Looking good man!

[HONDA GHANDI]

No plans for the engine this season. Just going to slim down the chassis and tune it for drag racing. Engine work will start after the season is over and winter sets in.

[TedR719]

So you gonna run that instead of the R this year?

Originally posted by FULLTHROTTLE
No plans for the engine this season. Just going to slim down the chassis and tune it for drag racing. Engine work will start after the season is over and winter sets in.

[HONDA GHANDI]

Yeah, i dont think there are enough EBP civic Si's at the track.
Plus id like to kepp the R for a long time and its already showing signs of abuse.:D

[Bedlam]

Originally posted by FULLTHROTTLE
Yeah, i dont think there are enough EBP civic Si's at the track.
Plus id like to kepp the R for a long time and its already showing signs of abuse.:D

maybe I should get mine painted? it would be pretty intimidating to see our entire pit area full of EBP cars :)

-Bedlam

[HONDA GHANDI]

i came home from Korny's today and decided to do a little on the passenger door. I removed teh window regulator, power locks, entire wire harness and all the little clips. i also removed the door check. here is a before pic...

[HONDA GHANDI]

here is an after pic.

[HONDA GHANDI]

and the pile of junk I rmoved, its about 8lbs.

[TedR719]

Nice work, whats the next thing you going to do with "teh Si"? Whats the cars offical name going to be? :)

[HONDA GHANDI]

Havent thought of a name yet, project Si will do for now. Next is the other door. I will install a DX manual regulator so it can still go up and down. other than that the door will be exactly the same as the pass. side.
As far a sperformance, I think I will get a used or cheap intake and build a cold air "box' around it. I also need to install a shift light and Im always on the lookout for more weight savings.

[HONDA GHANDI]

Here are some pics from yesterday. Chris and I pulled the dash and yanked all the extra weight we could off of the dash, firewall insulator, and as many useless brackets and harnesses I could find.

[HONDA GHANDI]

dash in Garage waiting for the saw.

[HONDA GHANDI]

heres Chris putting dash back in, notice the center dash support is gone. I also made a custom plate to put in radio pocket to hold switches and gauges later.

[HONDA GHANDI]

heres the pile of junk that was removed yesterday.

[HONDA GHANDI]

and finally here is the hood locks I installed.

[HONDA GHANDI]

closeup

[73Camaro]

Man, That thing is ganna be bad ass! With all that weight taken off. I would love to see that thing run the 1/4 before I move.

[forum]

Well don't think anyone will want to steal it if they look inside it ever, but its looking really good

[Kwando]

Nice work man! From the pics of the dash are you putting some kind of naviagation system in?

You have too much time! :D

[HONDA GHANDI]

Originally posted by Kwando
Nice work man! From the pics of the dash are you putting some kind of naviagation system in?

You have too much time! :D
No the radio and pocket are gone so i put in a peice of plexigalss to cover the hole and painted it blue to match the car. It will hold switches and stuff later, its just to cover the ugly hole.

[HONDA GHANDI]

ttt. Hey guys, my vinyl came in today so I should be ricing out the Si any day. Keep posted for pics.

[forum]

Originally posted by FULLTHROTTLE
Ingalls is n Louisville.

Where? I live there, think I woulda seen em or something

[HONDA GHANDI]

They are in an unmarked office building out in the sticks. you wouldnt know they were there unless you saw inside the building.

[forum]

Ok that would explain it then kinda hard to know what something is if they dont want you to

[HONDA GHANDI]

their business is basically internet and mail order by catalog only. No need to have an expensive store front.

[Violator]

Where did you get those hood locks and how much where they? That beats the hell outa having locks/pins bouncing around on your hood.

[HONDA GHANDI]

Checker Auto parts. (if you beleive it) they were only $30.

[2000SiVTEC]

Where are the updated pics with the Vinyl? Are you starting to slack on us? :) Where did you get the stuff made up at?

[HONDA GHANDI]

i am slacking. What a loser.

[B20civic]

Originally posted by FULLTHROTTLE
went to Ingall's Engineering today to see the operations and meet the prez today and pick up some camber arms for the civic. I got to say those guys were really cool and they make a great product for a great price. It is a Colorado company and they always have stuff in stock. If you need any suspension parts especially camber adjusters make sure you remember the name INGALL'S. (nice plug);)
http://www.imagestation.com/picture/sraid28/p93e89aafd9db228d26220b453bea2e13/fdfb756b.jpg.orig.jpg
http://www.imagestation.com/picture/sraid28/pe727cd49c5b43ae924ac2ea87f4e1794/fdfb7567.jpg.orig.jpg
http://www.imagestation.com/picture/sraid28/p1ff22d2bb460277d167fde3f222db812/fdfb755f.jpg.orig.jpg is ingall's located in longmont? i know SPC is too :)

[HONDA GHANDI]

Louisville

[HONDA GHANDI]

alright lets see if this works. finally got my picture problem sorted out. Heres a few of the stickers I put on the car, the Intake and shifter courtesy of www.clubrsx.com (thanks Chris)http://tobi.clubrsx.com/banner.jpg
http://tobi.clubrsx.com/intake.jpg
http://tobi.clubrsx.com/shifter.jpg

[HONDA GHANDI]

Plans for this weekend are remove teh exhaust to trade with a tanabe racing medallion. Build a cold air box for the intake and of course lose more weight.

