90 civic swap

[CivicTy]

What exactly do i need for my swap? I have B18 out of a 94 Intregra & Limited Slip cable tranny. I know i need motor mounts and a shift linkage. What else is there normally?

[HONDA GHANDI]

Axles, ECU.

[B20badboy]

If it is going into the 4th gen civic then you will need a modified exhaust and modified shift linkage, if it was a model lower than the si you need an injector resistor box, b-series radiator hoses. If it is going into a crx you might have to change the front hubs to either si or integra hubs to fit the axles, if you go integra then you need to have 14" wheels or bigger.

[CivicTy]

The car is a '90 hatchback. Will I have to go from dual port to multi port injection? I had a buddy that said something like that.

[B20badboy]

Unless it is an Si model if you look at your motor and the top of the intake manifold says dual point then yes. An injector resistor box is like only 10 dollars you can keep your front brakes/hubs the teg axles will fit. All you need is the stuff mentioned above.