really sloppy,loose steering?

[TedR719]

Last week my passenger side lower ball joint came off while i was taking a turn and my lower ball joint broke and i had to fix this in the middle of the street. this all could have been avoided had i put the dam COTTER pin in the nut.

Anyways I just fixed both lower ball joints today. ever since then my steer has been really sloppy especially taking right turns but overall the steering is just really loose i can tell a big diffeence.

Are there some things you can tell me to change or fix to get my steering back to normal? I want my tight steering back and dont want to risk braking something again :cry:

Its a manual rack if that helps...

[TedR719]

Well it looks like the upper ball joints are shot. So I will have to replace those...

[HONDA GHANDI]

I was going to say, start looking for more damage. Loose steering isnt caused by poor adjustment.

[TedR719]

Do you have experience with upper camber kits? I'm about to order the Skunk2 for $173.00, any other you would recommend?

[HONDA GHANDI]

Do you have experience with upper camber kits? I'm about to order the Skunk2 for $173.00, any other you would recommend?

Yes. I recommend the Ingalls units.

[TedR719]

Can you still get their products? Or Chris? If so how much for them... and does the ingalls include the new ball joints?

[HONDA GHANDI]

Chris still sells them. Get the part number you need off their website and shoot chris a PM.

[TedR719]

Chris still sells them. Get the part number you need off their website and shoot chris a PM.

Thanks