[Bedlam]

lemme know if you need some help..nothing like tearing apart a civic for a good time! At least then when I go to do mine I might have a fucking clue whats going on under there. :)

-Bedlam

[forum]

hell yeah, tearing apart a civic is fun, my passenger door is taken apart right now, trying to install the power door actuators, gettin a new alarm in as soon as i get my tax return and power locks too :)

[BluByU]

I wanna help! Let's throw a mini barbeque, sound like a plan?

[HONDA GHANDI]

Sounds good to me. We had fun last time we did this. It will have to be next weekend though. Im going snowmobiling this weekend. Like the new sig?

[BluByU]

Looks good! I have a whole wardrobe that was baby blue!

[V8SpankR]

Originally posted by BluByU
I have a whole wardrobe that was baby blue!


Whatta you,a pimp?:PIMP:

[BluByU]

Just a ladies man my friend:king: My ex picked out all my clothes because I used to dress her like a stripper.

[HONDA GHANDI]

ttt

[HONDA GHANDI]

I finished the cold air collector I have been working on today. Here are a few pics, please give me your input.
It is made of VERY thin aluminum, and has air forced from the bumper up through the bottom. I havent measured intake temps yet to see if it is working but I will.
http://tobi.clubrsx.com/airbox1.jpg
http://tobi.clubrsx.com/airbox2.jpg
http://tobi.clubrsx.com/airbox3.jpg
http://tobi.clubrsx.com/airbox4.jpg

[HONDA GHANDI]

Kinda looks like that Injen is up to something sneaky in there.:D

[Dustin]

Looks good Tobi!!! lots of Injenuity :D

Hey, you want to come over for steaks and beer sometime???

:Beer:

DM

[HONDA GHANDI]

Hell yes! when? what do I bring? How did you guys like the show the other night?

[BluByU]

Damn that is sweet. I was just trying to dream up something like that for when I get my SC. Oh yeah, I have all the weapons needed for operation no-mo-wheelgap. Is Saturday still good?

[Mr. NoSkills]

dude...
you don't even know how down I am with that box.
looks like the project is moving along well =)

[HONDA GHANDI]

Thanks, want one?

[Dustin]

Hey Tobi,

WHenever u crazy kids want to come over for dinner and spirits.

Friday, Sat, Easter, Hell it dont matter to Cory or I...Maybe I could break out the practice tree and we could have a tourney....That would be a first

DM

[HONDA GHANDI]

Originally posted by Dustin
Hey Tobi,

WHenever u crazy kids want to come over for dinner and spirits.

Friday, Sat, Easter, Hell it dont matter to Cory or I...Maybe I could break out the practice tree and we could have a tourney....That would be a first

DM



Sweet. Hows about we come over on saturday night? what shall I bring?

[HONDA GHANDI]

Ok well I dont have pictures to prove this but the car passed tech today and it weighed in at 2220 lbs. There are a few more things I need to get rid of to hit my goal of 2000 lb +/- 25lbs.

Stock Exhaust manifold
sunroof and sunroof frame (45lbs!)
swaybars
cast Iron lower control arms
fuel tank and evaporative emissions controls (will need to switch to OBD-I for that one)
Would like to make a tubular front and rear suspension. But dont have the time or money to do so this year.
anybody have any bright ideas on eliminating hte sunroof and filling hte hole without it looking all ghetto? Eli?

[B16crxTurbo]

The only thing I think you could do is have it replaced with some plexi. Maybe you could mount it from the bottom some how in a way that it would still look good from the outside? Sounds like you lost about 300+ lbs from the car!! Wow!!

[Violator]

do you have any of the parts left that you took out of the civic? If you dont need some I'll take them off your hands.

[HONDA GHANDI]

i have all of the parts but they are for sale. :D

By the way it ran a 16.022 today.

[Violator]

nice, what parts are for sale?

[exciv2000]

I think, not sure, but think the drum brakes on the EX are lighter than the disc brakes on the SI. Wanna do a swap?! Seeing as this is a drag car (or are you track racing it too?) I don't see the need for overly impressive stopping power.

[HONDA GHANDI]

I will need some stopping power when I am trying to get it stopped from 120mph next season.

[thebearchild]

Tobi,

I have been checking your progress, you do nice work. Did you say you live right by my shop?

