PDA

View Full Version : George vs. Evolution VIII


Juztin
02-09-2005, 10:52 PM
George was on his way to the BW3's meet although very late. When turning west onto the road that runs right by BW3's, George had come behind a Black Evo 8 w/ aftermarket exhaust and what sounded like an aftermarket BOV. George had got into the left hand lane next to the Evo and drove past it. The Evo then proceeded to keep right behind George. The Evo then started blurping the throttle to see if George wantedt o run. George checked out the road, was clear all the way down to Austin's house, so he went ahead and started to slowly get on the throttle to let the Evo driver he's up for a little fun run. Once the EVO got on it, George slammed the gas. The Evo 8 started to immediately fall behind as George got on the gas. From 35-90 the Evo fell behind 2 car lengths and was falling behind very consistently. George let off as the speeds already being reached were dumb to be going on any regular street. George eventually pulled over with the guys in the Evo 8. Pretty young guys but cool. Had a sweet ride, George wishes he could have one :)

EDIT:
George then then threw a U-turn to head east back to BW3's, and the Evo 8 also turned with him to get in one last run. George waited for the Evo 8 to get on it, and the Evo 8 got a little jump. George slammed on the gas and the Evo 8 stopped right at George's passenger door and started to fall back. George was pulling pretty good and the Evo 8 fell back about a car and a half but the fun run ended pretty quick to try and keep the speeds down. This was George's first time running against a stock-ish Evo 8. He has run one yellow one before that had the PSI bumped up, and that was a no contest lol, talk about Geroge getting raped by that one :) . George thought the Evo 8 sounded awsome with the loud as BOV going of between the Evo's shifts. Geroge thanks the Evo for some fun runs! The guys didn't know about HAI, but now they do ;) George was suprised how the race turned out :)

redb20teg
02-09-2005, 11:08 PM
What car does George have?

Juztin
02-09-2005, 11:20 PM
350z :)

RiceNmotioN
02-10-2005, 12:08 AM
Weak! my toyota t-100 can beat that... NICE WIN!

Juztin
02-10-2005, 06:33 AM
hahahah, damn man how many cars do you have!

floored4door
02-10-2005, 10:10 AM
Nice kill. What BOV was he sportin?

ryanman
02-10-2005, 10:17 AM
Bullshit. You didn't pull an EVO 8.

redb20teg
02-10-2005, 10:43 AM
is it a stock 350z??

ryanman
02-10-2005, 10:44 AM
If it is Juztins no it's not stock but it's not force inducted either.

STIBungy
02-10-2005, 12:24 PM
It was prolly an OZ Rally Edition with an electronic BOV

floored4door
02-10-2005, 12:37 PM
Hangin with a 350z hahahahhah! What are those heavy to hung?

Juztin
02-10-2005, 01:19 PM
If it is Juztins no it's not stock but it's not force inducted either.

Yeah i wish i was twin turbo. I was suprised when I ran the guy, thought it would of been faster. I'm not stock, pushen about 25 more horses than a regular Z. But it was cold last night and the car was sure running really nice :) Although still rich as hell judging by the black smoke I could see with his HID's in my rear view mirror as they drifted away :)

Juztin
02-10-2005, 01:20 PM
Bullshit. You didn't pull an EVO 8.

Bullshit! You don't own a 100,000 dollar speed boat!

Juztin
02-10-2005, 01:22 PM
Nice kill. What BOV was he sportin?

Didn't ask him when I was talking to him, sounded greedy, i mean greddy ;) Definately audible that he was running some boost. Sounded awsome, but I think I'm getting to that point where i would prefer are more low profile BOV.

Th3Cleaner
02-10-2005, 01:22 PM
I added 25 more lbs to my car and pulled 1 plug so, it wouldnt be so fast :-)

Juztin
02-10-2005, 01:25 PM
is it a stock 350z??
nope > nismo cams, nismo headers, crawford Z plenum, kinetix test pipes, borla true dual exhaust (fixed),UR pulleys. Have a JWT intake for it as well, but swapped the stock intake box back on because i was too lazy to clean the jwt. Might as well get around to that sometime. I got almost every bolt-on known to a Z'er, but all that dude has to do is put on a BC and it's over, I'm left in the dust :)

