cleaning garage....

[Pang]

12:1 Vortech FMU.....90
HKS SSQ BOV Flange (aluminum........30
98 Integra LS gauge cluster with 68,xxx miles ......75
96 Civic CX seats, front and rear, clean....100
Golden Eagle Sleeved B16a, Used, Stock bore, oil pan and crank included, etc.....500
Clutchmater stage 3 clutch with 5k miles on it, good shape....200
Misc b and d series mounts, alternators, ac compressors....let me know what you need
Tial 38mm wastegate with 1bar spring, polished, used for a few months.....170

[egdohcvtec]

i want to check out the block..
how many miles??

[Weston]

What's the fitment on that clutch? Is it in good shape?

[DiSekt]

Happen to have the front motor mount for a D-series?

[dnunn187]

Yes wanna check out the block 2 pang, around the weekend tho.If it dont sell i will give you a call.

D.

[B20badboy]

12:1 Vortech FMU.....90
HKS SSQ BOV Flange (aluminum........30
98 Integra LS gauge cluster with 68,xxx miles ......75
96 Civic CX seats, front and rear, clean....100
Golden Eagle Sleeved B16a, Used, Stock bore, oil pan and crank included, etc.....500
Clutchmater stage 3 clutch with 5k miles on it, good shape....200
Misc b and d series mounts, alternators, ac compressors....let me know what you need
Tial 38mm wastegate with 1bar spring, polished, used for a few months.....170
Hey pang would you let the Wastegate go fo like $150 and I will meet you for pickup> Is it polished? What PSI is 1bar?

[floored4door]

Hey man says above it is polished. 1 bar is like 15 psi I believe.

[B20badboy]

Hey man says above it is polished. 1 bar is like 15 psi I believe.
My bad didnt see that been a long day, Are you still going to get that skunk2 manifold or what. I have the head right now on ebay but someone is interested in the whole swap let me know.
Pang sorry bout that not trying to screw up your thread let me know bout the offer you can keep the spring I need a 7~8 PSI one what Toby said.

[Prelude97]

hey pang im interested in that guage cluster

[Pang]

i want to check out the block..
how many miles??

PMed you back

[Pang]

What's the fitment on that clutch? Is it in good shape?
Yes, in good shape. Came out of my old Si with approximately 6k miles on it. A friend I sold my Si to totaled it, so it was parted..

[Pang]

hey pang im interested in that guage cluster

Scott, call me. Do you have my #? If not get it from Shane or PM me

[Pang]

My bad didnt see that been a long day, Are you still going to get that skunk2 manifold or what. I have the head right now on ebay but someone is interested in the whole swap let me know.
Pang sorry bout that not trying to screw up your thread let me know bout the offer you can keep the spring I need a 7~8 PSI one what Toby said.

I can do 150 if i keep the spring.

[Pang]

Happen to have the front motor mount for a D-series?

Which front?

[B20badboy]

I can do 150 if i keep the spring.
Cool call me and set up a time this weekend 303.956.6821 and will you take another $25 off for a t3/t4 Stainless flange for welding its been lazer cut I can show it when we meet if not its still a deal.

[floored4door]

My bad didnt see that been a long day, Are you still going to get that skunk2 manifold or what. I have the head right now on ebay but someone is interested in the whole swap let me know.
Pang sorry bout that not trying to screw up your thread let me know bout the offer you can keep the spring I need a 7~8 PSI one what Toby said.

Still trying to get the money together. Christmas is a pain and so are bills. I will keep you posted.

[Pang]

Cool call me and set up a time this weekend 303.956.6821 and will you take another $25 off for a t3/t4 Stainless flange for welding its been lazer cut I can show it when we meet if not its still a deal.

Probally not, I get those flanges CNC'ed for not even half that. Give me a call when you get a chance, i'll most likely forget.

[egdohcvtec]

pm sent