Actually, I found you because I might have a proposition for you?
Maybe we can help each other???

If your up right now, reply to this post or send me email, would like to talk to you. .

Bear Lynch
Dyno-Pro

[B16crxTurbo]

Bear, welcome to the site! I would have to assume that Brent R. told you about it? I was talking to him last night about your new site and the business it has been bringing you, congrats!
Dan W.

[thebearchild]

Hey Dan, whats up!, long time no see. . .

Ya, I am really impressed w/what Brent R. did for me w/the website. I really have to thank Brent L. at PFI for hooking me up with him. BTW how is everything going w/PFI-Powerhouse? So far so good. . . ? That was a really wise decision grabbing up Actions-dyno, Northern Colorado has needed one for a long time. Maybe we can do some joint promotional type things together sometime? Plus this may have been the boost that Brent L. really needed to compete for the national championship.

Dan, I might need to talk you out of some help sometime. . .Brent R. tells me you could help me set up my new software so I can print a .BMP file/logo on my graphs? Says you have already figured it out, I dont even know what a .bmp file is?

Send Brent L. my regards, I have mucho respect for him, and would still like to help his race-car any way that I can. Nice to see a local boy showing em' whats up all over the country. I want to stop by and check out your guys new shop sometime if its cool?

~Bear

[B16crxTurbo]

Yeah I could probably help you out with that when I get home, a .BMP file is an image file sort of like a .JPG. Things are going well so far as far as I know, but I have been gone for 2 months. Kinda funny how small the world really is huh? I think I was the one that actually referred PFI to you... I have know Brent R for a LONG time.

Wow, this is really off topic, sorry Tobi... What's next on the list for project Si?

[HONDA GHANDI]

Tuesday morning MileHighLude is coming over to measure the sunroof for a plexiglass replacement. This will save us some weight. ( actually a lot of weight) sometime next week I am getting in a set of Rota subzero's and Bridgestone Potenza S0-2.
Also I should be getting a Comptech Header in. I am going ot take out the passenger seat as well. Dont really need it for the season. These tings should get me into the 15's consistantly.
Oh yeah, I ordered a Spoon steering wheel, radiator switch and T-stat this week also. For now thats about it. I will put up some pics when the stuff comes in this week.

[B16crxTurbo]

Sweet, those wheels should save you some weight too eh? Any clue what the sunroof and mechanicals weigh? I would guess the plexi that is going to replace it will only weigh a couple pounds at most.

[HONDA GHANDI]

I have weighed one before out of an EG hatch and it was 43 lbs.
Glass, frame, drain tubes and wiring. The wheels I have on there are about 32 lbs each, the rotas are 11 I think. hte car ws 2200 lbs yesterday so by next week i should have it down around 2050-2100. Need to get it to 2000 by the end of the year.
Then next year I can triple the HP and go superfast.

[12seccivy]

you aint doing too bad right now, tobi..
i cant wait till ya start running with the REALLY fast boys!!
if you ever need an extra hand,gimme a buzz. i dont think we live too far apart.. i'm a hop skip away from arvada..
nice job @ bandi.i wish iwould've done as good
:C

[HONDA GHANDI]

Installed 15 inch Rota slipstream Spoon fakers today. with Potenza SO-3's. it feels much snappier than before. Which also could be due to the new Comptech Stainless header I did today. heres a quick peek.
http://tobi.clubrsx.com/rotasi.jpg

[BluByU]

Damn guy, I thought you had to work today? Shit you do things fast, looks nice!

[93BlackHatchSI]

Damn looks good can't wait to see what it will run on Sunday if you go. :)

[HONDA GHANDI]

what color? who knows. just practicing with the photoshop a little bit today. Thinking of some rice colors for the Si.

[Bedlam]

Originally posted by FULLTHROTTLE
what color? who knows. just practicing with the photoshop a little bit today. Thinking of some rice colors for the Si.

bright ricer orange is really where its at..!! (think F&F)

honestly..there was this paint that my dad had once..PPG shiz..called "Russet Mica" it was like...kinda darker red/orange with metal flake. BADASS color...always wanted to see it on a car.

-Bedlam

[B16crxTurbo]

looks nice with the wheels, what happened with the sub-zeros? Did that shave some more weight off for ya?

[HONDA GHANDI]

The sub xeros were not available for a while. went with the Slipstreams because they are a scosh lighter and in stock.
Will see on Friday what the new weight is.

[73Camaro]

Originally posted by FULLTHROTTLE
what color? who knows. just practicing with the photoshop a little bit today. Thinking of some rice colors for the Si.

Wow, that looks exactly like a car that cruises down here. Only he has a huge spoiler, I laugh every time I see him.

[TedR719]

Wow the rota's look better than I thought on the ebp Si.

