dsm stuff

[dsm king]

Hi my name is Ryan im new to the site and Ive got a bunch of 1st gen DSM stuff to get rid of. Ive got a full interior out of a turbo talon. The color is black/grey, really good condition. Side windows with tint and motors on the tracks, no cracks really good condition. A head with about 100,000 miles on it works great no lifter tick, with cam gears, cams, rockers, valves, lifters, and head bolts with washers. Two 14b turbos. one is ported and clipped seven degrees on the exhaust side, needs rebuild. The other is in excellent condition, NO SHAFT PLAY WHATSOEVER, ive got tons of stuff. Email me for pics and questions. If you need it ive probably got.

[Zach]

how much for the 14b turbos? would appreciate price on both

[Mario]

Injectors w/ resistor box.

[dsm king]

lets see, for both ill let 'em go for like 250? plus shipping, and ill throw in another 14b exhaust side with wastegate. Do you need the manifold with lines too? or just the turbos?

[dsm king]

For the injectors with the resistor box ill go 200 plus shipping. if that works for you

[Zach]

well, i really only need a turbo, i was just wondering if it would be more cost effective to rebuild the turbo, or buy the one in good condition. how much for each one was the question iwas trying to ask, it came across wrong though

[dsm king]

for the ported and clipped snail that needs rebuild ill sell it for 125 just because of the porting and clipping. And the other for 175. I would say rebuilding would cost the same if not more than the good condition one due to labor and shipping, not to mention the down time cause id guess it would take a few weeks total for the whole process.

[DSMxSteve]

At that point woudnt it just be cheaper to buy a 16g?

[dsm king]

than having to rebuild the turbo? Maybe it depends how much the 16g is and how much the cost is to rebuild with shipping and all the other fun stuff associated with that

[Mario]

For the injectors with the resistor box ill go 200 plus shipping. if that works for you

For that much I can get cleaned, balanced, and blueprinted RC injectors. I'll offer about the average going rate for DSM injectors... $50.

[dsm king]

i really dont know the going rate for injectors so i just kinda threw somethin out there, but yea ill take 50

[Mario]

i really dont know the going rate for injectors so i just kinda threw somethin out there, but yea ill take 50

Awesome. Send me a PM when you are available, where we can meet at, and also if you have mileage on those that'd be great. Thanks. :)

[Zach]

for the ported and clipped snail that needs rebuild ill sell it for 125 just because of the porting and clipping. And the other for 175. I would say rebuilding would cost the same if not more than the good condition one due to labor and shipping, not to mention the down time cause id guess it would take a few weeks total for the whole process.
yeah, i was just wondering. ill keep you posted when i get some money

[dsm king]

sounds good

[DSMxSteve]

than having to rebuild the turbo? Maybe it depends how much the 16g is and how much the cost is to rebuild with shipping and all the other fun stuff associated with that
Going rate for a 16G is like 350-500. Have you seen how much it costs to rebuild a turbo correctly? Not cheap.

[dsm king]

yea i got my big 16g for 350, and no its not cheap at all

[Zach]

where did you find a 16g for 350?

[dsm king]

on dsmtrader.com

[DSMxSteve]

I may have a 16G for sale here in the very near future for sale as well

[Zach]

let me know when it does go for up for sale

[doctorstupid]

Is the turbine housing for the good 14B cracked at all? Specifically around the wastegate. I assume it spins like butter and shows no signs of blowing oil, correct?

[dsm king]

i dont see any cracks and yeah it spins smooth, theres like the TINIEST amount of shaft play EVER. Theres not really any oil on it at all, its really clean

[Mario]

Bump for a good guy and good seller. :)

[dsm king]

what does bump mean? thanx