deedubb
03-07-2005, 09:12 PM
For sale Hardly Used, Excellent condition JL audio 250/1 Mono Amp.
SPECS:
Class D Circuitry
250W RMS @ 1.5 ohms - 4 ohms
THD at Rated Power: <0.05% @ 4 ohm
S/N Ratio: >95dB below rated power
Frequency Response: 5 - 50,000 Hz (+0, -1dB)
Damping Factor: >500 @ 4 ohm/50 Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Differential-Balanced Input Topology: (1 pair of inputs)
On-board Crossover: fully-variable (40-200 Hz), selectable-slope LP (12 or 24 dB per octave)
Preamp Output: 2-channel (full-range, LP or HP)
Bass EQ: variable boost up to 15dB
Infrasonic Filter: defeatable 24dB/octave at 30 Hz
Signal-Sensing Turn-On: permits operation without remote lead
Dual mono speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. Wire
Dimensions: 10.25"L x 9.25"W x 2.36"H
Amplifier Specifications:
Number of Channels: 1 - Mono
RMS Power (4 ohms): 250 watts
RMS Power (2 ohms): 250 watts
RMS Power (1 ohm): N/A (1.5 ohm stable)
Bridged RMS Power: N/A
Peak Power Output: 500 watts approx.
Min. Impedance Unbridged: 1.5
Min. Impedance Bridged: N/A
THD @ Rated RMS Power: 0.05%
Speaker Level Inputs: No
Amp Preamp Outputs: Yes
Built-in Crossover: LP
Bass Boost: 0 - 15dB
Signal-to-Noise Ratio: >95dB
Fan Cooled: No
Fuse Rating: N/A
Paid $280...asking $200 FIRM. Local sale only.
SPECS:
Class D Circuitry
250W RMS @ 1.5 ohms - 4 ohms
THD at Rated Power: <0.05% @ 4 ohm
S/N Ratio: >95dB below rated power
Frequency Response: 5 - 50,000 Hz (+0, -1dB)
Damping Factor: >500 @ 4 ohm/50 Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Differential-Balanced Input Topology: (1 pair of inputs)
On-board Crossover: fully-variable (40-200 Hz), selectable-slope LP (12 or 24 dB per octave)
Preamp Output: 2-channel (full-range, LP or HP)
Bass EQ: variable boost up to 15dB
Infrasonic Filter: defeatable 24dB/octave at 30 Hz
Signal-Sensing Turn-On: permits operation without remote lead
Dual mono speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. Wire
Dimensions: 10.25"L x 9.25"W x 2.36"H
Amplifier Specifications:
Number of Channels: 1 - Mono
RMS Power (4 ohms): 250 watts
RMS Power (2 ohms): 250 watts
RMS Power (1 ohm): N/A (1.5 ohm stable)
Bridged RMS Power: N/A
Peak Power Output: 500 watts approx.
Min. Impedance Unbridged: 1.5
Min. Impedance Bridged: N/A
THD @ Rated RMS Power: 0.05%
Speaker Level Inputs: No
Amp Preamp Outputs: Yes
Built-in Crossover: LP
Bass Boost: 0 - 15dB
Signal-to-Noise Ratio: >95dB
Fan Cooled: No
Fuse Rating: N/A
Paid $280...asking $200 FIRM. Local sale only.