[HONDA GHANDI]

:( Didnt get my 15 sec ond run tonight.
won three rounds before we ran out of time.
Two I had to break to prevent a heanous breakout situation, the other two runs were piss poor launches.
I sure miss the LSD in the ITR. I have som traction issues to iron out but overall the car ran well. fastest time tonight was a 16.060
with an embarassing 2.45 60 foot. Need to get it back on the alignmnt rack this week and redo it. I aligned it before at fullweight so Im sure it is whacked now.

Nice meeting you Dan and Dan. Good luck this season.

[73Camaro]

I am sure you will get your 15 sec soon. Good luck.

[Bedlam]

Originally posted by 73Camaro600hp
I am sure you will get your 15 sec soon. Good luck.

definately...that car has lots of 15s in it. Just need some better weather and reasonable track conditions. Hard to complain when you are winning right?

-Bedlam

[TedR719]

Put that test pipe on the thing...

[HONDA GHANDI]

need an OBD-I ECM for that. anyone have one lying around?
Anyway, it should happen this weekend at least. all day at the street machine showdown should give me plenty of chances.
Checked the points standings today and that piss poor performance Friday night earned me a second place trophy.!!!

[BluByU]

Originally posted by FULLTHROTTLE
that piss poor performance Friday night earned me a second place trophy.!!!

Score one for the good guys eh?

[HONDA GHANDI]

Well folks, we get to start all over again today. i went to the track to get a little practice with the car before the Avs game tonight and all hell broke loose. On my very first run the left engine mount broke and sent the engine into the hood breaking the hood locks. Of course this didnt happen until I was going 88 MPH through the traps. Te hood came up, smashing hte windshield and roof. It broke the sunroof in on top of my head giving me quite a lump and headache. The worst was I had a little glass in my eye which was promptly washed out by the very quick and professional EMT staff at Bandimere Speedway. Im a little stunned but ok otherwise. without further adue: pictures.....
http://tobi.clubrsx.com/wreck.JPG
http://tobi.clubrsx.com/wreck1.JPG
http://tobi.clubrsx.com/wreck2.JPG
http://tobi.clubrsx.com/wreck3.JPG
http://tobi.clubrsx.com/wreck4.JPG
http://tobi.clubrsx.com/wreck5.JPG
http://tobi.clubrsx.com/wreck6.JPG
http://tobi.clubrsx.com/wreck7.JPG

[BluByU]

God damn that gives me the chills. At least you're allright though. And once the headache is gone, that car will be up and running in no time in your hands! Get better man.

[WinglessTT]

DAMN! That's some scary shit! Glad to hear that you are okay. Kinda sucks about the sunroof. If the old one had been in it probably would have held up. Sorry about that. When you are ready for a new windshield let me know.

[HONDA GHANDI]

Well the car is back together mInus one hood. I ran Friday night ET series with it and went to the quarter finals. the car was more consistant than I have ever seen a honda in my life. It kept getting faster as the night progressed and I broke out in the fourth round by .006. Here are a few of my run stats to illustrate the point:

1st Time trial: .576 RT. 2.454 60ft 16.181 1/4 mile @ 86.75
2nd time trial: .550 RT. 2.450 60ft 16.181 1/4 mile@ 86.80
1st elim. run: .566 RT 2.449 60 ft 16.191 1/4 mile @ 83.55
(the wind picked up a little here and slowed me down at the end.)
2nd run was on the brakes hard so its no good
3rd run .534 Rt 2.443 60 ft 16.094 1/4 mile @ 87.01



Check out my first two time runs. I thought It was a mistake. The car si more consistant without the hood so I think I will keep it off.
Also it is a few pounds lighter this week. it weighs 2255 with me in it and a 3/4 tank of gas. I also went down with my tire pressures to 22 in the front and up to 40 in the rear.

[Bedlam]

yeah it was definately right in there...seemed that you spun the tires a bit on your fastest run? Maybe just a bit different launch or something? Good runs anyway, the weather was JACKED up..it was 92F when we got there...windy as hell...THEN it got all the way down to 68F? Weird day for ET racing..

-Bedlam

[Violator]

That was awesome seeing your car run so soon after the hood decided it wanted to come up. You ran some good times, didnt you run a 15.9 your last run tobi?

[HONDA GHANDI]

Yeah on the brakes. It will go faster when you spin the tires off the launch but it is more inconsistant that way. I would rather be slow and winning then fast and losing.

[Generic]

Damn Tobi, your just kicking ass aren't you. You need to ge tthat thing to hook up! I pull consistent 2.15 60's, and sneak in a 2.0 every now and then. I do have 3 times the Torque you do at 1800 RPM's though... ;)

looks good, hopefully you'll get some traction and get some mid 15's outa it..

Murdock

[HONDA GHANDI]

Thats the problem, If I have REALLY good traction the car doesnt have enough power to pull a good 60 foot. It will run a mid 15 but its with tire spin letting me stay in VTEC through first gear. It is wildly inconsistant though. If I do a no spin, easy launch the car is right on the money just a little slow., At test and tunes I have run 15.6 several times but not all in a row. Its just one of the quirky things about hondas.

