T3/4 Turbonetics Turbo & Misc KA24DE parts

[BLKTOP240]

I have a 95 nissan, did have the t3/4 kit with 550cc fuel injectors, Jim Wolf ECU, all for the KA24DE everything must go..email me

[TheJackal]

what trim is the turbo, t3/t4 could mean 150hp or 600hp

[BLKTOP240]

Honesty, I couldn't tell ya, I bought the car with the turbo, boosted the ka24 and popped it like a big greasy pimple. I called Turbonetics today and they want 500 to rebuild, and 1500 new, I figure it's got a year or so's use on it. My son wants me to rebuild and install it when my sr20 is installed in my 240sx in the next couple of weeks. Now, that i visted the turbonetics website agian, I have a better idea what "trim" means... I have no clue...but I'll call turbonetics and see if they have record or a way of finding out. I'll also repost tomarrow with more info... late.

[STIBungy]

It may be stamped on the housing.

[Turbo240sxt]

do you happen to have a spare ka24de block? i have a boosted sohc and want to start building the dohc... let me know!!


Anthony...

[smokie]

what kind of turbo header do you have and how much is it? what about the intercooler? what shape and how much?

[BLKTOP240]

Block? Yes got that, the 1st or 4th cylinder has scoring, otherwise the block is fine...I have the whole engine, which also has ARIAS Forged Racing Pistions with paperwork.0040 clearance ect... . The intercooler is staying (sorry folks) I'm not sure about the turbo header, I'd be happy to let ya look at it take some digital photos and email them...AIM me at blacktop240sxco for more details.

Troy

[Turbo240sxt]

how much do you want for the block? well first how bad is it and is it fixable?
if not how much do you want for the one w/forged pistons? AIM me at Turbo24sxt.

[BLKTOP240]

it's re-buildable, the block is good just needs a cylnder sleeve and I would guess rings and a gasket kit.... I would rebuild the entire engine, didn't get as far as looking at the bottom end of the engine..bearing ect.... with the forged pistions...200.00 / OBA? The only two parts I'm keeping is the intercooler and a/c pump.

[bigturbo]

so how much for the turbo and did you figure out what trim it is and or a/r ratio would be nice. Better yet snap a pic of it.

[Turbo240sxt]

hey man thanks for the motor ... its going to work out awesome ... i got the a/c/ compressor off for ya ... again thanks ...

Anthony

[BLKTOP240]

Looks like the Turbo, the Jim Wolf ECU (with paperwork/org reciept) and possibly the the exhaust/Deltagate wastegate are the only items left. Still not sure of the trim. Perhaps someone could tell from the numbers on it (20357 and D0702) and the attached pictures. Sorry there's no pictures of the exhaust, it's in Parker with the car. The exhaust was was installed by Collins muffler in Ft. Collins.. nothing to special. The Jim Wolf ECU is also in Parker. I will be making a trip there on wednesday or friday. I'm thinking 500.00 for the turbo. 400.00 for the JW ECU, if the wastegate hasn't already been sold, whatever's fair..

[BLKTOP240]

ok, so the pictures where way to big. IM me on AIM or email me...I send them to ya..

[240addiction]

hey,
MAC said that you might be getting rid of the intercooler but they were not sure, so I thought I would ask . by the way your car is awesome and I hope that they find a black top for you . let me know thanks Paul

[MirageZ31]

do you happen to have a spare ka24de block? i have a boosted sohc and want to start building the dohc... let me know!!


Anthony...
Shu(RiceNmotioN) is trying to sell two if you want to send him a PM or something.

[typeyc]

hey do you still have the motor.

[S15SiLVia]

I sure hope he sells a engine before 2 years

[M@]

hey do you still have the motor.
Tool.

BAN!