EDIT:
I still got plans for putting in a tilton street flywheel/clutch (extremely light), and shorter R&P in the diff along w/ a nismo LSD to stop the 1 wheel wonder spin

reason why i won't TT it yet: 20,000 dollar entry price to do it right
*Darton mid sleeve inserts
*patuer rods
*arias pistons
*arp stud kit
*AAM fuel system
*greddy TT kit w/ IC
*titanium spring retainers &
*jwt spring incase i wanna riase the rev limiter to the 7200 mark. (wouldnt feel very comfortable going higher w/ boost tho)
*720cc injectors
*boost, egt defi guages
*good wideband with datalogging cap & gauge
*BEEFY clutch/flywheel (ACT, RPS, OS Giken, Tilton triple carbon clutch & fly)
*Stage 5 half shafts
EDIT#2 *Since so much engine work is being done, might as well run a port and polish of the head and lower plenum, or heck, go with 1mm oversized valves...
*LABOR/TUNING

Juztin
02-10-2005, 01:26 PM
I added 25 more lbs to my car and pulled 1 plug so, it wouldnt be so fast :-)

pulled one of your spark plugs? why!? how is that power band on 5 cylinders? :)

Dave_L
02-10-2005, 01:31 PM
a nismo LSD to stop the 1 wheel wonder spin
I already have LSD....stock.:cool:

Th3Cleaner
02-10-2005, 01:36 PM
pulled one of your spark plugs? why!? how is that power band on 5 cylinders? :)
heheh jhea.. You know I was kidding right? :Peace:

Juztin
02-10-2005, 01:36 PM
I already have LSD....stock.:cool:

Damn Nissans, i want a beemer :cool:

Dave_L
02-10-2005, 01:37 PM
heheh jhea.. You know I was kidding right? :Peace:
Are you still stock Duane?

Th3Cleaner
02-10-2005, 01:37 PM
dammit Justin, one of us has to do somthing to these Z's...

Juztin
02-10-2005, 01:38 PM
heheh jhea.. You know I was kidding right? :Peace:

hahaha, you never know what the heck Dwane's up to! Hey did you ever figure out what the brake issue was when the pads were changed?

Th3Cleaner
02-10-2005, 01:40 PM
I have the Nismo catback 3" Stainless exshuast ... and a real nice sound system... I have shitty ass tracking.. I put on new rear tires 245/45 and they just suck ass.. extremly pissed at my rear tire spinning machine and No LSD

Dave_L
02-10-2005, 01:42 PM
I have the Nismo catback 3" Stainless exshuast ... and a real nice sound system... I have shitty ass tracking.. I put on new rear tires 245/45 and they just suck ass.. extremly pissed at my rear tire spinning machine and No LSD
We should race sometime. I only have intake and exhaust and we are supposed to be pretty close in performance. I have never had a chance to race a 350z yet.

Th3Cleaner
02-10-2005, 01:42 PM
Ya the break problem was this, NIssan does not want you to drive your Z. period.
I replaced the rotors and pads on all 4

*should have purchased a WRX !!! lol

Although my 350 is still the best looking around :-)

Juztin
02-10-2005, 01:44 PM
Did you resurface the rotors when putting the new pads on? Didn't sound like you had an issue before you started that. My brakes still sqeek like hell, that's the only complaint i have about the Z, aside from having to do warranty work once a month :)

Juztin
02-10-2005, 01:46 PM
dammit Justin, one of us has to do somthing to these Z's...

Yeah, in about 4-5 months I'll be setup to start modding the Z again. Gonna finish off my driveline N/A mods before I start aquiring all the turbo stuff.

Th3Cleaner
02-10-2005, 01:49 PM
We should race sometime. I only have intake and exhaust and we are supposed to be pretty close in performance. I have never had a chance to race a 350z yet.
You will beat me all I need to do is let out on the clutch :-) and my rear tires spin 1st -3rd

Th3Cleaner
02-10-2005, 01:52 PM
Yeah, in about 4-5 months I'll be setup to start modding the Z again. Gonna finish off my driveline N/A mods before I start aquiring all the turbo stuff.
I would seriously think about a major MOD, but the issue is, I dont know any Certified people here who could help me. If I had the room to work (I only have a single car garage ) maybe it would be easier, but alais..I am a computer tech/nerd not a mechanic. I would seriously think about a SC or a Turbo, if I knew I had help installing it.

STIBungy
02-10-2005, 01:59 PM
I'll ask Harold if he wants to partake.

We should race sometime. I only have intake and exhaust and we are supposed to be pretty close in performance. I have never had a chance to race a 350z yet.

ryanman
02-10-2005, 02:01 PM
Bullshit! You don't own a 100,000 dollar speed boat!
You're right, it's an offshore fishing boat.

Dave_L
02-10-2005, 02:02 PM
I'll ask Harold if he wants to partake.Hmmm....what the hell. Its worth a try.

LeonZ
02-10-2005, 04:19 PM
*should have purchased a WRX !!! lol


lol