[HONDA GHANDI]

Won last night at the Friday night Castrol GTX ET drags.
Car was very consistant and fast. (for me anyway)
I have to wait untilthe points standings come out but I think it was enough to put me from fifth to first in points.

Im starting to get used to this car and I see it becoming a very fast and good ET drag car in the future. Its so damn consistant without the hood I dont think I will run with one again.;)

[TedR719]

Congrats Tobi!

Originally posted by FULLTHROTTLE
Won last night at the Friday night Castrol GTX ET drags.
Car was very consistant and fast. (for me anyway)
I have to wait untilthe points standings come out but I think it was enough to put me from fifth to first in points.

Im starting to get used to this car and I see it becoming a very fast and good ET drag car in the future. Its so damn consistant without the hood I dont think I will run with one again.;)

[Mr. NoSkills]

that's cool tobi, glad to hear it.
my friend's night wasn't that much fun though, broken tranny =(

[HONDA GHANDI]

Thats too bad. Tell him to take it easy on the burnouts, it looked like it was getting a little jumpy on him in the box.

[Mr. NoSkills]

Originally posted by FULLTHROTTLE
Thats too bad. Tell him to take it easy on the burnouts, it looked like it was getting a little jumpy on him in the box.
oh, no, it wasn't him.
it was the guy with the eclipse. he only got one run in and it took a shit on him, fucking sucked.

[forum]

glad to hear you won, wish i had stayed for the whole thing now

:) its nice to know my car can be faster than i expected after seeing violatorrh00 run too

[HONDA GHANDI]

Another class win for project Si last night. Had to beat a couple of realy tough competitors to get there. Only two more events to go, If I dont blow it I have a good chance to win the points championship again.

[V8SpankR]

That Eclipse you raced in the semis was my friend's brother,he told me you got him on the tree pretty good.

[02GTI1.8t]

congrats tobi:Beer:

[Bedlam]

tree pimp! I dont know what the hell "I" was doing last night...it wasnt pretty let me tell ya. Red lights are NOT my friend. Is it bad that I hit 3 .45X's? :p Guess I was a little jumpy.

-Bedlam

[HONDA GHANDI]

Originally posted by V8SpankR
That Eclipse you raced in the semis was my friend's brother,he told me you got him on the tree pretty good.

yeah I remember him, he never really caught up and I was headed for a break out so he got a pretty good view of my brake lights. Then I got a good view of him flying past em at 100 mph.

[MrsGhandi]

You rock!!!!!!-- although since I seem to be your "bad luck" charm, Dusty really wants me to be there next Friday so he has a chance. But you know where my loyalties lie.....;wor;

[HONDA GHANDI]

Well I really wish it were more of a close race between me and him but I am not going to complain about it.

[Dustin]

Originally posted by FULLTHROTTLE
Well I really wish it were more of a close race between me and him but I am not going to complain about it.

:fu: :fu: :fu: :fu: :fu: :fu:

[HONDA GHANDI]

You got one more chance Dustin, but I wont go quietly into the night.

[Dustin]

Originally posted by FULLTHROTTLE
You got one more chance Dustin, but I wont go quietly into the night.

Well, you have me in quite the fuck hole. I admit. But after I lose to you at least I can cruise home in comfort. :gapteeth: I just hope I can make it back 2 back in run tuff.

My only question is what the hell are we going to do every friday all winter?

[HONDA GHANDI]

I dont know man, without a house to party at Im in the Fuck hole now. Guess Ill be hanging out with you and the drunk boy.

[MrsGhandi]

We'll be over at your house a lot if our house gets sold on the 15th. We don't want to hang out at my parents house the whole winter. You better get used to us hanging around!!! :cheers:

[HONDA GHANDI]

God how pathetic is that, a thirty year old that still lives in his parents basement. i am a fucking dork.

[Dustin]

Originally posted by Mrsfullthrottle
We'll be over at your house a lot if our house gets sold on the 15th. We don't want to hang out at my parents house the whole winter. You better get used to us hanging around!!! :cheers:

Barb, If you like to cook and clean, Cory is offering free room & board. You guys are more than welcome to drop by anytime. Except tonight, Cory and Bri are going to the Jewel concert, hahaahhaahha ;gay;

[HONDA GHANDI]

hahahahhhhahhahah

[Dustin]

Originally posted by FULLTHROTTLE
God how pathetic is that, a thirty year old that still lives in his parents basement. i am a fucking dork.

A fucking old dork at that.

[MrsGhandi]

Originally posted by Dustin


Barb, If you like to cook and clean,


I didn't read past that first sentence.....I don't even cook for my own husband so you know what the answer to that is!!

My sentiments exactly hon....hahahahahahahahaha!!!

[HONDA GHANDI]

Well its official, the project Si brought me some sweat, tears, blood and a class championship win in 2002. Thanks to all the support of the members of HAI who have helped in the ressurection of a bright blue doorstop to a bracket racing machine. I would also like to thank My brother for crashing the car, my wife for her unyielding support, and Chris Dye for the majority of the parts and his hard work on the project too.
Thanks to Bandimere speedway for providing the class for imports. It gives the "REAL" racers a place to shine instead of the streets. Finally the class sponsors, Cstrol GTX and Phat-n-low.
Thanks everyone and see you next year.

Stay tuned here to see the winter progress of the car.

[BluByU]

Go Q-tip!

[Violator]

Congrats Tobi, Are you going for the third next year? Same car? Faster?

[BluByU]

It will be supercharged if Hector comes through.

[02GTI1.8t]

congrats tobi, it must feel good

[HONDA GHANDI]

Same car next year but faster and more consistant.

[forum]

damn, i dunno how i missed this one, but congrats tobi

[MrsGhandi]

Originally posted by FULLTHROTTLE
Well its my wife for her unyielding support,



You're very welcome. For those of you who don't know, I don't go to the races because I bring distraction...therefore, Tobi won!

Sorry Dusty....next year you'll have to bribe me to come to the races :D

[MrsGhandi]

Oh, one more thing Tobi....what's with the fruity spiderman????

I keep laughing at all your responses...not for content...but for Spidy getting his groove on....

Too funny! :rofl:

[HONDA GHANDI]

now I got the fruity spidey and the all star super hero dance team. they will rock you and fight crime the gay chorus line way!!!

[MrsGhandi]

Originally posted by FULLTHROTTLE
now I got the fruity spidey and the all star super hero dance team. they will rock you and fight crime the gay chorus line way!!!

YIKES!!!:eek:

[Dustin]

Congrats, T bag on the outstanding season. You may now tattoo my forhead.

Dust ;kiss:

[HONDA GHANDI]

I would rather t-bag your forehead and then weld your eyes shut. (thus the name t-bag)

[TedR719]

hahahahaha

Anyways, congrats on the season Tobi!


Originally posted by FULLTHROTTLE
I would rather t-bag your forehead and then weld your eyes shut. (thus the name t-bag)

[HONDA GHANDI]

Thought I would revive an old friend. A few updates for those who havent seen the progression of the car.
Won The season points chase with the car in its first year.
Went from 2700 lbs to 2020 in first year
went from 16.50 to 13.97 in first year.
went from a bent up three wheeled peice of shit to a bent up four wheeled fast peice of shit.

New for 2003:
CTR LSD
Clutchmasters stage three clutch
Lighter (yes i found more weight to pull out)
JRSC @10 psi
Hondata intake gasket
Energy suspension bushings and mount inserts
Ingalls custom built drag arm suspension
Mr. Alexs motorsports torque damper
TR1 (spoon) lightweight battery
C2tuning high flow thermostat
Electric waterpump
C2Tuning waterpump block off plate
APEXi V-AFC
DOT drag slicks

And Im still weighing te possibilities of Alcohol injection or NOS.
A cage and lexan are in the budget if I have a good sales year.

[Talonstylz]

Nice! First time ive seen this thread, seeing the progress was sweet. What do you think your weighing in at now?

[HONDA GHANDI]

I still have much work to do so I will have ot wait until openng day to see what she weighs.

[b18cya-T]

AWESOME!!!

[exciv2000]

Sweet Tobi, I'd like to see you hit those 12's this season :D

[HONDA GHANDI]

Originally posted by exciv2000
Sweet Tobi, I'd like to see you hit those 12's this season :D

Im gonna have a lot of work to do to hit that. We will see. If I have ot open up the motor this year Ill build it for more boost and NOS/Alcohol injection and then 12's should be attainable. Right now Im looking for a VERY consistant 13 second car. And reliable.

[b18cya-T]

Originally posted by HONDA GHANDI
Im gonna have a lot of work to do to hit that. We will see. If I have ot open up the motor this year Ill build it for more boost and NOS/Alcohol injection and then 12's should be attainable. Right now Im looking for a VERY consistant 13 second car. And reliable.

how much more boost can you run with the JRSC? something like 13 lbs with a CRV pulley? but then theres the heat...ugh...s/c's suck, hehe

[HONDA GHANDI]

IF I build the block I can go to about 16 psi. Then I can put a NOS/Alcohol mix in to cool the air. IT should yield about 350-400 crank hp. Should get me well intot he 12's but Im not going tat route this year. I may just get the car to a point where its super consistant and start on my other projects. I cant afford to build all of my cars at once so I have to do them in stages.

[HONDA GHANDI]

Its been a while since I updated this thread. I thought I would revive it for all the newbies to check out. I am doing some work to it this week and thought I would share.
Bear at Dyno Pro and I are building custom front traction arms. So far I have about $125 invested in them total and they should be lighter and stronger than any aftermarket arms available.

I am also installing a MSD 6BTM timing control unit with a Blaster SS coil. This unit retards timing under boost and is fully controllable.
Along with this stuff is a new steering wheel with Fast & Furious buttons so I can stretch my 13 second runs into 30 or 50 second runs depending on if there is a train coming or not.

I installed set of Poly engine mounts and suspension bushings this winter as well as a Mr.Alex engine torque damper.

Also on the parts list is a B&M oil cooler, CM stage 4 clutch and alum flywheel. CTR LSD and GSR final drive.

I scoreda new trunk and drivers door last weekend as well as a hood last fall so I wont be AS ghetto this season as last. All of this stuff no bdoubt added weight to the car so I am working hard to find more needless items to remove for hte upcoming race season.

[Bedlam]

Hrmm..I guess I missed all the december updates...being in the hospital sucks!

You need to put the other seat back in that thing and take me for a cruise sometime..I'd love to see the reaction you get from people destroying them in a "slow" Civic. Good Stuff.

Definately cant wait to see it at the track this year tho' I was getting to a point where I was mildly consistant in my own Si..and now I get to start all over...yay! :)

Lots of luck with the project car! Any 'vette smoking civic gets my vote.

-Bedlam

[gjcivic]

Originally posted by HONDA GHANDI

Along with this stuff is a new steering wheel with Fast & Furious buttons so I can stretch my 13 second runs into 30 or 50 second runs depending on if there is a train coming or not.



HA HA... F&F button own...:D lol

[BluByU]

That car sure has come a long way! Is lexan still in the future? That would probably make up the loss from the added weight.

[HONDA GHANDI]

Lexan is still in the future plans but maybe not until later this season. I do have 2 seats in it now for anyone who is interested in joy rides.

On a side note, I am trying to get all the work done on it in the next week or two so I can trailer it down to Vegas for their Inagural IDRC event. It would be great to show up at Bandi this year with a few runs in the log books already.

[BoraTurbo]

tobi, i'll road trip it down to vegas with you! i can't wait to race too.

[Maverick]

Tobi before you get the B&M oil cooler kit take a look at perma cool stuff I am sure you get good discounts on B&M stuff but I could probably make a kit using perma cool stuff for cheaper than you would be getting the B&M kit at wholesale. They make sin on adapters for honda engines (http://www.permacool.com/Catalog/Cat_page29.html) 116 and then you have your choice of what kind of filter relocation mount you want to use. Then you can hook up a cooler in line with the filter relocation.

[HONDA GHANDI]

Originally posted by 94hatch
Tobi before you get the B&M oil cooler kit take a look at perma cool stuff I am sure you get good discounts on B&M stuff but I could probably make a kit using perma cool stuff for cheaper than you would be getting the B&M kit at wholesale. They make sin on adapters for honda engines (http://www.permacool.com/Catalog/Cat_page29.html) 116 and then you have your choice of what kind of filter relocation mount you want to use. Then you can hook up a cooler in line with the filter relocation.

Sorry man. I already hav ethe kit. It fits awesome and looks even better. Anyway it was part of a sponsorship deal that I got for winning the season championship last year. Can you say FREEBIE? This is the kit I have. (http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=109784&prmenbr=361)

Billet mounts and stainless steel lines.

[exciv2000]

Any new stuff/pics for this project? BTW, I want one of those intake boxes. Let's talk about it.

[HONDA GHANDI]

no new pics yet, Ive been really busy onthe car the last two weeks. Ill have a few more up today.

[HONDA GHANDI]

a few pics of recent developments.
New ignition system, more inerior weight loss, a few interiormods to make it easier to drive and more pleasing to the eye.
a partially finished traction bar setup. Still waiting for the snow to melt to take it back to DynoPro for more work.
oil cooler/relocated filter.

Oh and a new drivers door and trunklid. Makes it not so ghetto.
http://tobi.clubrsx.com/dashveiw.JPG
http://tobi.clubrsx.com/filter.JPG
http://tobi.clubrsx.com/sparco.JPG
http://tobi.clubrsx.com/trationbar.JPG
http://tobi.clubrsx.com/tractionbar1.JPG
http://tobi.clubrsx.com/tronics.JPG
http://tobi.clubrsx.com/ignition.JPG
http://tobi.clubrsx.com/trunk.JPG
http://tobi.clubrsx.com/newdoor.JPG

[Bedlam]

much better. you just need to get that adhesive off the butt end and wash it up..it would look like every other EBP Si on the road! :)

Looked like it was coming along nicely when I saw it yesterday..glad to see some updates here. I think its time to see what a blown Si is capable of doing in the right hands.

-Bedlam

[HONDA GHANDI]

Yeah, last on the list of stuff to do before the season opens is a fullwash, wax, and vacuum. HTat should save at least two pounds!

[BluByU]

I will lend a hand in the wax if you take me on a joyride! That looks sweet man, nice props on the ECU!

[forum]

wow, looking good, that car kicks ass I can't wait to see it at the track this year :)

[Kwando]

Can't wait to see what it will do this year. You have a fast Si. Keep up the good work.

[MrsGhandi]

Ahhhhh.......my competition.......looks great honey. Can't wait to see it on the track.

[stu]

Looks awesome Tobi. It's hard to look at a car that is nicer than mine, totally stripped of the interior with a big sheet of diamond plating sticking out of the dash. Alex, I want a ride too, but I know that I would't be able to appreciate it as much from the trunk, or laying on my back on the floor looknig at the celling.

[HONDA GHANDI]

It has a passenger seat for now but once competition starts that will be gone again.

[exciv2000]

so how much for that cold air box?

[Mudd]

The only thing that would make that ride better would be some crushed velvet for the dash. No race car is complete without that final detail.

BTW..........For your past assistance you have given me, I have a hook up that will take care of you in securing this fine but very expensive fabric for your dash.

Later

[HONDA GHANDI]

Originally posted by Mudd
The only thing that would make that ride better would be some crushed velvet for the dash. No race car is complete without that final detail.

BTW..........For your past assistance you have given me, I have a hook up that will take care of you in securing this fine but very expensive fabric for your dash.

Later

order me 50 yards, Ill do the entire car. ;)

Originally posted by exciv2000
so how much for that cold air box?

Ill give you my old one if you want, Im not using it this year.
It might need a little polish.

[exciv2000]

Originally posted by HONDA GHANDI

Ill give you my old one if you want, Im not using it this year.
It might need a little polish.

Hell yeah I want it. :D I can polish it up I'm sure.

[HONDA GHANDI]

come get it.

[exciv2000]

I could probably pick it up at that BBQ you're having... revive that thread again so we all know what time it is, I for one have forgotten already :)

[HONDA GHANDI]

I finished the control arms last night and mounted up my BFG Drag radials today. Boyo do they grip.
http://tobi.clubrsx.com/slicks.jpg
http://tobi.clubrsx.com/arm1.jpg
http://tobi.clubrsx.com/arm2.jpg
http://tobi.clubrsx.com/arm3.jpg
http://tobi.clubrsx.com/arm4.jpg

[Talonstylz]

oooo, looks sweet tobi! It'll be fun watchin you wax bubba in his mustang this year, hehe

[HONDA GHANDI]

BTW, anyone want to buy a set of slightly used ;) Bridgestone SO3's?

[TheJackal]

Originally posted by HONDA GHANDI
BTW, anyone want to buy a set of slightly used ;) Bridgestone SO3's?

what size?

[HONDA GHANDI]

195/50 15s

[TheJackal]

Originally posted by HONDA GHANDI
195/50 15s

ah.. too small but if i hear anybody that wants them ill throw them your way

[B20civic]

Originally posted by HONDA GHANDI
BTW, anyone want to buy a set of slightly used ;) Bridgestone SO3's? if they are good, how much you want? :)

[HONDA GHANDI]

make an offer. They were my drag tires last year, they have less than 3k miles on them but have had some hard burnouts on them. Still 80 % tread. No cuts or patches.

[TedR719]

How muchy?

[HONDA GHANDI]

Well folks, i have not updated in a while so here we go:
Took the car to texas in April, ran a best of 13.14 @108 mph. Car broke i the semis, it made goo out of the cataletic converter guts. I didnt find this out until later though. I have a trailer for the queen now so I have been busy pulling more useless guts out of her. I got both right side door side impact beams out nad they are really heavy. Latest weight measurement was 2185 with me in it. 1990 by itself. Im getting a little shit for trailering it to the races because it is so slow still and basically street legal but eh, who cares. She is still one of the fastest, lightest JRSC stock B16s in the country if not "THE" fastest and lightest. No future plans in the works just yet, maybe some fuel system and cam timing work toget some more ponies but nothing major. Peace.

Oh yeah someof the parts are stillfor sale and the tires too.

[Mudd]

Shit Ghandi..........tell em about your package.

In fact start a whole new thread and tell us all about your package.

Brian

[HONDA GHANDI]

Its the nicest package you have ever seen. Thats for sure. On a package scale it is .007 short of being flawless. A couple more of those and I need to start racing Runn Tuff too. Here I come Dustin. ;)

[HONDA GHANDI]

Will this thread hit 5000 veiws? Scary. Who here has read through the whole thing?

[Maverick]

me :cry:

[b18cya-T]

me http://repo.jackmoves.com/albums/album79/wavey.gif

[exciv2000]

me